19 producten
19 producten
Sorteer op:
Magical coasters
€37,95 EUR
Eenheidsprijs perMagical coasters
€37,95 EUR
Eenheidsprijs perSilicone mold for a set of four 'Magical' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
This mold is one of our molds with the Magical theme, which further consists of a coaster holder mold, 4 trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the coasters mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
This mold is also available in a Holographic version.
Magical tray (L)
€34,95 EUR
Eenheidsprijs perMagical tray (L)
€34,95 EUR
Eenheidsprijs perSilicone mold for a large 'Magical' tray. The tray is 25.5 cm (10") wide and 8 mm (1/3") thick.
This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 2 smaller trays, a larger tray and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the large tray mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Holographic Magical coasters
€39,95 EUR
Eenheidsprijs perHolographic Magical coasters
€39,95 EUR
Eenheidsprijs perSilicone mold for a set of 4 Holographic Magical coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
These coasters have the same shape as our other Magical coasters, but then with a holographic color effect, which will transfer to the surface of your resin coasters.
There are also molds available for a holographic Magical coaster holder and a holographic Magical tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.
This mold is also available in a normal version, wihout the holographic color effect.
Magical tray (XL-14")
€56,95 EUR
Eenheidsprijs perMagical tray (XL-14")
€56,95 EUR
Eenheidsprijs perSilicone mold for an extra large (XL) 'Magical' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.
This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Set of 3 molds - Magical coasters with holder and tray
Set of 3 molds - Magical coasters with holder and tray
- a set of four 'Magical' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
- a matching holder. The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
- a large 'Magical' tray. The tray is 25.5 cm (10") wide and 8 mm (1/3") thick.
Holographic Magical tray (L)
€44,95 EUR
Eenheidsprijs perHolographic Magical tray (L)
€44,95 EUR
Eenheidsprijs perSilicone mold for a large Holographic Magical tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.
The mold has a holographic color effect, which will transfer to the surface of your resin artwork.
We also have holographic Magical molds available for coasters and a coaster holder, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Magical tray mold).
We also have Magical trays available in a normal version, without the holographic color effect.
Holographic Magical tray (S)
€24,95 EUR
Eenheidsprijs perHolographic Magical tray (S)
€24,95 EUR
Eenheidsprijs perSilicone mold for a small Holographic Magical tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.
The mold has a holographic color effect, which will transfer to the surface of your resin artwork.
The same shape of this holographic tray is also available in size Large 28 cm (11") .
Set of 3 molds - Magical trays (S + M + L)
Set of 3 molds - Magical trays (S + M + L)
Set of three silicone molds for our trays with the Magical theme. The trays are 15 cm (6"), 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.
These three molds are part of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, an XL tray and a set of 8 medallions.
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Set of 2 molds - Magical trays (S + M)
Set of 2 molds - Magical trays (S + M)
Set of two silicone molds for our trays with the Magical theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.
These two molds are part of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder, 2 larger trays and a set of 8 medallions.
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Set of 2 molds - Magical coasters with matching holder
Set of 2 molds - Magical coasters with matching holder
- a set of four 'Magical' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
- a matching holder. The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Set of 2 molds - Holographic Magical coasters with matching holder
Set of 2 molds - Holographic Magical coasters with matching holder
- a set of four Magical coasters The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
- a matching holder. The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
These silicone molds have holographic color effects, which will transfer to the surface of your resin artwork. Both molds are also available in a normal version, without the holographic color effect.
Magical tray (M)
€25,95 EUR
Eenheidsprijs perMagical tray (M)
€25,95 EUR
Eenheidsprijs perSilicone mold for a medium sized 'Magical' tray. The tray is 20 cm (8") wide and 8 mm (1/3") thick.
This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, one smaller tray, 2 larger trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the medium sized tray mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Set of 2 molds - Magical trays (M + L)
Set of 2 molds - Magical trays (M + L)
Set of two silicone molds for our trays with the Magical theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.
These two molds are part of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, a smaller tray, a larger tray and a set of 8 medallions.
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Medallions - Magical
€25,95 EUR
Eenheidsprijs perMedallions - Magical
€25,95 EUR
Eenheidsprijs perSilicone mold for a set of eight decorative (napkin ring) medallions, with our Magical shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.
This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Magical tray (S)
€19,95 EUR
Eenheidsprijs perMagical tray (S)
€19,95 EUR
Eenheidsprijs perSilicone mold for a small 'Magical' tray. The tray is 15 cm (6") wide and 8 mm (1/3") thick.
This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 larger trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the small tray mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Set of 3 molds - Holographic Magical coasters with holder and tray
Set of 3 molds - Holographic Magical coasters with holder and tray
- a set of four Magical coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
- a matching holder. The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
- a large Magical tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.
These silicone molds have holographic color effects, which will transfer to the surface of your resin artwork. The molds are also available in a regular version, without the holographic color effect.
Medallions - Holographic Magical
€28,95 EUR
Eenheidsprijs perMedallions - Holographic Magical
€28,95 EUR
Eenheidsprijs perSilicone mold for a set of eight Holographic Magical (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.
These medallions are the same as our normal Magical medallions, but then with a holographic color effect, which will transfer to the surface of your resin medallions.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.
Holder for the Magical coasters
€22,95 EUR
Eenheidsprijs perHolder for the Magical coasters
€22,95 EUR
Eenheidsprijs perSilicone mold for a holder for our Magical coasters.
The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.
This mold is one of our molds with the Magical theme, which further consists of a coaster mold, 4 trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster holder mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
The holder mold is also available in a Holographic version.
Holographic holder for the Magical coasters
€24,95 EUR
Eenheidsprijs perHolographic holder for the Magical coasters
€24,95 EUR
Eenheidsprijs perSilicone mold for a Holographic holder for 4 (holographic) Magical coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.
The holder mold is also available in a normal version, without the holographic effect.
This holder is a perfect match for the Holographic Magical coasters, see one of the pictures (for illustrative purposes, this item is only for the holder mold). Both holographic molds are also as a set of 2 molds available, for a special setprice.
The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.
This mold is also available in a normal version, without the holographic color effect.