Onderzetters

Silicone mold for a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.

There are also Scallop molds available for a matching coaster holder / small tray, trays in different sizes and for medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a set of 4 round coasters with a ribbed edge. The coasters are 10 cm (4") wide and 8 mm (1/3") thick.

There are also molds available for a matching coaster holder and ribbed edge trays in 3 different sizes, see one of the pictures (for illustrative purposes, this item is only for the coaster mold). Some of these molds are also in a set available, for a special setprice.

Silicone mold for two Geode coasters. The coasters are about 12.5 cm (5") wide and 8 mm (1/3") thick.

The shape of the two coasters is based on our original Geode coasters, designed back in 2020 and for which we still have a mold separately available as a set of four Geode coasters.

Silicone mold for a set of 4 Holographic Magical coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Magical coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Magical coaster holder and a holographic Magical tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide, 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.

There are also molds available for a small heart shaped tray / coaster holder (designed for these coasters) and for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

Silicone mold for a set of four 'Oriental' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster holder mold, 4 trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the coasters mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

This mold is also available in a Holographic version.

Silicone mold for a set of 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays with the same graceful line pattern available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

The molds are also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Double, double toil and trouble, fire burn and cauldron bubble! (William Shakespeare)

Silicone mold for 4 coasters in the shape of a Whitch's Cauldron!! The cauldrons are 12.5 cm (5") wide, about 10 cm (4") high and 8 mm (1/3") thick.

There is also a mold available for a large Cauldron tray that can for instance be used for Halloween frontdoor or wall decoration. And both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the cauldron coaster mold).

Silicone mold for 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.

There is also a mold available for a large Pumpkin tray and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin coaster mold).

Silicone mold for a set of four round coasters with a decorative 'Merry Christmas' engraving. The coasters are 10 cm ( 4") wide and 8 mm (1/3") thick.

There is also a mold available for a matching holder and both molds are also as a set available.

We also have a set of 3 molds available, with the coaster mold, the holder mold and a 28 cm (11") tray mold, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Silicone mold for a set of four round coasters with a 'Wild Water' effect on the surface. The coasters are 11.5 cm (4 1/2") wide and 9 mm (1/3") thick. 

Unleash your creativity with our 'Wild Water' round coasters! These unique coasters feature a rough texture that mimics the wild water effect, adding a bold touch to your drink serving experience.

Silicone mold for a set of four coasters, engraved with the Mandala Peacock. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

The coaster mold is part of our 'Peacock Mandala' design line, in which besides this mold are also three cake stand molds (with center hole), a coaster holder and a mold for 8 medallions.

The coaster mold and holder mold are also as a set available, for a special setprice.

Silicone mold for a set of 4 Oval coasters. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

We have the molds also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

There is also a mold available for the same size oval coasters, but then engraved with thin 'Graceful lines'.

Silicone mold for a set of four Geode coasters with the Crushed Ice effect. The coasters have a raised edge and are about 11 cm (4 1/3") wide and 8 mm (1/3") thick. 

There are also molds available for a large and extra large Geode tray that have the same Crushed Ice effect and raised edge, see one of the pictures for an example (for illustrative purposes, this item is only for the coaster mold).

Silicone mold for a set of four Cascade Daisy coasters. The coasters are 12 cm (4 3/4") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Daisy tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for 4 Halloween coasters, featuring a Spiderweb! And the spider is still in the web, hunting for a treat!

The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The Webdesign is 0.75 mm thick and it will be raised on the surface of the coasters.

There is also a mold available for a large Spiderweb tray, with an even larger Spider, and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb coaster mold).

Silicone mold for a set of four Cascade Hexagon coasters. The coasters are from side to side 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Hexagon tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.