Alle mallen

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

And this 'Mikado' pattern is also available for round and square coasters, see one of the pictures (for illustrative purposes, this item is only for the hexagon inlay molds).

Silicone mold for a large Geode tray with Crushed Ice effect. The tray is 25 cm wide (10") and has a raised edge.

There is also a mold for an identical larger tray, which is 35 cm wide (14"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the large tray mold).

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #2).

Silicone mold for a medium size Lavatera Flower Tray. The tray is 22.5 cm (8 9/10") wide, 20.5 cm (8") high and 8 mm (1/3") thick.

Create an elegant floral centrepiece with this medium Lavatera tray mold. Its softly shaped petals and subtle engraved details give the finished piece beautiful depth and character. The generous surface leaves plenty of room for colour effects, glitter and botanical inclusions. Use it as a decorative tray or combine it with another size to create a stunning tiered cake stand.

This mold is part of our Lavatera Flower Collection, which includes trays in three different sizes and a mold for four Lavatera coasters. The tray molds are also available in several money-saving sets.

Silicone mold for a medium size Flower Tray, shaped as a Poppy. The tray is 20 cm (8") wide, 15 cm (6") high and 8 mm (1/3") thick. The petals are delicately engraved.

Nature meets function! This medium-sized Poppy Tray mold is perfect for creating a graceful centerpiece, a jewelry tray, or even a decorative catch-all dish. Its flowing petal shape makes every piece feel like a fresh spring day. Combine translucent resin with gold leaf or dried flowers for a truly stunning effect. Creativity is calling, will you answer?

The mold is part of our Poppy collection, which also includes molds for coasters, for 9 ornaments and for a larger tray.

Silicone mold for a large Cascade Hexagon tray. The tray is from side to side 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Hexagon coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a thick square block. The block is 20 x 20 cm (8" x 8") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

This square mold is suitable for deep pour projects, like flower preservation. We also have a deep pour square mold available in 15 x 15 cm (6" x 6") and in 25 x 25 cm (10" x 10").

Two silicone molds for:

• 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.
• a holder for these oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide, the baseplate is 8 mm (1/3") thick and it is engraved with thin graceful lines. You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the supports, because then they will no longer fit through the slots.

There are also molds available for two oval trays with the same graceful line pattern.

These two molds are together with the large oval tray 'Graceful lines' also as a set of 3 molds available, for a special setprice.

Silicone mold for an (Easter) Egg holder, featuring Little Thumper with his brothers and sisters! The egg holder is 20 cm (8") wide and 8 mm (1/3") thick, it can store up to 6 eggs.

The center has a hole of 6 mm (1/4"), which makes it easy to attach cakestand hardware to the holder and turn it into an even more decorative tray.

You can find Little Thumper not only on this egg holder, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a flower arranger and a tealight candle holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a Holographic holder for 4 round Geode coasters, that are maximum 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is the same as the holder for our normal round Geode coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coaster holder.

This holder is specifically designed for our Holographic Geode Coasters, see one of the pictures (for illustratives purposes, this item is only for the holder mold). Both the holographic holder and matching coaster mold are as a set available, for a special setprice.

You insert the legs from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Holographic holder for 4 (holographic) Hexagon coasters which are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Hexagon coasters, see one of the pictures (for illustrative purposes, this item is only for the holder mold).

Both holographic molds are also as a set of 2 molds available, for a special setprice.

The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

Silicone mold for a large Lavatera Flower Tray. The tray is 27.5 cm (10 4/5") wide, 25 cm (10") high and 8 mm (1/3") thick.

Make a real statement with this large Lavatera flower tray. The flowing petal shape and delicate engraving create an elegant design with beautiful visual depth. Its larger surface is perfect for bold colour combinations, layered effects and eye-catching inclusions. Display it as a decorative centrepiece or use it as the foundation of an impressive tiered cake stand.

This mold is part of our Lavatera Flower Collection, which includes trays in three different sizes and a mold for four Lavatera coasters. The tray molds are also available in several money-saving sets.

Silicone mold for a Wall hanging, decorated with some beautiful wrapped Christmas gifts. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with Santa Claus flying through the sky.

Silicone mold for two Tube coasters. The coasters are 12.5 x 12.5 cm (5" x 5") wide and 1 cm (2/5") thick. The coasters have a flat bottom and the top consists of 5 adjacent tubes.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in the pictures.

We also have a mold available for a matching Tube tray, see one of the pictures (for illustrative purposes, this item is only for the Tube coasters mold). Both molds are also available as a set, for a special setprice.

Silicone mold for a square XL tray with a rough tumbled marble look and feel. The tray is 30.5 x 30.5 cm (12" x 12") wide and 12.5 mm (1/2") thick.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish.

We also have a mold available for a 20 x 20 cm square tumbled marble tray and a mold for 4 square tumbled marble coasters, see one of the pictures (for illustrative purposes, this item is only for the XL tumbled marble tray mold).

Silicone mold for a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick. 

Unleash your creativity with our 'Wild Water' oval coasters! These unique coasters feature a rough texture that mimics the wild water effect, adding a bold touch to your drink serving experience.

Silicone mold for a Trinket Dish in the shape of a Clover leaf. The Clover leaf is 25.5 x 25.5 cm (10" x 10") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge around the compartments is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick and each compartment of the Clover is appr. 11 x 11 cm (appr. 4 1/3" x 4 1/3 ") wide.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Clover leaf dish an elegant appearance! And because of the 4 compartments you can use the dish also as a serving tray!

There is also a Trinket Dish mold available in the shape of an Oak leaf. Other available molds for trinket dishes have an ovalish shape.

Silicone mold for a square tray with a rough tumbled marble look and feel. The tray is 20 x 20 cm (8" x 8") wide and 1 cm (2/5") thick.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish.

We also have a mold available for a 30 x 30 cm (XL) tumbled marble tray and a mold for 4 square tumbled marble coasters, see one of the pictures (for illustrative purposes, this item is only for the 20 x 20 cm tumbled marble tray mold).

Silicone square inlay mold with a decorative lead glass 'Daisy bud' pattern. The mold is 23 x 23 cm (9" x 9") wide and 5 mm (1/5") thick. The 'Daisy bud' pattern is 0.75 mm deep.

This inlay mold will make a great combination together with our 25 x 25 cm (10" x 10") large tray molds of 1 cm (2/5") and 2 cm (4/5") thickness, as shown in one of the pictures (resin artist: Resin Kreativwelt). Using the two molds together will create a tray with a raised edge of 5 mm (1/5").

There is also a smaller holographic version of this inaly mold available and we also have 8 mm (1/3") tray molds with this 'Daisy bud' pattern available, in a normal and in a holographic version.