Alle mallen

Two silicone molds for a large 2-tier cake stand, engraved with the Peacock Mandala. The cake stands are 24 cm (9 2/5") and 30 cm (11 4/5") wide and 8 mm (1/3") thick. The centers have a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The molds are part of our 'Peacock Mandala' design line, in which besides these molds are also a smaller cake stand (to make a 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

Silicone mold for a medium sized cake stand, engraved with the Peacock Mandala. The cake stand is 24 cm (9 2/5") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The medium sized cake stand mold is part of our 'Peacock Mandala' design line, in which besides this mold are also a smaller and a larger cake stand (to make a 2-tier or 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

This mold is also available in several sets, for a special setprice. 

Silicone mold for a large Cobble Tray. The tray is 25 cm (10") wide, 25 cm (10") high and 8 mm thick.

Bring a soft, organic feel to your resin creations with this Large Cobble Tray mold. Its flowing, asymmetrical shape gives every finished piece a modern and natural appearance. The generous smooth surface and polished edges leaves plenty of room for colour effects, botanical inclusions, metallic accents or minimalist designs. Perfect as a serving tray, decorative centrepiece or statement piece for the home.

Silicone mold for 3 Door Hangers, each featuring a unique Halloween design (No. 2) The door hangers are 8 cm (3 1/8") wide, 21 cm (8 1/4") tall and 8 mm (1/3") thick.

Bring some playful Halloween spirit to every door with this mold for three engraved door hangers. Each design is different, featuring a witch’s hat, a cheerful skeleton or a pumpkin bucket filled with sweet treats. The detailed engravings are perfect for experimenting with bold colours, glitter, glow-in-the-dark pigments and spooky layered effects. Use them for Halloween décor, children’s rooms or fun handmade gifts.

We also have another Halloween door hanger mold available, featuring three different designs.

Silicone mold for a small Lavatera Flower Tray. The tray is 17.5 cm (6 9/10") wide, 16 cm (6 3/10") high and 8 mm (1/3") thick.

Inspired by the graceful shape of a Lavatera flower, this small tray brings a delicate floral touch to your creations. The subtle engraved details add depth and definition to the petals without overpowering your design. Experiment with transparent colours, soft gradients, glitter or real dried flowers to create your own unique decorative tray.

This mold is part of our Lavatera Flower Collection, which includes trays in three different sizes and a mold for four Lavatera coasters. The tray molds are also available in several money-saving sets.

Silicone mold for 3 Door Hangers, each engraved with a unique Nutcracker Doll. The Door hangers are 8 cm (3 1/8") wide, 21 cm (8 1/4") tall and 8 mm (1/3") thick.

Bring festive charm to every door with this mold for three Christmas door hangers. Each hanger features its own adorable Nutcracker design, perfect for creating decorative Christmas pieces, from elegant colour combinations to bold glitter-filled creations.

Make them for your own festive décor or turn them into unique handmade gifts. Three designs, three times the Christmas fun!

Silicone mold for an Art panel, titled Parallel Tubes. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 19 mm (3/4") thick. 

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We also have another, similar, Tubes mold avalable, but then with diagonal tubes. both molds are also available as a set, for a special setprice.

Set of 2 silicone molds for Art panels, titled Dunes. Both panels are 20 x 20 cm (8"x 8") wide and they can maximum be 18 mm (7/10") thick. 

Make a statement! This set of Dunes I and Dunes II molds offers a seamless, serene flowing sand dunes pattern that can be spread across your entire wall. Ideal for those looking to create a large, impactful wall decoration. The matte finish makes them perfect for Jesmonite and similar products, allowing you to capture both the texture and natural beauty of sand dunes perfectly.

Both molds are also available separately.

!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in shiny (glossy) panels, they will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a holder for Oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide, 8 mm (1/3") thick and it can hold 4 of our oval coasters.

You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the supports, because then they will no longer fit through the slots.

There are also molds for matching coasters and for two oval trays available, see one of the pictures (for illustrative purposes, this item is only for the oval holder mold).

We have the molds also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

There is also a mold available for the same size oval coaster holder, but then engraved with thin 'Graceful lines'.

Silicone mold for a large Flower Arranger. This Flower Arranger is 27.5 cm (11") wide, 8 mm (1/3") thick and it has a whopping 21 holes in 3 different sizes.

Fun times and flower power await with the large Flower Arranger that you can create with this mold! Your Flower Arranger will hold up at least 21 stems perfectly, making it a breeze - and a beautiful sight - to arrange your favourite flowers into show-stopping bouquets. So go ahead, get creative and let your inner floral designer shine!

If you only have small vases, don't worry, we also have two molds for smaller Flower Arrangers in our collection, one with 5 holes and one with 9 holes.

Two silicone molds for:

• a set of four square coasters with an engraved Ocean theme. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Ocean coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Silicone mold for a square tray with an engraved Ocean theme. The tray is 25 x 25 cm (10" x 10") and 8 mm (1/3") thick.

There are also molds available for matching coasters and a coaster holder, see one of the pictures (for illustration purposes, this item is only for the tray mold).

