Medaillons

Siliconen mal voor een set van acht decoratieve (servetring) medaillons, in de vorm van Geode Rocks. Elke medaillon is 55 mm breed en 8 mm dik.

Deze medaillon mal kan samen met onze mal voor de acht (servet) ringen worden gebruikt, die speciaal ontworpen is om de basis te vormen voor deze medaillons. Samen vormen ze een unieke servetring.

(De mal voor de ringen is apart verkrijgbaar, de foto die zowel de medaillon mal als de ring mal laat zien is alleen ter illustratie. In dit artikel wordt alleen de medaillon mal geleverd.)

De Geode Rocks medaillon mal is ook in een holografische versie verkrijgbaar, voor spectaculaire kleureffecten op het oppervlak van je epoxy medaillons!

Silicone mold for a set of eight Holographic (napkin ring) medallions, in the shape of Geode Rocks. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.

These medallions are the same as our normal Geode medallions, but then with a Holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a set of eight round (napkin ring) medallions. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).

Silicone mold for a set of eight Holographic Fantasy (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick. 

These medallions are the same as our normal Fantasy medallions, but then with a holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a set of eight decorative (napkin ring) 'Fantasy' medallions. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

The medallion mold is part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 cake stands and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).

We made several of these molds in sets available, for special setprices.

This mold is especially designed to use together with our mold for eight Hexagon medallions, see one of the pictures (for illustrative purposes, this item is only for the ring mold).

There are also hexagon shaped molds available for two trays, a set of four coasters and a matching coaster holder.

Silicone mold for a set of eight decorative Scallop medallions. Each medallion is 5.5 cm (2 1/6") x  4.8 cm (1 9/10") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray and two larger trays, see one of the pictures (for illustrative purposes, this item is only for the medallions mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Siliconen mal voor een set van acht decoratieve (servetring) medaillons, met een sneeuwvlok er in gegraveerd. Elke medaillon is 55 mm breed en 8 mm dik.

Deze medaillon mal kan samen met onze mal voor de acht (servet) ringen worden gebruikt, die speciaal ontworpen is om de basis te vormen voor deze medaillons. Samen vormen ze een unieke servetring.

(De mal voor de ringen is apart verkrijgbaar, de foto die zowel de medaillon mal als de ring mal laat zien is alleen ter illustratie. In dit artikel wordt alleen de medaillon mal geleverd.)

Silicone mold for a set of eight decorative (napkin ring) medallions, shaped as a Geranium flower. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).

Silicone mold for a set of eight Holographic Hexagon (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick. 

These medallions are the same as our normal hexagon medallions, but then with a Holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the Hexagon (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Siliconen mal voor een set van acht decoratieve (servetring) medaillons, met een Zonnebloem er in gegraveerd. Elke medaillon is 55 mm breed en 8 mm dik.

Deze medaillon mal kan samen met onze mal voor de acht (servet) ringen worden gebruikt, die speciaal ontworpen is om de basis te vormen voor deze medaillons. Samen vormen ze een unieke servetring.

(De mal voor de ringen is apart verkrijgbaar, de foto die zowel de medaillon mal als de ring mal laat zien is alleen ter illustratie. In dit artikel wordt alleen de medaillon mal geleverd.)

Silicone mold for a set of eight Hexagon (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the Hexagon (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring. 

This medallion mold is part of our line of Hexagon molds, in which besides this mold are also two hexagon trays, a set of four hexagon coasters and a matching coaster holder, as shown in one of the pictures (for illustrative purposes, this item is only for the hexagon medallions mold).

The hexagon medallion mold is also in a holographic version available, for spectacular color effects on the surface of your resin medallions!

Silicone mold for a set of eight decorative (napkin ring) medallions, engraved with the Peacock Mandala. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring. 

This medallion mold is part of our 'Peacock Mandala' design line, in which besides this mold are also three cake stand molds (with a center hole), a set of four coasters and a coaster holder.

Silicone mold for a set of eight decorative Easter medallions, engraved with Little Thumper and decorative eggs. Each medallion is 5.5 cm (2 1/6") tall, 4.4 cm (1 3/4") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on these medallions, he also appears on molds for a set of 4 coasters, a matching coaster holder, an egg holder, a large tray, a flower arranger and a tealight candle holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a set of eight (napkin ring) medallions, with a decorative 'Merry Christmas' engraving. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

We have several other molds available with the same 'Merry Christmas' engraving, see one of the pictures (for illustrative purposes, this item is only for the medallion mold) and these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a set of eight decorative (napkin ring) medallions, shaped as a Daisy flower. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).

Silicone mold for 26 letter medallions. The medallions are flower shaped, they have a decorative engraving and each letter has an engraved border, which makes it pop out beautifully. The medallions are 5 cm (2") wide, 6 mm (1/4") thick and you can for instance make personalized phone grips, fridge magnets, napkin medallions, keyring tags and holiday decorations with them.

As a bonus we added the same engraved flower in the center of the mold, it is about 11 cm (4 1/3") large.

There is also a similar mold available that is holographic and has keyring holes in the medallions. 

Silicone mold for a set of eight decorative (napkin ring) medallions, with our Magical shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a set of eight medallions, in the shape of a pair of Christmas Bells. There are also Christmas bells engraved into them. Each medallion is 5.5 cm (2 1/6") wide, 4.7 cm (1 4/5") high and 8 mm (about 1/3") thick.

Silicone mold for a set of eight Holographic Magical (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick. 

These medallions are the same as our normal Magical medallions, but then with a holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a set of eight decorative (napkin ring) medallions, with our Oriental  shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures for some of them (for illustrative purposes, this item is only for the medallion mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.