Alle mallen

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a holographic version available.

Set of 2 Holographic silicone molds for 4 Geode coasters and a matching holder. The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for these coasters and both molds have a holographic color effect, which  will transfer to the surface of your resin coasters.

The molds are also available separately.

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Slicone mold for a Holographic telephone stand. We call this specific effect 'Crazy Holo' and the holographic color effect will transfer to the surface of your resin telephone stand.

The stand is 6 mm ( 1/4") thick and the space above the edge is 80 mm (3 3/5") wide and 130 mm (5 1/10") high.

The same design is also available in a regular version, without holographic effect.

Silicone mold for a large Tablet stand with a Holographic Broken Glass pattern. The holographic color effect will transfer to the surface of your tablet stand.

The stand is suitable for all tablets, small and large. It is 6 mm (1/4") thick and the frontplate above the edge is 22.5 cm (11") wide and 16.5 cm (6 2/5") high.

The same design is also available in a smooth version, without pattern.

Silicone mold for a holder for 4 round Geode coasters, that are maximum 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for our Round Geode Coasters.

This item is only for the coaster holder mold, but both the holder and matching coaster mold are as a set available, for a special setprice.

A set with this holder mold, the coaster mold and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the holder mold).

You insert the legs from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The Geode coaster holder mold is also in a holographic version available, for spectacular color effects on the surface of your resin coasters!

Two silicone molds for:

• 28 Domino stones. These are special stones because the dots are hexagon shaped and the surface of the stones is uneven, which gives each stone a unique look! The stones are 24 mm x 50 mm (appr. 1" x 2") and about 6 mm (1/4") thick.
• a tray to store the 28 Domino stones, to better prevent them from getting lost. The dimensions of the tray are 21 cm x 25 cm (8 1/3" x 10") and it is in total 1 cm (2/5") thick. The tray has two layers, one for the decorative border, which is 6 mm (1/4") thick and a second layer of 4 mm (1/6") for the baseplate. The baseplate has a decorative pattern engraved into it.

Silicone mold for 3 medium size Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 15 cm (6") high and 8 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 8 cm (3 1/6") to 30 cm (12").

Silicone mold for a Wall hanging, decorated with Santa, flying through the sky with his Reindeers. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with beautiful wrapped Christmas gifts.

Silicone mold for a set of four Cascade Roman coasters. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Roman tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for a set of four Cascade Hexagon coasters. The coasters are from side to side 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Hexagon tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for a large 'Oriental' tray. The tray is 25.5 cm (10") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, 2 smaller trays, a larger tray and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the large tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a Square tray of 30 x 30 cm (12" x 12") wide and 1 cm (2/5") thick.

We also have a square mold available in 20 x 20 cm (8" x 8") and 25 x 25 cm (10" x 10").

Set of two silicone molds for our trays with the Magical theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder, 2 larger trays and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a medium sized 'Magical' tray. The tray is 20 cm (8") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, one smaller tray, 2 larger trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the medium sized tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

Silicone mold for a holder for four Hexagon coasters which are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This holder mold is part of our line of Hexagon molds, in which besides this mold are also molds for matching coasters, two hexagon trays, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There are two special prized hexagon sets of 3 molds available with this holder mold, one set with the hexagon coasters and the medium sized hexagon tray and one set with the hexagon coasters and the large hexagon tray.

The holder mold is also in a holographic version available, for spectacular color effects on the surface of your resin coaster holder, especially when combined with the holographic Hexagon coasters.

Silicone Inlay mold with a Crushed Ice pattern and a Wavy edge. The mold is 22.5 cm (9") wide and 2 - 5 mm (1/12" - 1/5") thick. The inlay mold can be used in any other silicone mold which is at least 8 mm (1/3") thick and it is a perfect match for our 25 cm (10") large Geode tray and plain round molds, see the pictures (for illustrative purposes, this item is only for the inlay mold).

There is also a 15.5 cm (6") version of this inlay mold available and both molds can also be purchased as a set.

Siliconen mal voor het Hamsa symbool. De Hamsa representeert de hand van Fatima en het symbool staat voor geluk maar ook voor steun en de deugden geduld en trouw. Het is ook een afweer tegen het boze oog, om deze reden zit er in het symbool een oog. Deze Hamsa is 16 x 19 cm en 8 mm dik. Deze Hamsa heeft een verhoogde rand, het kan onder andere als sieraden tray gebruikt worden.

We hebben dezelfde Hamsa, ook beschikbaar zonder verhoogde rand.