Nieuwe mallen

Silicone mold for a Holographic holder for 4 (holographic) Oriental coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Oriental coasters, see one of the pictures (for illustrative purposes, this item is only for the holder mold). Both holographic molds are also as a set of 2 molds available, at a special setprice.

The legs of the holder are 44 mm (1 3/4") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This mold is also available in a normal version, without the holographic color effect.

Silicone mold for a set of 4 Holographic Oriental coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Oriental coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Oriental coaster holder and a large holographic Oriental tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a set of eight Holographic Oriental (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick. 

These medallions are the same as our normal Oriental medallions, but then with a holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Set of 2 silicone molds for Wall Art panels. The panels are titled Parallel Tubes and Diagonal Tubes. Each panel is e panel is 20 x 20 cm (8"x 8") wide and they  can maximum be 19 mm (3/4") thick. 

!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in shiny (glossy) panels, they will have a matte finish.

The molds are also available separately.

Silicone mold for an Art panel, titled Diagonal Tubes. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 19 mm (3/4") thick. 

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We also have another, similar, Tubes mold avalable, but then with parallel tubes. both molds are also available as a set, for a special setprice.

Silicone mold for an Art panel, titled Parallel Tubes. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 19 mm (3/4") thick. 

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We also have another, similar, Tubes mold avalable, but then with diagonal tubes. both molds are also available as a set, for a special setprice.

Set of 2 silicone molds for Art panels, titled Dunes. Both panels are 20 x 20 cm (8"x 8") wide and they can maximum be 18 mm (7/10") thick. 

Make a statement! This set of Dunes I and Dunes II molds offers a seamless, serene flowing sand dunes pattern that can be spread across your entire wall. Ideal for those looking to create a large, impactful wall decoration. The matte finish makes them perfect for Jesmonite and similar products, allowing you to capture both the texture and natural beauty of sand dunes perfectly.

Both molds are also available separately.

!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in shiny (glossy) panels, they will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Dunes II. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick. 

Bring nature into your home with this panel mold! As our other Dunes panel mold (Dunes I), this mold too features a similar serene flowing sand dunes pattern. You can use the mold as a standalone piece, perfect for creating unique wall decor. The matte finish ensures a perfect texture when used with Jesmonite and similar products. 

However, did you know you can cover an entire wall by combining Dunes I and Dunes II? Pair this mold with our Dunes I mold (available separately), to create a continuous pattern across your wall, as you can see in some of the pictures. Both molds are also available as a set, for a special setprice.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Dunes I. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick. 

Transform your wall into a piece of art! This stunning mold features a subtle, flowing pattern reminiscent of serene sand dunes. The matte finish makes it perfect for working with Jesmonite and similar products that benefit from a natural, calm aesthetic.

Pair this mold with our Dunes II mold (available separately), to create a continuous pattern across your wall, as you can see in some of the pictures. Both molds are also available as a set, for a special setprice.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Impact. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick. 

Create striking wall art with our Impact panel mold. Designed with bold, concentric shapes that "collide" for a dynamic, repeating pattern, this mold allows you to craft stunning, custom wall decor. Perfect for working with Jesmonite, Jesin or similar materials, the matte finish ensures a beautifully smooth, modern look. Combine multiple panels for endless design possibilities and turn your wall into a unique eyecatcher.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an XL Teapot tray. The teapot is 35.5 cm (14") wide, 25.4 cm (10") high and 8 mm (1/3") thick.

"Pour yourself some creativity with our XL Teapot Mold! 🍵

At a generous 35.5 cm wide, this teapot mold is perfect for those who love to go big with their crafting projects, and the large elegant design allows you to make a stunning decor piece, for instance for your dinner table.

Want to create a full tea set? Pair it with our teacup tray molds (large and XL) or even our teacup coasters mold for a charming collection (cup molds are available separately). The possibilities are as endless as your imagination!"

Silicone mold for an XL Cup tray. The tray is 35.5 cm (14") wide, 25.5 cm (10") high and 8 mm (1/3") thick.

