Alle mallen

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

We also have a 28 cm (11") large tray mold available, with the same decorative engraving. 

Silicone mold for a Christmas themed winebutler for 6 glasses.

The winebutler has 2 layers, one layer is 8 mm (1/3") thick and the second layer, which is a Christmas wreath, is only 0.75 mm (1/34") thin. The Christmas wreath will be raised on the surface of the winebutler.

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

You can find Little Thumper not only on these two molds, he also appears on molds for a large tray, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a holder for the Mandala Jerusalema coasters. 

The baseplate of the holder is engraved with the 'Mandala Jerusalema' and especially designed for the coaster set with the same engraving, see the pictures (for illustrative purposes, this item is only for the holder mold).

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The holder mold is part of our 'Mandala Jerusalema' design line, in which besides this mold are also a small and medium sized tray, a set of four coasters and a set of 8 medallions, as shown in some of the pictures (for illustrative purposes, this item is only for the holder mold).

The holder mold and coaster mold are also as a set available, for a special setprice.

Silicone inlay mold with an engraved 'Mermaid circles' pattern. The mold is 19.8 cm (7 4/5 ") wide and no less than 5.5 mm (1/5") thick, with a straight edge. Therefore it's quite easy to make a tray with raised edge when this inlay mold is used in another larger and deeper round(ish) mold.

There are also two other sizes available, 15.5 cm (6 1/10") and 24 cm (9 2/5").

Silicone mold for a large cake stand, engraved with the Peacock Mandala. The cake stand is 30 cm (11 4/5") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The large cake stand mold is part of our 'Peacock Mandala' design line, in which besides this mold are also two smaller cake stands (to make a 2-tier or 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

This mold is also available in several sets, for a special setprice. 

Silicone mold for a small cake stand, engraved with the Peacock Mandala. The cake stand is 18 cm (7") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The small cake stand mold is part of our 'Peacock Mandala' design line, in which besides this mold are also two larger cake stands (to make a 2-tier or 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

This mold is also available in several sets, for a special setprice. 

Silicone mold for a set of four Cobble Coasters. The coasters are 13 cm (5 1/9") wide, 10.5 cm (4 1/7") high and 8 mm thick.

Create a beautifully coordinated set of four coasters with soft, organic shapes inspired by smooth cobblestones. Each coaster has its own subtle outline, giving the finished set a natural and relaxed look. The clean surfaces and polished edges are perfect for experimenting with marbling, layered colours, metallic effects or delicate inclusions. A stylish choice for modern table décor, handmade gifts or everyday use.

Silicone mold for 3 Door Hangers, each featuring a unique Halloween design (No. 1). The door hangers are 8 cm (3 1/8") wide, 21 cm (8 1/4") tall and 8 mm (1/3") thick.

Create three eye-catching Halloween door hangers, each with its own playful engraved design. This mold includes a witch’s broom, a stack of smiling pumpkins and a magical potion bottle filled with sweet treats. Add dramatic colours, metallic pigments, glitter or glow-in-the-dark effects to bring every detail to life. Perfect for decorating doors, creating seasonal signs or making unique Halloween gifts.

We also have another Halloween door hanger mold available, featuring three different designs.

Silicone mold for four Lavatera Flower Coasters. The coasters are 12.5 cm (5") wide, 11.5 cm (4 1/2") high and 8 mm (1/3") thick. The petals are delicately engraved.

Bring floral elegance to the table with this mold for four Lavatera coasters. Each coaster features the same graceful flower shape and subtle petal details as the matching trays. Play with coordinated colours, shimmering pigments or individual designs to make every coaster unique.

Beautiful on their own and even better when paired with one of the Lavatera trays, which are available in three sizes.

Set of two silicone molds for a small and a medium size Lavatera Flower tray. The small tray is 17.5 cm (6 9/10") wide and 16 cm (6 3/10") high, the medium size tray is 22.5 cm (8 9/10") wide and 20.5 cm (8") high. Both trays are 8 mm (1/3") thick.

This two-piece mold set combines the small and medium Lavatera trays, giving you even more ways to create with this elegant floral design. The subtle engraving adds depth to the petals while still leaving plenty of room for your own colours and effects. Use the trays separately for coordinated decorative pieces or combine them to build a beautiful two-tier cake stand. Two sizes, one graceful flower and endless creative possibilities.

These two molds are part of our Lavatera Flower Collection, which includes three different tray sizes, a mold for four Lavatera coasters and several carefully selected mold sets.

Silicone mold for four Poppy-shaped Coasters. The coasters are 12 cm (4 3/4") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick. The petals are delicately engraved.

Say hello to your new favorite coaster set! Inspired by wild Blooming Poppies, this mold makes four elegant, poppy-shaped coasters, that will instantly add a floral flair to your home. Whether you go for soft pastel tones or bold reds and blacks, just like real poppies, the possibilities are endless. It's time to pour, play, and bloom!

The mold is part of our Poppy collection, which also includes a mold for 9 ornaments and two tray molds.

Silicone mold for a medium size Halloween Bat Hanger. The bat is 25 cm (10") wide, 10 cm (4") high and 8 mm (1/3") thick. The raised decorative pattern is 1 mm thick.

We also have 2 other Bat Hanger molds available, with a width of 20 cm (8") and 30 cm (12"), see one of the pictures (for illustrative purposes, this item is only for the medium size Bat Hanger mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a small Halloween Bat Hanger. The bat is 20 cm (8") wide, 8 cm (3 1/4") high and 8 mm (1/3") thick. The raised decorative pattern is 1 mm thick.

We also have 2 other Bat Hanger molds available, with a width of 25 cm (10") and 30 cm (12"), see one of the pictures (for illustrative purposes, this item is only for the small Bat Hanger mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a large decorative Pumpkin tray, featuring a Tombstone Zombie! The tray is 28 cm (11") wide, 27 cm (10 2/3") high and 8 mm (1/3") thick. The Tombstone design is 0.75 mm thick and it will be raised on the surface of the tray.

Add some spooky fun to your Halloween decoration with your homemade Pumpkin tray featuring a Tombstone Zombie design. It will be a frightful sight and it's the perfect way to get you in the spooky spirit. Boo-tiful!

We also have another mold available for a large Halloween pumpkin tray, featuring a Spooky House.

Two silicone molds for a large and an XL round Trinket Dish. The large Trinket Dish has a diameter of 23 cm (9") and the XL Trinket Dish has a diameter of 28 cm (11").

Both Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Silicone mold for a set of eight decorative (napkin ring) medallions, with our Oriental  shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures for some of them (for illustrative purposes, this item is only for the medallion mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a Decorative Christmas ornament with a Christmas tree. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Christmas tree design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Snowflake and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Christmas tree mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.