Sorteer op:
13 producten
13 producten
Siliconen mal voor een middelgrote tray met een Yin Yang er in gegraveerd. Twee zonnebloemen vormen het symbool en dezelfde Yin Yang is ook gebruikt in de mal voor de vier ronde Yin Yang onderzetters. De tray is 25 cm breed en 8 mm dik.
De tray is ook in een 35,5 cm grote XL versie verkrijgbaar, zie één van de foto's voor een vergelijking van de twee maten (ter illustratie, dit item is alleen voor de tray van 25 cm).
Siliconen mal voor een XL tray met een Yin Yang er in gegraveerd. Twee zonnebloemen vormen het symbool en dezelfde Yin Yang is ook gebruikt in de mal voor de vier ronde Yin Yang onderzetters. De tray is 35,5 cm breed en 8 mm dik.
De tray is ook in een 25 cm grote versie verkrijgbaar, zie één van de foto's voor een vergelijking van de twee maten (ter illustratie, dit item is alleen voor de tray van 35,5 cm).
Silicone mold for a Tealight Candle Holder with the Holographic Yin Yang symbol. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The symbol is raised on the surface.
The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.
We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.
We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration, see the pictures. A few of them are pictured in their finished state.
Silicone mold for a large shiny Tree of Life symbol. This mold has two layers, a round base of 26.5 cm (10 2/5") wide and 8 mm (1/3") thick and the tree of life which is 25 cm (10") wide and 7 mm (3/10") thick. This makes the total symbol 26.5 cm (10 2/5") wide and 15 mm (3/5") thick.
The iconic Tree of Life symbolizes growth, balance and harmony. Use your artistic talents to create a beautiful and unique symbol, embrace your inner tree hugger and add a touch of whimsy to every room.
We also have (a smaller) Tree of Life mold available which has a matte finish, perfect to use with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders.
Silicone mold for a medium sized matte Tree of Life symbol. This Tree of Life is 20 cm (8") wide and 15 mm (3/5") thick.
The iconic Tree of Life symbolizes growth, balance and harmony. Use your artistic talents to create a beautiful and unique symbol, embrace your inner tree hugger and add a touch of whimsy to every room.
!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Tree of Life, it will have a matte finish, as shown in some of the pictures.
We also have (a larger) Tree of Life mold available which has a glossy finish, perfect to use with epoxy resin.
Siliconen mal voor het Hamsa symbool. De Hamsa representeert de hand van Fatima en het symbool staat voor geluk maar ook voor steun en de deugden geduld en trouw. Het is ook een afweer tegen het boze oog, om deze reden zit er in het symbool een oog. Deze Hamsa is 16 x 19 cm en 8 mm dik. Deze Hamsa heeft een verhoogde rand, het kan onder andere als sieraden tray gebruikt worden.
We hebben dezelfde Hamsa, ook beschikbaar zonder verhoogde rand.
Siliconen mal voor een XL Mandala tray met het AUM symbool er in gegraveerd. De tray is 35.5 cm in diameter en 8 mm dik.
Het AUM symbool vertegenwoordigt de trilling, geluid en bewustzijn van het universum. Het is de plaats waar alle geluiden en trillingen ontstaan en wordt vaak gezongen aan het begin en het einde van het beoefenen van Yoga en wordt veel gebruikt tijdens de meditatie.
Silicone mold for a Holographic Tealight Candle Holder with the AUM (OHM/OM) symbol. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The symbol is raised on the surface.
The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.
We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.
We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration, see the pictures. A few of them are pictured in their finished state.
We hebben dezelfde Hamsa, ook beschikbaar als (sieraden) tray met verhoogde rand.
De pootjes zijn 40 mm lang en je brengt ze vanaf de onderzijde van de bodemplaat door de openingen aan. Je kunt de pootjes eventueel aan de onderzijde met een druppeltje lijm of (UV) epoxy vastzetten, zodat het een stevig geheel wordt (Tip: hang de houder op zijn kop, dan hangen de pootjes tijdens het drogen van de lijm recht naar beneden).
Er is een aparte mal met langere pootjes verkrijgbaar, lang genoeg voor 8 onderzetters.