There are also molds available for a smaller Cup tray,  which is 25 cm (10") wide, and for a set of 4 Cup coasters, see one of the pictures (for illustrative purposes, this item is only for the XL Cup tray mold).

Silicone mold for a 3D Lion head. The head is 18 cm (7") wide and 30 mm (1 1/5") thick.

"Unleash the king of the jungle! 🦁

Craft a truly fierce masterpiece with this mold of a bold lion head. With its strikingly intimidating expression and 3 cm depth, this glossy mold is perfect for creating stunning decor pieces. Whether you’re working with Jesmonite or resin, this mold ensures a jaw-dropping result every time. Let your creativity roar!"

Set of 2 silicone molds for 4 Cascade Pebble coasters with a matching large tray. The coasters are 11 cm (4 1/3") wide, 13 cm (5 1/5") high and 9 mm (1/3") thick. The tray is 20.5 cm (8") wide, 25 cm (10") high and also 9 mm (1/3") thick.  

The coasters and tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Silicone mold for a set of four Cascade Pebble coasters. The coasters are 11 cm (4 1/3") wide, 13 cm (5 1/5") high and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a large and an extra large Pebble tray mold available with the same Cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). The large tray mold and this coaster mold are also available as a set, at a special price.

Silicone mold for a large Cascade Pebble tray. The tray is 20.5 cm (8") wide, 25 cm (10") high and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

We have this tray also in an XL version available.

There is also a Pebble coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the Pebble tray mold). Both molds are also available as a set, at a special price.

Set of 2 silicone molds for 4 Cascade Round coasters with a matching large tray. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. The tray is 26.2 cm (10 1/3") wide and also 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Silicone mold for a set of four Cascade Round coasters. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a large round tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for a large Cascade Round tray. The tray is 26.2 cm (10 1/3") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a round coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the round tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a lovely cat, called Gary. Gary is 21 cm (8 1/4") wide and high and 2.5 cm (1") thick, which means that Gary can easily sit on its own.

Calling all cat lovers! Craft your purr-fect feline masterpiece with this 2.5 cm thick cat mold. Whether it’s a sleek black cat or a calico cutie, your creations will stand tall and proud on a dressoir or table. A meow-some addition to any creative project!

Oh, Gary has a friend, a cute dog, and they get along very well, as shown in one of the pictures (for illustrative purposes, this item is only for the cat mold).

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) cat, it will have a matte finish.

Silicone mold for a handsome dog, called George. George is 25 cm (10") wide and 20 cm (8") high. He is also 2.5 cm (1") thick, which means that George can easily stand on its own feet.

Unleash your creativity with this adorable dog mold! Standing tall and proud at 2.5 cm thick, this mold is perfec to use with Jesmonite, Jesin and similar creative materials. And whether you call him George or give him some other nice name, your handcrafted dog will sit pretty on any shelf or desk!

By the way, George has a playmate, a sweet cat, and they get along very well, as shown in one of the pictures (for illustrative purposes, this item is only for the dog mold).

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) dog, it will have a matte finish.

Silicone mold for a medium size Druzy (crystal) Geode Trinket dish. The external diameter of the dish is 18.5 cm (7 1/4") and the internal diameter is 14.5 cm (5 2/3"). The total height of the trinket dish is 18 mm ( 2/3"), with a raised inner edge of 13 mm (1/2"). The shiny bottom of the dish is 5 mm (1/5") thick.

Resin quantity: approx. 225 gr. (8 oz)

Add a little magic to your craft projects with this mold for a stunning trinket dish, made of beautiful druzy crystals. Its glossy, sparkling finish is just the beginning, thanks to the 13 mm (1/2") high inner edge there’s plenty of room for your creative ideas! Use inlay molds, shapes or anything else that inspires you to make a one-of-a-kind piece. Perfect for any crafter looking to add a touch of elegance and creativity!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a large round Wall Hanging. The diameter is 25 cm (10"), 8 mm (1/3") thick and it has two large hanging loops, for putting a cord or ribbon through.

This mold is perfect for crafting stunning resin art to decorate any space. Let your creativity flow and design beautiful, personalized décor that adds a special touch to your home. Elevate your walls with custom-made resin masterpieces!