Kerst en Winter

Christmas Baubles, you can never have enough of them when you want to decorate your house to get into the Christmas spirit.

With this silicone mold for 6 large Christmas Baubles it will be a breeze to give a personalized touch to your Christmas decoration! Each bauble is 10 cm (4") wide and 6 mm (1/4") thick.

We have 4 more Christmas Bauble molds of the same size available, with holographic color effects, with raised decorative patterns, with engraved Gnomes (8 mm thick) and with decorative druzy crystal patterns.

Silicone mold for 6 small Christmas Angels with Crystal Wings. Each Angel is 10 cm (4") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 4 Angels of 15 cm (6") tall and one with 2 Angels of 20 cm (8") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Two silicone molds for in total 12 Holographic Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

Both molds are also available separately. And we have the molds also in a non-holographic version available.

Silicone mold for 9 Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. They are 6 mm (1/4") thick.

The same ornaments are also available with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Look, who is peeping through the window? That's Rudolph, the red nose Reindeer! He probably wants to join in the fun Christmas festivities.

Deep pour silicone mold with Rudolph, the Red nose Reindeer. The size of the block mold is 15 x 15 cm (6" x 6") and it's 2 cm (4/5") thick. Rudolph is watching on top of the block, he is 3 mm (1/9") thick.

The mold is thick enough to add for instance a string of Christmas lights in the resin, which will give a beuatiful look to Rudolph!

Silicone mold for 9 Holographic Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. The ornaments are 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for 6 small Christmas Angels. Each Angel is 10 cm (4") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 20 cm (8"). Some of them are also available in a Druzy crystal or Holographic version.

Silicone mold for 6 Christmas Star ornaments, with holes for a ribbon or cord. Each star is 10 cm (4") wide and high and they are 6 mm (1/4") thick.

The same stars are also available in a mold with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Silicone mold for a set of 6 large Holographic Christmas Baubles. Each bauble is 10 cm (4") wide, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas baubles.

We have 4 more Christmas Bauble molds of the same size available, with druzy crystal patterns, with raised decorative patterns, with engraved Gnomes (8 mm thick) and with a smooth surface.

Silicone mold for 4 medium size Christmas Angels with Crystal Wings. Each Angel is 15 cm (6") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 6 Angels of 10 cm (4") tall and one with 2 Angels of 20 cm (8") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Silicone mold for a set of 6 large Decorative Christmas Baubles. Each bauble is 10 cm (4") wide, 6 mm (1/4") thick and they all have a raised decorative pattern of 0.75 mm thickness.

We have 4 more Christmas Bauble molds of the same size available, with holographic color effects, with druzy crystal patterns, with engraved Gnomes (8 mm thick) and with a smooth surface.

Silicone mold for 12 extra small Christmas Angels. The angels are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 20 cm (8"). Some of them are also available in a Druzy crystal version.

Two silicone molds for in total 12 Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

Both molds are also available separately. And we have the molds also in a holographic version available.

Silicone mold for 6 small engraved Gingerbread men. The Gingerbread men are 10 cm (4") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 7.5 cm (3") and 20 cm (8") tall.

The video of Claire's Crafty Corner shows how to do the icing lines in the most realistic way.

Silicone mold for a set of 6 large Christmas Baubles with Decorative Druzy Crystal patterns. Each bauble is 10 cm (4") wide and 6 mm (1/4") thick.

We have 4 more Christmas Bauble molds of the same size available, with holographic color effects, with raised decorative patterns, with engraved Gnomes (8 mm thick) and with a smooth surface.

Silicone mold for 12 cute engraved Christmas ornaments. The ornaments are between 6 cm and 10.5 cm (2 1/3" and 4") high and they are 6 mm (1/4") thick. Each ornament has a hole for a ribbon or cord. 

Silicone mold for 6 small Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 11 cm (4 1/3") high and 6 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 8 cm (3 1/6") to 30 cm (12").

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 7 cm (2 3/4") and 9.5 cm (3 3/4") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a non-holographic version available.

Silicone mold for 6 Holographic Christmas Star ornaments, with holes for a ribbon or cord. Each star is 10 cm (4") wide and high, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for 10 engraved Gingerbread ornaments. The ornaments are between 7.5 (3") and 8 cm (3 1/6") tall and they are 6 mm (1/4") thick.

There are nine different ornaments, the Gnome ornament is double and the candy stick is mirrored.

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a holographic version available.

Four silicone inlay molds featuring an engraved Cute Gnome. The molds are 9.2 cm (3 2/3") wide and appr. 3 mm (1/9") thick.

These inlay molds are a perfect match for our round coaster mold, or even for our mold for a Coffee and Cookies serving tray, as shown in one of the pictures (artist: Petra van Vlaanderen), resulting in a creation with a raised edge and a beautiful design.

We also have other round inlay molds available with different patterns.

Silicone mold for a Holographic Tealight Candle Holder with Rudolph the Red Nosed Reindeer. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. Rudolph is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.