Alle mallen

Silicone mold for a Halloween (Wall) Sign - 'Trick or Treat'. The sign is 30 cm (12") wide, 15.5 cm (6") high and 8 mm (1/3") thick. The raised decorative pattern, including the text, is 1 mm thick.

The sign has two large holes for a cord or ribbon.

Silicone mold for a larg Christmas Ornament with a Happy Santa Claus. Santa is 20 cm (8") high and 8 mm (1/3") thick.

We also have 4 other Happy Santa molds available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a large standing Gingerbread Man. The figure is 22.5 cm (8 9/10") high and 2.5 cm (1") thick, excluding the raised pattern of 2 mm.

Add some festive cheer to your home with a Standing Gingerbread Man! Perfect for adding a touch of Christmas spirit to your table, dresser or windowsill, this jolly little guy will bring a smile to your face. Plus, he doubles as a charming holiday decoration. Be creative, get this mold and make your own now!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Gingerbread man, it will have a matte finish.

Silicone mold for an Art panel, titled Botanicum. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick. 

Add an artistic touch to your interior with our 'Botanicum' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Botanicum' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a medium size Scallop with a 'Wild Water' effect on the surface. The scallop is 24 x 20 cm (9 1/2" x 8") wide and 9 mm (1/3") thick.

Crafted with a creative and unique design resembling wild water, the  scallop that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art.

Silicone mold for a large Cascade Roman tray. The tray is 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Roman coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a Decorative Christmas ornament with a beautiful Curls design. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Curls design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Snowflake, see one of the pictures (for illustrative purposes, this item is only for the Decorative Curls mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Set of two silicone molds for four irregular shaped Geode coasters and a matching holder. The Coasters are approx. 12.5 cm (5") wide and 15 mm (3/5") thick. The holder is 12 mm (1/2") thick.

Cure your thirst for something original with this set of 2 molds! The thick Geode coasters mold has an irregular shape and it comes with a holder mold, making it a unique set. Your guests won't be able to resist the 'rock'ing atmosphere! ;)

The molds are also available separately.

Silicone mold for a set of eight medallions, in the shape of a pair of Christmas Bells. There are also Christmas bells engraved into them. Each medallion is 5.5 cm (2 1/6") wide, 4.7 cm (1 4/5") high and 8 mm (about 1/3") thick.

Silicone mold for a set of four round Cute Christmas coasters. The coasters are 10 cm ( 4") wide, 8 mm (1/3") thick and they are engraved with a bunch of cute Christmas figures. 

There is also a mold available for a matching holder and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The figures in the coasters present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for an Easter Tealight Candle holder, featuring Little Thumper with his brothers and sisters! The candle holder is 16 cm (6 3/10") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on this candle holder, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a large Christmas Ornament with a Gingerbread House. The house is 18 cm (7") high, 20 cm (8") wide and 8 mm (1/3") thick.

We also have 4 other molds with the same Gingerbread House available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for Twin Tealight Candle Holders. The two identical candle holders are each 6 cm ( 2 1/3") wide and 4.5 cm (1 3/4") high.

This mold for two small, yet deep, round tealight candle holders is perfect for your next project. With the deep pour method, you can embed all kinds of little treasures, like flowers, shells, and more, creating unique and personalized designs. Let your creativity flow with endless possibilities!

We also have molds available for other tealight candle holders, as seen in one of the pictures (for illustrative purposes, this item is only for the Twin tealight candle holder mold).

Silicone mold for a set of 4 Holographic Oriental coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Oriental coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Oriental coaster holder and a large holographic Oriental tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Set of 2 silicone molds for 4 Cascade Round coasters with a matching large tray. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. The tray is 26.2 cm (10 1/3") wide and also 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Silicone mold for a Decorative Christmas ornament with a Snowflake. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Snowflake design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Snowflake mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone square inlay mold with a Holographic decorative lead glass 'Daisy bud' pattern. The mold is 18 x 18 cm (7" x 7") wide and 5 mm (1/5") thick. The 'Daisy bud' pattern is 0.75 mm deep.

This inlay mold will make a great combination together with our 20 x 20 cm (8" x 8") large tray molds of 1 cm (2/5") and 2 cm (4/5") thickness. Using the two molds together will create a tray with a raised edge of 5 mm (1/5").

There is also a larger normal version of this inaly mold available, without the holographic color effect. And we also have 8 mm (1/3") tray molds with this 'Daisy bud' pattern available, in a normal and in a holographic version.

Silicone mold for a set of four square coasters with an engraved Ocean theme. The  coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

There is also a matching coaster holder available, which holds 4 coasters, and a 25 cm (10") square  tray with the same Ocean theme, see one of the pictures (for illustration purposes, this item is only for the coaster mold).

The 3 molds are also in two different sets available (coasters with holder, coasters with holder and tray), for special setprices.

Note: do not apply too thick a dome layer on the legs of the holder, because then they will no longer fit through the slots.

The figures in these molds present themself also in 12 cute Christmas ornaments, for which we have a mold available separately.