Geode

Silicone mold for a large Amethyst. The size of the Amethyst is about 11 cm (4 1/3") x 10 cm (4") and maximum about 3.5 cm (1 1/3") high.

Silicone mold for a large Cascade Geode tray. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a smaller tray mold available with the same cascade design. 

Silicone mold for a set of eight Holographic (napkin ring) medallions, in the shape of Geode Rocks. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.

These medallions are the same as our normal Geode medallions, but then with a Holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a Holographic Geode winebutler, for two glasses. The winebutler is 8 mm (1/3") thick.

The shape of the winebutler is the same as our normal Geode winebutler mold, but then with a holographic color effect, which  will transfer to the surface of your resin winebutler.

Silicone mold for a small Cascade Geode tray. The tray is about 18 cm (7") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a larger tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the small tray mold).

Set of 2 silicone molds for 4 Round Geode coasters and a matching holder. The coasters have the same shape as our round Geode trays, but then smaller, they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters.

The molds are also available seperately.

A set with these two molds and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the coaster and holder mold).

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder!

Set of 3 silicone molds for 4 Round Geode coasters with a matching holder and a large round Geode Tray. The coasters have the same shape as the tray and they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters. The Geode tray is 25 cm (10") wide and 10 mm (2/5") thick. 

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The molds are also separately available.

Set van twee siliconen mallen voor vier Geode onderzetters met bijpassende houder. De onderzetters zijn ongeveer 12,5 cm breed en ze zijn 10 mm dik. De mallen zijn ook apart verkrijgbaar.

Siliconen mal voor een houder voor vier onderzetters. Er passen vier onderzetters in die maximaal 6 mm dik zijn en de houder is specifiek voor onze Leisteen onderzetters ontworpen. De rand van de houder is verruwd, zodat het de specifieke uitstraling van leisteen heeft.

De houder mal en de onderzetter mal zijn ook als een set verkrijgbaar, voor een speciale setprijs.

We hebben ook mallen voor Druzy onderzetter inlays en voor een grote tray van 30 cm, zie de foto's (ter illustratie, dit item is alleen voor de onderzetter mal).

Set of 2 Holographic silicone molds for 4 Geode coasters and a matching holder. The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for these coasters and both molds have a holographic color effect, which  will transfer to the surface of your resin coasters.

The molds are also available separately.

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Geode tray with Rough sides. The tray is about 22 x 26 cm (8 2/3" x 10 1/4") wide and 12 mm (1/2") thick.

Bring a touch of the extraordinary into your home with the Rough & Tough Geode Tray. Made to look like a Geode slice, this tray is sure to make a statement with its rough sides and sturdy design. The thick mold gives you many technique options for a stunning tray, created by you!

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for a set of four Geode coasters with the Crushed Ice effect. The coasters have a raised edge and are about 11 cm (4 1/3") wide and 8 mm (1/3") thick. 

There are also molds available for a large and extra large Geode tray that have the same Crushed Ice effect and raised edge, see one of the pictures for an example (for illustrative purposes, this item is only for the coaster mold).

Silicone mold for a holder for 4 round Geode coasters, that are maximum 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for our Round Geode Coasters.

This item is only for the coaster holder mold, but both the holder and matching coaster mold are as a set available, for a special setprice.

A set with this holder mold, the coaster mold and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the holder mold).

You insert the legs from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The Geode coaster holder mold is also in a holographic version available, for spectacular color effects on the surface of your resin coasters!

Silicone mold for a large Rectangular Geode-style tray with rough sides. The tray is about 18 x 31 cm (7" x 12") wide and 12 mm (1/2") thick.

This mold for a Rough & Tough Rectangular tray is designed for the creative mind that likes it a little rough on the sides and smooth on the surface! The mold can be used with Resin and Acrylic Resin (Jesmonite, Acrylic One, Jesin and other brands). Made to look like a real stone tray, it's a beautiful mix of stylish and strong - perfect for all of your creativity and decoration needs. 

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for two thick Rocky coasters. The coasters are appr. 12.5 cm (5") wide and 2 cm (4/5") thick. The flat surface at the top is appr. 8 cm (3 1/6") wide.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in one of the pictures.

Silicone mold for a small Holographic Geode tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We have the same holographic tray also in a larger 28 cm (11") version available.