The 3 molds are also in two different sets available (coasters with holder, coasters with holder and tray), for special setprices.

Silicone mold for a Holographic holder for 4 (holographic) Magical coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Magical coasters, see one of the pictures (for illustrative purposes, this item is only for the holder mold). Both holographic molds are also as a set of 2 molds available, for a special setprice.

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This mold is also available in a normal version, without the holographic color effect.

Silicone mold for a holder for the Mandala Dahlia coasters.

The baseplate of the holder is engraved with the 'Mandala Dahlia' and especially designed for the coaster set with the same engraving, see the pictures (for illustrative purposes, this item is only for the holder mold).

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The holder mold is part of our 'Mandala Dahlia' design line, in which besides this mold are also a large tray, a set of four coasters and a set of 8 medallions, as shown in some of the pictures (for illustrative purposes, this item is only for the holder mold).

The holder mold and coaster mold are also as a set available, for a special setprice.

Silicone mold for a Baby Cloud. The cloud is 30.5 cm (12") wide, 23 cm (9") high and 8 mm (1/3") thick.

Celebrate a precious new arrival with this charming Baby Cloud mold. The cloud features the engraved words “Hello Little One”, delicate stars and clouds, plus space to add a baby’s name or other personal details and messages. Along the bottom are several hanging points, specially designed for use with our matching Baby Cloud Ornaments mold. Combine the cloud with hearts, stars, raindrops and other sweet shapes to create a completely personalised nursery decoration or baby keepsake.

Silicone mold for 15 ornaments, specially designed to complement our Baby Cloud mold. The ornaments come in different sizes, and several feature two holes, allowing you to link multiple ornaments together. Each ornament is 6 mm (1/4") thick.

Create a beautiful personalised baby keepsake with this mold for 15 matching hanging ornaments. The collection includes hearts, stars, clouds, raindrops and other sweet shapes, with plenty of room for names, birth details, colours and decorative effects. Each ornament is designed to hang perfectly beneath our Baby Cloud. Use them individually or combine several shapes to create a unique decoration for a nursery, baby shower or newborn gift.

Set of two silicone molds for a total of six Door Hangers. Three with the hook openings to the left and three with the hook openings to the right. Each door hanger is 8 cm (3 1/8") wide, 21 cm (8 1/4") tall and 8 mm (1/3") thick.

With six door hangers in total, you have maximum flexibility for different designs, colour themes and decorative projects. Use them for seasonal décor, personalised signs or coordinated handmade gift sets.

The molds are also available separately.

Set of two silicone molds for a medium size and a large Lavatera Flower tray. The medium size tray is 22.5 cm (8 9/10") wide and 20.5 cm (8") high, the large tray is 27.5 cm (10 4/5") wide and 25 cm (10") high. Both trays are 8 mm (1/3") thick.

Create larger floral displays with this set containing the medium and large Lavatera tray molds. Their matching shapes and delicate petal details make it easy to produce a beautifully coordinated collection. Use each tray separately or combine both sizes to create an impressive two-tier cake stand. Perfect for statement pieces, special occasions and resin creations that deserve a little extra flower power.

These two molds are part of our Lavatera Flower Collection, which includes three different tray sizes, a mold for four Lavatera coasters and several carefully selected mold sets.

Silicone mold for an XL tray with the Lily Mandala engraved into it. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

The tray mold is part of our Lily Mandala line, which also includes a set of 4 coasters, a coaster holder, a large Lily tray and a set of 8 medallions, as shown in one of the pictures (for illustrative purposes, this item is only for the XL Mandala tray mold).

Silicone mold for a Holographic holder for 4 (holographic) Oriental coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Oriental coasters, see one of the pictures (for illustrative purposes, this item is only for the holder mold). Both holographic molds are also as a set of 2 molds available, at a special setprice.

The legs of the holder are 44 mm (1 3/4") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This mold is also available in a normal version, without the holographic color effect.

Silicone mold for an Art panel, titled Dunes II. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick. 

Bring nature into your home with this panel mold! As our other Dunes panel mold (Dunes I), this mold too features a similar serene flowing sand dunes pattern. You can use the mold as a standalone piece, perfect for creating unique wall decor. The matte finish ensures a perfect texture when used with Jesmonite and similar products. 

However, did you know you can cover an entire wall by combining Dunes I and Dunes II? Pair this mold with our Dunes I mold (available separately), to create a continuous pattern across your wall, as you can see in some of the pictures. Both molds are also available as a set, for a special setprice.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Three silicone molds for:

• a set of four Slate coasters. The coasters are appr. 11 x 13 cm (4 1/3"x 5 1/10") and 6 mm (1/4") thick.
• a holder for the Slate coasters. 
• a large oval Slate tray. The tray is 30 cm x 22.5 cm (12" x 8 4/5") large and 8 mm (1/3") thick.

The edges of the coasters, holder and tray are coarsened, for that specific slate look and feel.

The molds have a smooth surface, the 'crushed ice' effect that is shown in one of the pictures, is made with some of our inlay molds, which are available separately.