Matte Mallen

Two silicone molds for:

• a set of two Tube coasters. The coasters are 12.5 x 12.5 cm (5" x 5") wide and 1 cm thick.
• a Tube tray. The tray is 12.5 x 25 cm (5" x 10") wide and 1 cm (2/5") thick.

Both the coasters and the tray have a flat bottom and the top consists of 5 adjacent tubes. 

!! ATTENTION: these mold don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in shiny (glossy) coasters and tray, they will have a matte finish, as shown in the pictures.

The molds are also available separately.

Silicone mold for an Art panel, titled Squares and Circles. The panel is 20 x 20 cm (8"x 8") wide, 18 mm (7/10") thick and all elements in the panel have different heights.

Add an artistic touch to your interior with our 'Squares and Circles' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The elements in the panel form a symmetrical pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Squares and Circles' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a medium sized matte Tree of Life symbol. This Tree of Life is 20 cm (8") wide and 15 mm (3/5") thick.

The iconic Tree of Life symbolizes growth, balance and harmony. Use your artistic talents to create a beautiful and unique symbol, embrace your inner tree hugger and add a touch of whimsy to every room.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Tree of Life, it will have a matte finish, as shown in some of the pictures.

We also have (a larger) Tree of Life mold available which has a glossy finish, perfect to use with epoxy resin.

Silicone mold for a large Christmas Bauble Trinket Dish. The Trinket Dish is 21.5 x 22.5 cm (8 1/2" x 8 9/10") wide and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").

Looking for a festive way to stash your holiday treats? Look no further and create your own decorative Christmas dish with this mold! It will be perfect for holding your favorite candies and sweets (warning: may cause an increase in Christmas spirit!).

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) trinket dish, it will have a matte finish.

Silicone mold for a matte Art panel, titled Feathers. The panel is 20 x 20 cm (8"x 8") wide and 20 mm (4/5") thick.

Add an artistic touch to your interior with our 'Feathers' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The feathers form a continuous pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the matte 'Feathers' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a large standing Nosy Rudolph. Rudolph is about 22.5 cm (8 9/10") wide and high and 2.5 cm (1") thick, excluding the raised eyes and nose.

Meet Nosy Rudolph, the quirky reindeer on a mission to find Santa! The handcrafted Christmas decoration that you can create with this mold, adds a playful touch to any table, dresser or windowsill. Get creative and make it a unique centerpiece for your holiday decoration!

!! ATTENTION: besides the eyes and nose, Rudolph doesn't have a glossy finish. Use the mold therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Rudolph, it will have a matte finish. However, you can for instance use resin first for the eyes and nose, making them pop out on your finished creation.

Silicone mold for 4 square coasters with a rough tumbled marble look and feel. The coasters are 10 x 10 cm (4" x 4") wide and 1 cm (2/5") thick.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish.

We also have two molds available for a square tumbled marble tray (20 x 20 cm and 30 x 30 cm), see one of the pictures (for illustrative purposes, this item is only for the tumbled marble coasters mold).

Two silicone molds for:

• 4 square coasters with a rough tumbled marble look and feel. The coasters are 10 x 10 cm (4" x 4") wide and 1 cm (2/5") thick.
• a square tray with a rough tumbled marble look and feel. The tray is 20 x 20 cm (8" x 8") wide and 1 cm (2/5") thick.

!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters and tray, they will have a matte finish.

The molds are also available separately.

Silicone mold for a Tube tray. The tray is 12.5 x 25 cm (5" x 10") wide and 1 cm (2/5") thick. The tray has a flat bottom and the top consists of 5 adjacent tubes.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish, as shown in the pictures.

We also have a mold available for 2 matching Tube coasters, see one of the pictures (for illustrative purposes, this item is only for the Tube tray mold). Both molds are also available as a set, for a special setprice.

Silicone mold for a large standing Gingerbread Man. The figure is 22.5 cm (8 9/10") high and 2.5 cm (1") thick, excluding the raised pattern of 2 mm.

Add some festive cheer to your home with a Standing Gingerbread Man! Perfect for adding a touch of Christmas spirit to your table, dresser or windowsill, this jolly little guy will bring a smile to your face. Plus, he doubles as a charming holiday decoration. Be creative, get this mold and make your own now!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Gingerbread man, it will have a matte finish.

Silicone mold for two thick Rocky coasters. The coasters are appr. 12.5 cm (5") wide and 2 cm (4/5") thick. The flat surface at the top is appr. 8 cm (3 1/6") wide.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in one of the pictures.

Silicone mold for a large Trinket dish, shaped as a Halloween Ghost! The tray is 19.5 cm (7 1/2") wide, 22.5 cm (8 9/10") high and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").

Get into the Halloween spirit with this Spooky Trinket Dish! Made by yourself using this silicon mold, the dish will be perfect for storing your Halloween treats or adding a touch of spookiness to your décor. Embrace the spooky spirit all year round!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) trinket dish, it will have a matte finish.

Silicone mold for an Art panel, titled Botanicum. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick. 

Add an artistic touch to your interior with our 'Botanicum' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Botanicum' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Horizon. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick. 

Add an artistic touch to your interior with our 'Horizon' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Horizon' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for two Tube coasters. The coasters are 12.5 x 12.5 cm (5" x 5") wide and 1 cm (2/5") thick. The coasters have a flat bottom and the top consists of 5 adjacent tubes.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in the pictures.

We also have a mold available for a matching Tube tray, see one of the pictures (for illustrative purposes, this item is only for the Tube coasters mold). Both molds are also available as a set, for a special setprice.

Silicone mold for a square tray with a rough tumbled marble look and feel. The tray is 20 x 20 cm (8" x 8") wide and 1 cm (2/5") thick.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish.

We also have a mold available for a 30 x 30 cm (XL) tumbled marble tray and a mold for 4 square tumbled marble coasters, see one of the pictures (for illustrative purposes, this item is only for the 20 x 20 cm tumbled marble tray mold).

Silicone mold for a square XL tray with a rough tumbled marble look and feel. The tray is 30.5 x 30.5 cm (12" x 12") wide and 12.5 mm (1/2") thick.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish.

We also have a mold available for a 20 x 20 cm square tumbled marble tray and a mold for 4 square tumbled marble coasters, see one of the pictures (for illustrative purposes, this item is only for the XL tumbled marble tray mold).