Producten

Silicone mold for a holographic holder for 4 round coasters of 8 mm (1/3") thick. The holder is suitable for every round coaster with a diameter of 10 cm (4"), but it's especially meant for our holographic round coasters, for which we have a mold available separately.

The legs of the holder have a holographic finish too, they are 40 mm (1 3/5") tall and you insert them from the bottomside through the slots of the 6 mm (1/4") thick base plate. You can fix the legs with a drop of glue or (UV) resin, so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Holographic holder for 4 round Geode coasters, that are maximum 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is the same as the holder for our normal round Geode coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coaster holder.

This holder is specifically designed for our Holographic Geode Coasters, see one of the pictures (for illustratives purposes, this item is only for the holder mold). Both the holographic holder and matching coaster mold are as a set available, for a special setprice.

You insert the legs from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Holographic holder for 4 (holographic) Fantasy coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Fantasy coasters, see one of the pictures (for illustrative purposes, this item is only for the holographic holder mold). Both holographic molds are also as a set of 2 molds available, for a special setprice.

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Holographic holder for 4 (holographic) Magical coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Magical coasters, see one of the pictures (for illustrative purposes, this item is only for the holder mold). Both holographic molds are also as a set of 2 molds available, for a special setprice.

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This mold is also available in a normal version, without the holographic color effect.

Set of 4 silicone Holographic Inlay molds, with a Flower engraved into them. Each inlay mold is 12.5 cm wide and appr. 3 mm (1/8") thick and they fit perfectly in our 15 cm (6") round molds (geode style, ribbed edge and basic round mold). 

The holographic color effect will transfer to the surface of your resin piece. Please be aware that when you pour a finishing (top) layer over the holographic piece, the holographic effect will be gone! We therefore advise not to use a top coat.

Set of 4 silicone Holographic inlay molds, in the shape of a heart. Each heart is 13.3 cm (5 1/4") wide, 11.8 cm (4 2/3") tall and appr. 5 mm (1/5") thick.

These inlay molds are especially designed for our heart shaped coaster mold, which is available separately. Because the inlay molds are appr. 5 mm thick, the result will be a heart shaped coaster with a raised edge.

The molds have a holographic color effect, which  will transfer to the surface of your resin hearts. Please be aware that when you pour a finishing (top) layer over the holographic piece, the holographic effect will be gone! We therefore advise not to use a top coat.

Silicone square inlay mold with a Holographic decorative lead glass 'Daisy bud' pattern. The mold is 18 x 18 cm (7" x 7") wide and 5 mm (1/5") thick. The 'Daisy bud' pattern is 0.75 mm deep.

This inlay mold will make a great combination together with our 20 x 20 cm (8" x 8") large tray molds of 1 cm (2/5") and 2 cm (4/5") thickness. Using the two molds together will create a tray with a raised edge of 5 mm (1/5").

There is also a larger normal version of this inaly mold available, without the holographic color effect. And we also have 8 mm (1/3") tray molds with this 'Daisy bud' pattern available, in a normal and in a holographic version.

Silicone mold for two Holographic Intertwined Hearts. The hearts are 8 mm (1/3) thick and together they are 26.5 cm (10 2/5") wide and 19.5 cm (7 2/3") tall.

The mold has a holographic color effect, which  will transfer to the surface of your resin hearts.

The mold is also available in a regular verison, without the holographic color effect.

Slicone mold for a Holographic telephone stand. We call this specific effect 'Crazy Holo' and the holographic color effect will transfer to the surface of your resin telephone stand.

The stand is 6 mm ( 1/4") thick and the space above the edge is 80 mm (3 3/5") wide and 130 mm (5 1/10") high.

The same design is also available in a regular version, without holographic effect.

Silicone mold for a set of 4 Holographic Magical coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Magical coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Magical coaster holder and a holographic Magical tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a large Holographic Magical tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have holographic Magical molds available for coasters and a coaster holder, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Magical tray mold).

We also have Magical trays available in a normal version, without the holographic color effect.

Silicone mold for a small Holographic Magical tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

The same shape of this holographic tray is also available in size Large 28 cm (11") .

Silicone mold for a set of four Holographic round coasters of 10 cm (4") wide and 8 mm (1/3") thick.

