71 producten
71 producten
Sorteer op:


Medallions - Holographic Geode Rocks
€28,95 EUR
Eenheidsprijs PerMedallions - Holographic Geode Rocks
€28,95 EUR
Eenheidsprijs PerSilicone mold for a set of eight Holographic (napkin ring) medallions, in the shape of Geode Rocks. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.
These medallions are the same as our normal Geode medallions, but then with a Holographic color effect, which will transfer to the surface of your resin medallions.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.


Holographic Geode Winebutler for 2 glasses
€19,95 EUR
Eenheidsprijs PerHolographic Geode Winebutler for 2 glasses
€19,95 EUR
Eenheidsprijs PerSilicone mold for a Holographic Geode winebutler, for two glasses. The winebutler is 8 mm (1/3") thick.
The shape of the winebutler is the same as our normal Geode winebutler mold, but then with a holographic color effect, which will transfer to the surface of your resin winebutler.

Inlay mold - Holographic Hexagon (M)
€17,95 EUR
Eenheidsprijs PerInlay mold - Holographic Hexagon (M)
€17,95 EUR
Eenheidsprijs PerHolographic silicone inlay mold, hexagon shaped. The size of the inlay mold is 19 x 22 cm ( 7 1/2" x 8 2/3") and it is appr. 4 mm (1/6") thick. The inlay mold has a holographic color effect, which will transfer to the surface of your Hexagon tray.
The inlay is specifically matched to the size of our 23 cm (9") Medium Hexagon tray (item MOSH0192) and the thickness of this inlay mold makes it easy to create a tray with raised edge, by using that tray mold.
There is also an inlay mold with a honeycomb engraving available, that has the same size, as shown in one of the pictures (for illustrative purposes, this item is only for the Medium sized holographic inlay mold).

Tealight Candle holder - Holographic Yin Yang symbol
€19,95 EUR
Eenheidsprijs PerTealight Candle holder - Holographic Yin Yang symbol
€19,95 EUR
Eenheidsprijs PerSilicone mold for a Tealight Candle Holder with the Holographic Yin Yang symbol. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The symbol is raised on the surface.
The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.
We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.
We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration, see the pictures. A few of them are pictured in their finished state.

Set of 2 molds - Holographic Hexagon coasters with holder
Set of 2 molds - Holographic Hexagon coasters with holder
Set of two silicone molds for 4 Holographic Hexagon coasters and a matching holder. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The matching holder can hold four Hexagon coasters of 8 mm thick.
The silicone molds have holographic color effects, which will transfer to the surface of your resin artwork. Both molds are also in a normal version available, without holographic effect.
The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Medallions - Holographic Fantasy
€28,95 EUR
Eenheidsprijs PerMedallions - Holographic Fantasy
€28,95 EUR
Eenheidsprijs PerSilicone mold for a set of eight Holographic Fantasy (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.
These medallions are the same as our normal Fantasy medallions, but then with a holographic color effect, which will transfer to the surface of your resin medallions.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Set of 3 molds - Holographic Fantasy coasters with holder and tray
Set of 3 molds - Holographic Fantasy coasters with holder and tray
- a set of four Fantasy coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
- a matching holder. The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
- a large Fantasy tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.
These silicone molds have holographic color effects, which will transfer to the surface of your resin artwork. The molds are also in a normal version available, without holographic effect.

Flower Arranger (5 holes) - Holo Broken Glass
€19,95 EUR
Eenheidsprijs PerFlower Arranger (5 holes) - Holo Broken Glass
€19,95 EUR
Eenheidsprijs PerSilicone mold for a Flower Arranger with a Holographic Broken Glass pattern. The Flower Arranger is 17 cm (6 2/3") wide and the holographic color effect will transfer to the surface of your resin flower arranger.
It's a known 'problem', you sometimes get a nice little bouquet of flowers, but you only have a vase that is too big to put them in. Then this Flower Arranger will be an outcome, because now you will be able to arrange the flowers nicely in that large vase.
This flower arranger mold has 5 holes and the same design is also available in a smooth version, without pattern (one of the pictures shows the smooth version 'in action').
There is also a 'Holo Broken Glass' version with 9 holes available.

Holographic Magical tray (L)
€44,95 EUR
Eenheidsprijs PerHolographic Magical tray (L)
€44,95 EUR
Eenheidsprijs PerSilicone mold for a large Holographic Magical tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.
The mold has a holographic color effect, which will transfer to the surface of your resin artwork.
We also have holographic Magical molds available for coasters and a coaster holder, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Magical tray mold).
We also have Magical trays available in a normal version, without the holographic color effect.

Holographic Decoration egg (large)
€21,95 EUR
Eenheidsprijs PerHolographic Decoration egg (large)
€21,95 EUR
Eenheidsprijs PerSilicone mold for a large Holographic Decoration egg, that can for instance be used to decorate Easter branches or a tree. The egg is 20 cm (8") tall and 6 mm (1/4") thick. The holographic color effect will transfer to the surface of your resin egg.
We also have molds for smaller decoration eggs (including a holographic one) and a tray in our collection.

