Producten

Silicone mold for 4 round pendants with keychain holes. The pendants are 6 cm (2 1/3") wide and 1 cm (2/5") thick.

There is also a mold available with 9 pendants.

Silicone mold for 9 round pendants with keychain holes. The pendants are 6 cm (2 1/3") wide and 1 cm (2/5") thick.

There is also a mold available with 4 pendants.

Silicone mold for a Round Tealight Candle Holder. The candle holder is 8 cm (3 1/6") wide and 6 cm (2 1/3") high.

The candle holder mold is pretty high and therefore very suitable for pouring flowers, for example.

You can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.

We also have 'deep-pour' molds available for other tealight candle holders, as seen in some of the pictures (for illustrative purposes, this item is only for the Round tealight candle holder mold).

Silicone mold for a large tray with the Lily Mandala engraved into it. The tray is 25 cm (10") wide and 8 mm (1/3") thick.

The tray mold is part of our Lily Mandala line, in which besides this mold are also molds available for a set of 4 coasters, a coaster holder and a set of 8 medallions, as shown in one of the pictures (for illustrative purposes, this item is only for the tray mold).

Siliconen mal voor een XL Mandala tray met het AUM symbool er in gegraveerd. De tray is 35.5 cm in diameter en 8 mm dik.

Het AUM symbool vertegenwoordigt de trilling, geluid en bewustzijn van het universum. Het is de plaats waar alle geluiden en trillingen ontstaan ​​en wordt vaak gezongen aan het begin en het einde van het beoefenen van Yoga en wordt veel gebruikt tijdens de meditatie.

Siliconen mal voor een middelgrote tray met een Yin Yang er in gegraveerd. Twee zonnebloemen vormen het symbool en dezelfde Yin Yang is ook gebruikt in de mal voor de vier ronde Yin Yang onderzetters. De tray is 25 cm breed en 8 mm dik.

De tray is ook in een 35,5 cm grote XL versie verkrijgbaar, zie één van de foto's voor een vergelijking van de twee maten (ter illustratie, dit item is alleen voor de tray van 25 cm).

Siliconen mal voor een XL tray met een Yin Yang er in gegraveerd. Twee zonnebloemen vormen het symbool en dezelfde Yin Yang is ook gebruikt in de mal voor de vier ronde Yin Yang onderzetters. De tray is 35,5 cm breed en 8 mm dik.

De tray is ook in een 25 cm grote versie verkrijgbaar, zie één van de foto's voor een vergelijking van de twee maten (ter illustratie, dit item is alleen voor de tray van 35,5 cm).

Silicone mold for a large round Trinket Dish. The Trinket Dish has a diameter of 23 cm (9") and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are also molds for a smaller and larger round Trinket Dish available, see one of the pictures (for illlustrative purposes, this item is only for the large round Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for a medium size round Trinket Dish. The Trinket Dish has a diameter of 18 cm (7") and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are two larger round Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the medium size round Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for an XL round Trinket Dish. The Trinket Dish has a diameter of 28 cm (11") and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are also molds for two smaller round Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the XL round Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for a Royal Coaster XL. This supersized coaster is appr. 14.5 x 17 cm (5 2/3" x 6 2/3") and 1.5 cm ( 3/5") thick.

Because of this thickness, it's possible to create beautiful resin 3D-flowers and you can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.

(The tealight candle holder, as seen in one of the pictures, is made with one of our other molds, and both molds are also as a set available).

Silicone mold for a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.

There are also Scallop molds available for a matching coaster holder / small tray, trays in different sizes and for medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a set of eight decorative Scallop medallions. Each medallion is 5.5 cm (2 1/6") x  4.8 cm (1 9/10") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray and two larger trays, see one of the pictures (for illustrative purposes, this item is only for the medallions mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for an XL Scallop tray. The tray is 33 cm (13") x 28.5 cm (11") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray, a large tray and for medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and the large tray), for special setprices.

Silicone mold for a large Scallop tray. The tray is 25 cm (10") x 22.5 cm (9") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray, an XL tray and for medallions, see one of the pictures (for illustrative purposes, this item is only for the large tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and this large tray), for special setprices.

Two silicone molds for:

• a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick.
• a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Two silicone molds for:

• a set of four round coasters with a 'Wild Water' effect on the surface. The coasters are 11.5 cm (4 1/2") wide and 9 mm (1/3") thick. 
• a large round tray with a 'Wild Water' effect on the surface. The tray is 30 cm (11 4/5") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Silicone mold for a set of 2 medium sized Decoration eggs. The eggs are 17,5 cm (7") tall and 6 mm (1/4") thick.

The mold can be used to make beautiful decorations for an Easter branch or tree.

We also have molds for smaller decoration eggs (including a holographic egg mold) and a tray in our collection.

Two silicone molds for:

• a set of four square Kintsugi coasters (Kintsugi is the Japanese art of fixing broken pottery). The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Kintsugi coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the supports with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).