These coasters are the same as our normal round coasters, but then with a Holographic color effect, which  will transfer to the surface of your resin coasters. We call this specific effect 'Color Burst'!

We also have a mold separately available for a holographic round coaster holder, see one of the pictures (for illustrative purposes, this item is only for the coaster mold). 

Silicone mold for a large Holographic Geode tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have matching holographic Geode molds available for coasters, a coaster holder and medallions, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Geode tray mold). The 3 molds are also available in 2 different sets, for special setprices.

Update: We now have the same holographic tray also in a smaller 18 cm (7") version available.

Silicone mold for a small Holographic Geode tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We have the same holographic tray also in a larger 28 cm (11") version available.

Silicone mold for a set of four Holographic square coasters of 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

These coasters are the same as our normal square coasters, but then with a Holographic color effect, which  will transfer to the surface of your resin coasters. We call this specific effect 'Color Burst'!

The holographic coasters will fit in the holder for the normal square coasters, which is separately available.

Silicone inlay mold with an engraved 'Mermaid circles' pattern. The mold is 24 cm (9 2/5 ") wide and no less than 5.5 mm (1/5") thick, with a straight edge. Therefore it's quite easy to make a tray with raised edge when this inlay mold is used in another larger and deeper round(ish) mold.

There are also two other sizes available, 15.5 cm (6 1/10") and 19.8 cm (7 4/5").

Silicone inlay mold with an engraved 'Mermaid circles' pattern. The mold is 19.8 cm (7 4/5 ") wide and no less than 5.5 mm (1/5") thick, with a straight edge. Therefore it's quite easy to make a tray with raised edge when this inlay mold is used in another larger and deeper round(ish) mold.

There are also two other sizes available, 15.5 cm (6 1/10") and 24 cm (9 2/5").

Silicone inlay mold with an engraved 'Mermaid circles' pattern. The mold is 15.5 cm (6 1/10 ") wide and no less than 5.5 mm (1/5") thick, with a straight edge. Therefore it's quite easy to make a tray with raised edge when this inlay mold is used in another larger and deeper round(ish) mold.

There are also two other sizes available, 19.8 cm (7 4/5") and 24 cm (9 2/5").

Silicone inlay mold with a Honeycomb engraving. The size of the inlay mold is 26 x 30 cm ( 10 1/5" x  11 4/5") and it is appr. 4 mm (1/6") thick.

The inlay is specifically matched to the size of our Large 31 cm (12 1/8") Hexagon tray (item MOSH0193) and the thickness of this inlay mold makes it easy to create a tray with raised edge, by using this large tray mold.

The same design inlay mold is also available for the 23 cm (9") medium Hexagon tray and there is a holographic inlay mold for the medium sized Hexagon tray as well, as shown in one of the pictures (for illustrative purposes, this item is only for the Large sized honeycomb inlay mold).

Silicone inlay mold with a Honeycomb engraving. The size of the inlay mold is 19x 22 cm ( 7 1/2" x  8 2/3") and it is appr. 4 mm (1/6") thick.

The inlay is specifically matched to the size of our 23 cm (9") Medium Hexagon tray (item MOSH0192) and the thickness of this inlay mold makes it easy to create a tray with raised edge, by using that tray mold.

The same design inlay mold is also available for the 31 cm (12 1/8") large Hexagon tray and there is a holographic inlay mold for the medium sized Hexagon tray as well, as shown in one of the pictures (for illustrative purposes, this item is only for the Medium sized honeycomb inlay mold).

Holographic silicone inlay mold, hexagon shaped. The size of the inlay mold is 19 x 22 cm ( 7 1/2" x  8 2/3") and it is appr. 4 mm (1/6") thick. The inlay mold has a holographic color effect, which will transfer to the surface of your Hexagon tray.

The inlay is specifically matched to the size of our 23 cm (9") Medium Hexagon tray (item MOSH0192) and the thickness of this inlay mold makes it easy to create a tray with raised edge, by using that tray mold.

There is also an inlay mold with a honeycomb engraving available, that has the same size, as shown in one of the pictures (for illustrative purposes, this item is only for the Medium sized holographic inlay mold).

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #1).