All molds

Silicone mold for 9 Cute Halloween Keychain Ornaments. The ornaments are appr. 5 cm (2") wide and 6 cm ( 1/4") high. They are 6 mm (1/4") thick.

A charming set of nine matching Halloween ornaments, each with its own playful engraved design. The coordinated shapes give the collection a beautifully consistent look, while the cat, haunted house, witch’s hat, pumpkin, ghost and other spooky details keep every piece unique. Have fun combining colours, glitter, glow-in-the-dark pigments and layered effects.

Perfect for keychains, bag charms, hanging decorations or a coordinated set of handmade Halloween gifts.

Silicone mold for a large Christmas Bauble with a Decorative Ribbon. The bauble is 20 cm (8") wide, 27.5 cm (10 4/5") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 10 cm (4") and 15 cm (6") wide, see the attached picture (for illustrative purposes, this item is only for the large Bauble mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a large Christmas Ornament, featuring a friendly Gnome. The Gnome is 22.5 cm (8 4/5") high and 8 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 8 cm (3 1/6") to 30 cm (12").

Silicone mold for 2 medium size Christmas Ornaments with a Gingerbread House. Each house is 13.5 cm (5 1/4") high, 15 cm (6") wide and 8 mm (1/3") thick.

We also have 4 other molds with the same Gingerbread House available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for 2 medium size Christmas Ornaments with a Happy Santa Claus. Santa is 15 cm (6") high and 8 mm (1/3") thick.

We also have 4 other Happy Santa molds available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a Ribbed Tealight Candle Holder. The candle holder is 7.5 cm (3") wide and 7.5 cm (3") high.

Create a stunning tealight holder with this beautifully ribbed design! With its slightly oval shape, flat top and bottom, and elegant vertical ridges, this mold is perfect for stylish home décor. The matte finish makes it ideal for Jesmonite and other non-glossy casting materials, giving your creations a refined, modern look.

ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tealight candle holder, it will have a matte finish.

We also have molds available for other tealight candle holders, as seen in one of the pictures (for illustrative purposes, this item is only for the Ribbed tealight candle holder mold).

Two silicone molds for:

• a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick.
• a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Four silicone inlay molds for Square coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") square coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other square inlay molds available with a different pattern, see one of the pictures. 

And this 'Mikado' pattern is also available for round and hexagon coasters, see one of the pictures (for illustrative purposes, this item is only for the square inlay molds).

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #3).

Set of 2 silicone molds for:

• a Baby Cloud. The cloud is 30.5 cm (12") wide, 23 cm (9") high and 8 mm (1/3") thick.
• 15 Baby Cloud ornaments. The ornaments come in different sizes, and several feature two holes, allowing you to link multiple ornaments together. Each ornament is 6 mm (1/4") thick.
  

This complete mold set combines our Baby Cloud with 15 matching hanging ornaments. Personalise the cloud with a name or birth details, then complete the design with your favourite combination of hearts, stars, clouds, raindrops and other sweet shapes. Experiment with soft colours, glitter, dried flowers or coordinated effects to create a truly unique baby keepsake. Perfect as nursery décor, a baby shower gift or a treasured reminder of a very special arrival.

Set of 2 silicone molds for:

• four Poppy-shaped Coasters. The coasters are 12 cm (4 3/4") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick.
• a large Poppy-shaped Flower Tray. The tray is 25 cm (10") wide, 18.5 cm (7 1/4") high and 8 mm (1/3") thick.

The petals of the Poppies are delicately engraved.

Double the Poppy Power, double the fun! This beautiful matching set is perfect for creating a coordinated look for your table, gift set, or resin art collection. Whether you go full floral or mix and match colors and styles, this duo is made for creative freedom. And the best part? You’ll save with our special set price! Let your ideas bloom and create your own wildflower wonderland.

We also have two other Poppy molds available, one for a medium size tray and one for 9 Poppy ornaments with keychain holes.

Silicone mold for a medium size Christmas Bauble with a Decorative Ribbon. The bauble is 15 cm (6") wide, 20.5 cm (8") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 10 cm (4") and 20 cm (8") wide, see the attached picture (for illustrative purposes, this item is only for the medium size Bauble mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for an Art panel, titled Diagonal Tubes. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 19 mm (3/4") thick. 

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We also have another, similar, Tubes mold avalable, but then with parallel tubes. both molds are also available as a set, for a special setprice.

Silicone mold for a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Crafted with a creative and unique design resembling wild water, the oval tray that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art that resembles rough seas. An adventure for your imagination!

Set of two silicone molds for our trays with the Oriental theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, a smaller tray, a larger tray and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a large Halloween tray, featuring a Spiderweb, with a huge Spider crawling around!

The tray is 30 cm (12") wide and 8 mm (1/3") thick. The Big Web is 0.75 mm thick and it will be raised on the surface of the tray.

There is also a mold available for 4 Spiderweb coasters and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb tray mold).

Silicone mold for a small 'Magical' tray. The tray is 15 cm (6") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 larger trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the small tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for two Intertwined Hearts. The hearts are 6 mm (1/4) thick and together they are 26.5 cm (10 2/5") wide and 19.5 cm (7 2/3") tall.

This mold is also available in a Holographic version.

Silicone mold for a large Cute Christmas tray. The tray is 30 cm (12") wide and 8 mm (1/3") thick.

The tray features the same Christmas figures as in the cute Christmas coasters, coaster holder and in the mold for 12 cute Christmas ornaments.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for a large tray with the Lily Mandala engraved into it. The tray is 25 cm (10") wide and 8 mm (1/3") thick.

This mold is part of our Lily Mandala line, which also includes a set of 4 coasters, a coaster holder, an XL Lily tray and a set of 8 medallions, as shown in one of the pictures (for illustrative purposes, this item is only for the large tray mold).

Silicone mold for a set of four coasters, engraved with the Lily Mandala. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This holder mold is part of our Lily Mandala line, which also includes a coaster holder, a set of 8 medallions, a tray of 25 cm (10") and an XL tray of 35.5 cm (14"), as shown in one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The coaster mold and holder mold are also as a set available, for a special setprice.

Silicone mold for an extra large Geode tray with Crushed Ice effect. The tray is 35 cm wide (14") and has a raised edge.

There is also a mold for an identical smaller tray, which is 25 cm wide (10"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the XL tray mold).