Kerst en Winter

Silicone mold for 4 medium size Christmas Angels. Each Angel is 15 cm (6") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 20 cm (8"). Some of them are also available in a Druzy crystal or Holographic version.

Silicone mold for 6 small Holographic Christmas Angels. Each Angel is 10 cm (4") tall, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas angels.

We also have a mold available for 4 Holographic Christmas Angels of 15 cm (6") each, see one of the pictures (for illustrative purposes, this item is only for the mold with 6 Christmas Angels).

Both molds are also available in a version without the holographic color effect and  in a version with druzy crystal Angel wings.

Silicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Silicone mold for 15 extra extra small Christmas Angels. The angels are 5 cm (2") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 7.5 cm (3") to 20 cm (8"). Some of them are also available in a Druzy crystal version.

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a non-holographic version available.

Silicone mold for 12 extra small Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 8 cm (3 1/6") high and 6 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 11 cm (4 1/3") to 30 cm (12").

Silicone mold for 2 large Christmas Angels with Crystal Wings. Each Angel is 20 cm (8") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 6 Angels of 10 cm (4") tall and one with 4 Angels of 15 cm (6") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Silicone mold for a large holographic Christmas Bell + 6 small holographic Christmas Bells. The large Bell is 24.5 cm (9 2/3") wide and 25 cm (10") high. It also has a hole of 8 mm (1/3") at the top, to put a ribbon or cord through it. The Bell consists of two layers, a base layer of 8 mm (1/3") thick and on top of which a wireframe pattern of 0.75 mm thick is applied. The pattern will be raised on the surface of your beautiful creation.

The 6 small Christmas Bells vary in size from 5 cm (2") to about 8 cm (3"). They are 6 mm (1/4") thick and they have the pattern engraved in them. These bells also have holes for a hanging cord.

All bells have a holographic color effect, that will transfer to the surface of your resin Christmas bells.

We also have the same mold available without the holographic color effect.

Silicone mold for a Tealight Candle Holder with a Druzy crystal Star. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Silicone mold for a set of four round coasters with a decorative 'Merry Christmas' engraving. The coasters are 10 cm ( 4") wide and 8 mm (1/3") thick.

There is also a mold available for a matching holder and both molds are also as a set available.

We also have a set of 3 molds available, with the coaster mold, the holder mold and a 28 cm (11") tray mold, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Silicone mold for a set of 6 large Christmas Baubles with engraved Gnomes. Each bauble is 10 cm (4") wide and 8 mm (1/3") thick. There are three different patterns in the mold, two of each.

We have 4 more Christmas Bauble molds of the same size available (which are 6 mm thick), with holographic color effects, with druzy crystal patterns, with raised decorative patterns and with a smooth surface.

Silicone mold for a Christmas Trinket Dish, shaped as a friendly Gnome. The trinket dish is 25 cm (10") high, 13.5 cm (5 1/4") wide and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").

Add a touch of festive cheer to your home with a playful Gnome Trinket Dish. Perfect for holding small treasures or holiday treats, it brings a whimsical spirit to your Christmas decorations.

!! ATTENTION: only the Gnome itself has a smooth glossy finish (hat, beard, nose, hands and feet), the remaining part of the trinket dish has a matte finish. Use the mold therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a completely glossy trinket dish, but you can use Resin for the glossy parts to create a  sparkling Gnome.

Silicone mold for a Christmas Tray, featuring a friendly Gnome. The Gnome is 30 cm (12") high, 15 cm (6") wide and 8 mm (1/4") thick.

We also have 4 other Gnome (ornament) molds available, varying in size from 8 cm (3 1/6") to 22.5 cm (8 4/5").

Silicone mold for a large Christmas Bell + 6 small Christmas Bells. The large Bell is 24.5 cm (9 2/3") wide and 25 cm (10") high. It also has a hole of 8 mm (1/3") at the top, to put a ribbon or cord through it. The Bell consists of two layers, a base layer of 8 mm (1/3") thick and on top of which a wireframe pattern of 0.75 mm thick is applied. The pattern will be raised on the surface of your beautiful creation.

The 6 small Christmas Bells vary in size from 5 cm (2") to about 8 cm (3"). They are 6 mm (1/4") thick and they have the pattern engraved in them. These bells also have holes for a hanging cord.

The same mold is also available in a holographic version. The holographic color effect will transfer to the surface of your resin Christmas bells.

Siliconen mal voor een set van acht decoratieve (servetring) medaillons, met een sneeuwvlok er in gegraveerd. Elke medaillon is 55 mm breed en 8 mm dik.

Deze medaillon mal kan samen met onze mal voor de acht (servet) ringen worden gebruikt, die speciaal ontworpen is om de basis te vormen voor deze medaillons. Samen vormen ze een unieke servetring.

(De mal voor de ringen is apart verkrijgbaar, de foto die zowel de medaillon mal als de ring mal laat zien is alleen ter illustratie. In dit artikel wordt alleen de medaillon mal geleverd.)

Silicone mold for 9 extra small Christmas Ornaments with a Gingerbread House. Each house is 7.5 cm (3") high and 6 mm (1/4") thick.

We also have 4 other molds with the same Gingerbread House available, varying in size from 10 cm (4") to 25 cm (10").

Silicone mold for a large standing Nosy Rudolph. Rudolph is about 22.5 cm (8 9/10") wide and high and 2.5 cm (1") thick, excluding the raised eyes and nose.

Meet Nosy Rudolph, the quirky reindeer on a mission to find Santa! The handcrafted Christmas decoration that you can create with this mold, adds a playful touch to any table, dresser or windowsill. Get creative and make it a unique centerpiece for your holiday decoration!

!! ATTENTION: besides the eyes and nose, Rudolph doesn't have a glossy finish. Use the mold therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Rudolph, it will have a matte finish. However, you can for instance use resin first for the eyes and nose, making them pop out on your finished creation.

Three silicone molds for Druzy Crystal Christmas ornaments, one with a Christmas tree, one with a Christmas star and one with a Cristmas bell. Each ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.

The molds are also available separately.

Silicone mold for 2 small Christmas Baubles with a Decorative Ribbon. Each bauble is 10 cm (4") wide, 13.5 cm (5 1/3") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 15 cm (6") and 20 cm (8") wide, see the attached picture (for illustrative purposes, this item is only for the small Baubles mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a large Druzy (crystal) Wreath. The external diameter of the wreath is 22 cm (8 2/3") and the internal diameter is 14 cm (5 1/2"). The wreath is 23 mm (9/10") high.

Resin quantity: approx. 360 gr. (13 oz)

A dazzling statement piece for every season! This mold is a true showstopper, featuring a fully textured, sparkling crystal surface in a beautifully round design. Whether you're creating elegant home decor, festive holiday pieces, or unique resin art with embedded fairy lights, this mold offers endless creative possibilities. With its generous depth, it's perfect for experimenting with colors, layers, lights and glowing effects. Let your imagination shine and craft something truly magical!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a Christmas ornament with a Druzy Crystal Christmas tree. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.

We have 2 more Druzy Crystal ornament molds of the same size available, one with a Christmas star and one with a Christmas bell, see one of the pictures (for illustrative purposes, this item is only for the Crystal Christmas tree mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.