Holographic Halloween Ghost keychains - 8 pcs
€24,95 EUR
Eenheidsprijs PerHolographic Halloween Ghost keychains - 8 pcs
€24,95 EUR
Eenheidsprijs PerBOO!
Silicone mold for 8 Holographic Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression. The holographic color effect will transfer to the surface of your resin ghost keychains!
The mold is also available in a version without the holographic color effect.

Tealight Candle holder - Holographic with Decorative corners
€19,95 EUR
Eenheidsprijs PerTealight Candle holder - Holographic with Decorative corners
€19,95 EUR
Eenheidsprijs PerSilicone mold for a Holographic Tealight Candle Holder with decorative corners. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The decoration is raised on the surface.
The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.
We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.
We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Set of 2 molds - Holographic Geode Coasters with holder
Set of 2 molds - Holographic Geode Coasters with holder
Set of 2 Holographic silicone molds for 4 Geode coasters and a matching holder. The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for these coasters and both molds have a holographic color effect, which will transfer to the surface of your resin coasters.
The molds are also available separately.
You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Holographic Christmas Angels - 6x (small)
€33,95 EUR
Eenheidsprijs PerHolographic Christmas Angels - 6x (small)
€33,95 EUR
Eenheidsprijs PerSilicone mold for 6 small Holographic Christmas Angels. Each Angel is 10 cm (4") tall, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas angels.
We also have a mold available for 4 Holographic Christmas Angels of 15 cm (6") each, see one of the pictures (for illustrative purposes, this item is only for the mold with 6 Christmas Angels).
Both molds are also available in a version without the holographic color effect and in a version with druzy crystal Angel wings.

Holographic Halloween Pumpkin keychains - 7 pcs
€23,95 EUR
Eenheidsprijs PerHolographic Halloween Pumpkin keychains - 7 pcs
€23,95 EUR
Eenheidsprijs PerSilicone mold for 7 Holographic Halloween Pumpkin keychains. The pumpkins are 6 mm (1/4") thick, 5.7 cm (2 1/4") wide and 6 cm (2 1/3") tall. Each pumpkin has its own engraved facial expression and the holographic color effect will transfer to the surface of your resin pumpkin keychains.
There are 2 other versions of the pumpkins available, both without a holographic color effect: a 'Halloween' version with engraved faces and a 'plain' version, without engraved faces.
One of the pictures shows all 3 molds (for illustrative purposes, this item is only for the 'Holographic Halloween' pumpkin mold).

Holographic Fantasy tray (S)
€24,95 EUR
Eenheidsprijs PerHolographic Fantasy tray (S)
€24,95 EUR
Eenheidsprijs PerSilicone mold for a small Holographic Fantasy tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.
The mold has a holographic color effect, which will transfer to the surface of your resin artwork.
The same shape of this holographic tray is also available in a large size of 28 cm (11").

Holographic Magical tray (S)
€24,95 EUR
Eenheidsprijs PerHolographic Magical tray (S)
€24,95 EUR
Eenheidsprijs PerSilicone mold for a small Holographic Magical tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.
The mold has a holographic color effect, which will transfer to the surface of your resin artwork.
The same shape of this holographic tray is also available in size Large 28 cm (11") .

Medallions - Holographic Hexagon
€28,95 EUR
Eenheidsprijs PerMedallions - Holographic Hexagon
€28,95 EUR
Eenheidsprijs PerSilicone mold for a set of eight Holographic Hexagon (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.
These medallions are the same as our normal hexagon medallions, but then with a Holographic color effect, which will transfer to the surface of your resin medallions.
This medallion mold can be used together with our mold for the Hexagon (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Holographic iPhone Telephone stand
€19,95 EUR
Eenheidsprijs PerHolographic iPhone Telephone stand
€19,95 EUR
Eenheidsprijs PerSlicone mold for a Holographic telephone stand. We call this specific effect 'Crazy Holo' and the holographic color effect will transfer to the surface of your resin telephone stand.
The stand is 6 mm ( 1/4") thick and the space above the edge is 80 mm (3 3/5") wide and 130 mm (5 1/10") high.
The same design is also available in a regular version, without holographic effect.

Business card holder Landscape - Holo Broken Glass
€18,95 EUR
Eenheidsprijs PerBusiness card holder Landscape - Holo Broken Glass
€18,95 EUR
Eenheidsprijs PerSilicone mold for a Business Card holder with a Holographic Broken Glass pattern. The holographic color effect will transfer to the surface of your resin card holder. The holder is 5 mm (1/5") thick and 70 mm (2 3/4") wide, suitable for landscape Business Cards (European and American dimensions).
The same design is also available in a smooth version, without pattern.