Alle mallen

Silicone Inlay mold with a Crushed Ice pattern and a Wavy edge. The mold is 22.5 cm (9") wide and 2 - 5 mm (1/12" - 1/5") thick. The inlay mold can be used in any other silicone mold which is at least 8 mm (1/3") thick and it is a perfect match for our 25 cm (10") large Geode tray and plain round molds, see the pictures (for illustrative purposes, this item is only for the inlay mold).

There is also a 15.5 cm (6") version of this inlay mold available and both molds can also be purchased as a set.

Siliconen mal voor het Hamsa symbool. De Hamsa representeert de hand van Fatima en het symbool staat voor geluk maar ook voor steun en de deugden geduld en trouw. Het is ook een afweer tegen het boze oog, om deze reden zit er in het symbool een oog. Deze Hamsa is 16 x 19 cm en 8 mm dik. Deze Hamsa heeft een verhoogde rand, het kan onder andere als sieraden tray gebruikt worden.

We hebben dezelfde Hamsa, ook beschikbaar zonder verhoogde rand.

Silicone mold for a large Cascade Pebble tray. The tray is 20.5 cm (8") wide, 25 cm (10") high and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Pebble coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the Pebble tray mold). Both molds are also available as a set, at a special price.

Silicone mold for an Art panel, titled Squares and Circles. The panel is 20 x 20 cm (8"x 8") wide, 18 mm (7/10") thick and all elements in the panel have different heights.

Add an artistic touch to your interior with our 'Squares and Circles' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The elements in the panel form a symmetrical pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Squares and Circles' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a large Rectangular Geode-style tray with rough sides. The tray is about 18 x 31 cm (7" x 12") wide and 12 mm (1/2") thick.

This mold for a Rough & Tough Rectangular tray is designed for the creative mind that likes it a little rough on the sides and smooth on the surface! The mold can be used with Resin and Acrylic Resin (Jesmonite, Acrylic One, Jesin and other brands). Made to look like a real stone tray, it's a beautiful mix of stylish and strong - perfect for all of your creativity and decoration needs. 

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Three silicone molds for Druzy Crystal Christmas ornaments, one with a Christmas tree, one with a Christmas star and one with a Cristmas bell. Each ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.

The molds are also available separately.

Silicone mold for 2 large Christmas Angels. Each Angel is 20 cm (8") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 15 cm (6"). Some of them are also available in a Druzy crystal version.

Silicone mold for a large 'Merry Christmas' tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for a deep round disc. The disc is 17 cm (6 2/3") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

The disc mold is suitable for deep pour projects, like flower preservation. We also have a deep pour round mold available in 12 cm (4 3/4"), 22 cm (8 2/3") and in 27 cm (10 2/3").

Silicone mold for a coaster holder with ribbed edge. The holder can hold 4 coasters that are 10 cm (4") wide and 8 mm (1/3") thick and it is specifically designed for our round coasters with ribbed edges, but other round coasters of maximum 10 cm wide will fit too.

The legs of the holder are 40 mm (1 3/5") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Silicone mold for a Business Card holder with a Holographic Broken Glass pattern. The holographic color effect will transfer to the surface of your resin card holder. The holder is 5 mm (1/5") thick and 70 mm (2 3/4") wide, suitable for landscape Business Cards (European and American dimensions).

The same design is also available in a smooth version, without pattern.

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

Silicone mold for a set of eight Hexagon (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the Hexagon (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring. 

This medallion mold is part of our line of Hexagon molds, in which besides this mold are also two hexagon trays, a set of four hexagon coasters and a matching coaster holder, as shown in one of the pictures (for illustrative purposes, this item is only for the hexagon medallions mold).

The hexagon medallion mold is also in a holographic version available, for spectacular color effects on the surface of your resin medallions!

Silicone mold for a set of eight decorative (napkin ring) medallions, engraved with the Peacock Mandala. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring. 

This medallion mold is part of our 'Peacock Mandala' design line, in which besides this mold are also three cake stand molds (with a center hole), a set of four coasters and a coaster holder.

Silicone mold for 12 Hearts! Each heart is 8 cm (3 1/6") wide, 7.5 cm (3/10") high and 8 mm (1/3") thick.

Spread the love with a Dozen Hearts! Show your beloved wedding guests your appreciation with a unique gift and create lasting memories on your special day. These hearts will spread love and joy throughout your celebration (overload of love not guaranteed but highly probable!) They are also a perfect addition for any wedding table, garden party or mothers Day.

Silicone mold for 7 Halloween Pumpkin keychains. The pumpkins are 6 mm (1/4") thick, 5.7 cm (2 1/4") wide and 6 cm (2 1/3") tall. Each pumpkin has its own engraved facial expression. 

There are 2 other versions of the pumpkins available, a 'holographic Halloween' version with engraved faces (the holographic color effect will transfer to the surface of your resin pumpkin keychains) and a 'plain' version, without engraved faces and without a holographic color effect. 

One of the pictures shows all 3 molds (for illustrative purposes, this item is only for the 'Halloween' pumpkin mold).

Silicone mold for a large Holographic Heart shaped tray. The tray is 30 cm (12") wide, 27.8 cm (11")  tall and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

This same large tray mold is also available in a regular version, without the holographic color effect.

Silicone mold for a set of eight decorative Easter medallions, engraved with Little Thumper and decorative eggs. Each medallion is 5.5 cm (2 1/6") tall, 4.4 cm (1 3/4") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on these medallions, he also appears on molds for a set of 4 coasters, a matching coaster holder, an egg holder, a large tray, a flower arranger and a tealight candle holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a large Tablet stand with a Holographic Broken Glass pattern. The holographic color effect will transfer to the surface of your tablet stand.

The stand is suitable for all tablets, small and large. It is 6 mm (1/4") thick and the frontplate above the edge is 22.5 cm (11") wide and 16.5 cm (6 2/5") high.

The same design is also available in a smooth version, without pattern.