Inlegmallen

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

And this 'Mikado' pattern is also available for square and hexagon coasters, see one of the pictures (for illustrative purposes, this item is only for the square inlay molds).

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #4).

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #1).

Set of 4 silicone Holographic inlay molds, in the shape of a heart. Each heart is 13.3 cm (5 1/4") wide, 11.8 cm (4 2/3") tall and appr. 5 mm (1/5") thick.

These inlay molds are especially designed for our heart shaped coaster mold, which is available separately. Because the inlay molds are appr. 5 mm thick, the result will be a heart shaped coaster with a raised edge.

The molds have a holographic color effect, which  will transfer to the surface of your resin hearts. Please be aware that when you pour a finishing (top) layer over the holographic piece, the holographic effect will be gone! We therefore advise not to use a top coat.

Four silicone inlay molds for Square coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") square coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other square inlay molds available with a different pattern, see one of the pictures.

Four silicone inlay molds for Square coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") square coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other square inlay molds available with a different pattern, see one of the pictures. 

And this 'Mikado' pattern is also available for round and hexagon coasters, see one of the pictures (for illustrative purposes, this item is only for the square inlay molds).

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #3).

Set of 5 silicone inlay molds with the Crushed Ice pattern. The 'Island' mold is 15.5 x 21 cm (6" x 8 1/4") at the widest parts and the round inlay molds are 8 cm (3 1/6").

All molds are about 4 mm (1/6") thick and the round molds will fit in (almost) any coaster mold.

Silicone square inlay mold with a Holographic decorative lead glass 'Daisy bud' pattern. The mold is 18 x 18 cm (7" x 7") wide and 5 mm (1/5") thick. The 'Daisy bud' pattern is 0.75 mm deep.

This inlay mold will make a great combination together with our 20 x 20 cm (8" x 8") large tray molds of 1 cm (2/5") and 2 cm (4/5") thickness. Using the two molds together will create a tray with a raised edge of 5 mm (1/5").

There is also a larger normal version of this inaly mold available, without the holographic color effect. And we also have 8 mm (1/3") tray molds with this 'Daisy bud' pattern available, in a normal and in a holographic version.

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

And this 'Mikado' pattern is also available for round and square coasters, see one of the pictures (for illustrative purposes, this item is only for the hexagon inlay molds).

Silicone square inlay mold with a decorative lead glass 'Daisy bud' pattern. The mold is 23 x 23 cm (9" x 9") wide and 5 mm (1/5") thick. The 'Daisy bud' pattern is 0.75 mm deep.

This inlay mold will make a great combination together with our 25 x 25 cm (10" x 10") large tray molds of 1 cm (2/5") and 2 cm (4/5") thickness, as shown in one of the pictures (resin artist: Resin Kreativwelt). Using the two molds together will create a tray with a raised edge of 5 mm (1/5").

There is also a smaller holographic version of this inaly mold available and we also have 8 mm (1/3") tray molds with this 'Daisy bud' pattern available, in a normal and in a holographic version.

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.