Alle mallen

Silicone mold for a Holographic Tealight Candle Holder with Rudolph the Red Nosed Reindeer. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. Rudolph is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Silicone mold for an XL Oval tray. The tray is 24 x 35 cm (9 2/5" x 13 3/4") wide, 1 cm (2/5") thick and it is engraved with thin graceful lines.

There are also molds available for matching coasters, a coaster holder and a smaller tray, all engraved with the same graceful line pattern.

This tray is also available in a plain version.

Silicone mold for a large Amethyst. The size of the Amethyst is about 11 cm (4 1/3") x 10 cm (4") and maximum about 3.5 cm (1 1/3") high.

Silicone mold for 12 extra small Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 8 cm (3 1/6") high and 6 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 11 cm (4 1/3") to 30 cm (12").

Silicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Silicone mold for a large Cascade Geode tray. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a smaller tray mold available with the same cascade design. 

Set of two silicone molds for 4 Hexagon coasters and a matching holder. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The matching holder can hold four Hexagon coasters of 8 mm thick. The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

These two molds are part of our line of Hexagon molds, which also consists of two hexagon trays, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There are also two special prized sets of 3 molds available with these two molds, one set with the medium sized hexagon tray and one set with the large hexagon tray.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder.

Tic-Tac-Toe is a game for 2 players who take turns marking the spaces in a 3×3 grid with an X or an O. The player who succeeds in placing three of their marks in a diagonal, horizontal or vertical row is the winner. It's a fun and not that easy game.

With this silicone mold you can make your own personalized Tic-Tac-Toe board game. The dimensions of the game board are 22 cm (8 2/3") x 16 cm (6 1/3") and it consists of 3 layers:

• a 1 mm (1/25") thin layer for the title of the game plus a divider
• a 6 mm (1/4") thick playing field layer (which includes a holder for the tenth game piece) 
• a 4 mm (1/6") thick baseplate layer.

The three layers makes it possible to vary endlessly with colored resin.

Two silicone molds for a medium size and a large Trinket Dish. The medium Trinket Dish is 12.5 x 25 cm (5" x 10") wide and the large Trinket Dish is 15 x 30 cm (6" x 12") wide.

Both Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Set of 2 silicone molds for 4 Cascade Geode coasters with a matching tray. The coasters are about 12.5 cm (5") wide and 9 mm (1/3") thick. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

There is also a a smaller Geode tray mold available with the same cascade design.

Silicone mold for a set of 4 Holographic Magical coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Magical coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Magical coaster holder and a holographic Magical tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a medium sized 'Fantasy' tray. The tray is 20 cm (8") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 larger trays, 1 smaller tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a small Cascade Geode tray. The tray is about 18 cm (7") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a larger tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the small tray mold).

Silicone mold for an extra large (XL) 'Magical' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Siliocone mold for a round disc with ribbed edge. The disc is 25 cm (10") wide and  8 mm (1/3") thick.

There are also molds available for a smaller ribbed edge tray of 15 cm (6"), for an XL ribbed edge tray of 35.5 cm (14") and for ribbed edge coasters and matching coaster holder, see one of the pictures (for illustrative purposes, this item is only for the 25 cm disc mold). Some of these molds are also in a set available, for a special setprice.

Silicone mold for a large round tray with rough sides. The tray has a diameter of 22.5 cm (9") and it is 12 mm (1/2") thick.

Introducing our mold for a Rough & Tough round tray! Create a unique decorative tray with rough edges and a shiny surface. The mold is thick and large, perfect to showcase your creativity. The result will be a true masterpiece, whether you made the tray with resin or acrylic resin.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for an XL Trinket Dish. The Trinket Dish is 17.5 x 35 cm (7" x 14") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

There are also molds for two smaller Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the XL Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide, 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.

There are also molds available for a small heart shaped tray / coaster holder (designed for these coasters) and for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

Set of two silicone molds for our trays with the Fantasy theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 1 smaller tray, 1 larger tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.