Alle mallen

Silicone mold for a set of four 'Fantasy' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster holder, 4 trays, 2 cakestands and a set of 8 medallions.

Several of these molds are in sets available, for special setprices. 

The Fantasy coaster mold is also in a holographic version available, for spectacular color effects on the surface of your resin coasters!

Silicone mold for a set of four Holographic round coasters of 10 cm (4") wide and 8 mm (1/3") thick.

These coasters are the same as our normal round coasters, but then with a Holographic color effect, which  will transfer to the surface of your resin coasters. We call this specific effect 'Color Burst'!

We also have a mold separately available for a holographic round coaster holder, see one of the pictures (for illustrative purposes, this item is only for the coaster mold). 

Silicone mold for 4 round Geode coasters. The coasters have the same shape as our round Geode trays, but then smaller, they are 12.5 cm (5") wide and 8 mm (1/3") thick. There is also a mold for a matching coaster holder.

This item is only for the coaster mold, but both the coaster and holder mold are as a set available, for a special setprice.

A set with this coaster mold, the holder mold and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the coaster mold).

(Please note that these coasters are not the same as our irregular shaped Geode coasters (item MOSH0054) and they will not fit in the holder for the irregular coasters.)

The Geode coaster mold is also in a holographic version available, for spectacular color effects on the surface of your resin coasters!

Silicone mold for a set of 4 Holographic Fantasy coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters are the same as our other Fantasy coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

here are also molds available for a holographic Fantasy coaster holder and a holographic Fantasy tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

Silicone mold for two square Geode-style coasters with rough sides. The coasters are about 12.5 x 12.5 cm (5" x 5") wide and 12 mm (1/2") thick. The flat surface of each coaster is about 9 x 9 cm (3 1/2" x 3 1/2").

Keep your tables safe from water rings in style with this Rough & Tough Square Coaster duo! Beaten up on the sides, but smooth and shiny on the top, the coasters made with this mold are solid as a rock.

The mold includes two cool Geode-style thick coasters and it's perfect for both Resin and Acrylic resin (Jesmonite, Acrylic One, Jesin and other brands). Don't be fooled by their toughness, these coasters will be sure to brighten up your space!

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for 6 small Christmas Angels with Crystal Wings. Each Angel is 10 cm (4") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 4 Angels of 15 cm (6") tall and one with 2 Angels of 20 cm (8") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Two silicone molds for:

• a set of four square Kintsugi coasters (Kintsugi is the Japanese art of fixing broken pottery). The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Kintsugi coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the supports with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Silicone mold for a set of 4 Hexagon coasters. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick.

This coaster mold is part of our line of Hexagon molds, in which besides this mold are also molds for a matching coaster holder, two hexagon trays, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There are two special prized hexagon sets of 3 molds available with this coaster mold, one set with the holder and the medium sized hexagon tray and one set with the holder and the large hexagon tray.

It is also easy to make Hexagon coasters with a raised edge and an engraved pattern if you combine this mold with one of our Hexagon inlay molds.

The Hexagon coaster mold is also in a holographic version available, for spectacular color effects on the surface of your resin coasters!

Een set van vier siliconen inlegmallen, met een Mandala erin gegraveerd. Elke inlegmal is 2,5 mm dik en 12,5 cm breed en ze passen perfect in onze 15 cm (6") ronde geode tray mal en de 15 cm gewone ronde mal, zie de foto's (ter illustratie, dit item is alleen voor de set van vier inlegmallen).

Silicone mold for a set of 4 Cup Coasters. The coasters are 12.5 cm (5") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick.

There are also molds available for a 25 cm (10") large Cup tray and a 35.5 cm (14") XL Cup tray, see one of the pictures (for illustrative purposes, this item is only for the cup coasters mold).

This cup coasters mold and the large cup tray mold are also available as a set, at a special setprice.

Siliocone mold for a round disc of 25 cm (10") and 1 cm (2/5") thick. For example, the mold can be used together with our larger inlay molds, see some of the pictures (for illustrative purposes, this item is only for the round disc mold).

There are also molds for a 15 cm (6") and a 35.5 cm (14") disc available.

Silicone mold for two Geode coasters with Rough sides. The coasters are about 14 x 11.5 cm (5 1/2" x 4 1/2") wide and 12 mm (1/2") thick. 

Our Rough & Tough Geode Coaster mold isn’t for the faint of heart! The coasters are thick, tough and designed to look and feel like genuine rough-cut Geode slices. Featuring 12 mm (1/2") of thickness, these rock star coasters will protect your table from water rings all night long. Show off your rough side with these striking coasters!

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Two silicone molds for in total 12 Holographic Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

Both molds are also available separately. And we have the molds also in a non-holographic version available.

Silicone mold for a set of four Holographic square coasters of 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

These coasters are the same as our normal square coasters, but then with a Holographic color effect, which  will transfer to the surface of your resin coasters. We call this specific effect 'Color Burst'!

The holographic coasters will fit in the holder for the normal square coasters, which is separately available.