All molds

Set of two silicone molds for four irregular shaped Geode coasters and a matching holder. The Coasters are approx. 12.5 cm (5") wide and 15 mm (3/5") thick. The holder is 12 mm (1/2") thick.

Cure your thirst for something original with this set of 2 molds! The thick Geode coasters mold has an irregular shape and it comes with a holder mold, making it a unique set. Your guests won't be able to resist the 'rock'ing atmosphere! ;)

The molds are also available separately.

Silicone mold for a small 'Magical' tray. The tray is 15 cm (6") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 larger trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the small tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a set of eight medallions, in the shape of a pair of Christmas Bells. There are also Christmas bells engraved into them. Each medallion is 5.5 cm (2 1/6") wide, 4.7 cm (1 4/5") high and 8 mm (about 1/3") thick.

Silicone mold for a set of four round Cute Christmas coasters. The coasters are 10 cm ( 4") wide, 8 mm (1/3") thick and they are engraved with a bunch of cute Christmas figures. 

There is also a mold available for a matching holder and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The figures in the coasters present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for an Easter Tealight Candle holder, featuring Little Thumper with his brothers and sisters! The candle holder is 16 cm (6 3/10") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on this candle holder, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a large Christmas Ornament with a Gingerbread House. The house is 18 cm (7") high, 20 cm (8") wide and 8 mm (1/3") thick.

We also have 4 other molds with the same Gingerbread House available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a larg Christmas Ornament with a Happy Santa Claus. Santa is 20 cm (8") high and 8 mm (1/3") thick.

We also have 4 other Happy Santa molds available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for Twin Tealight Candle Holders. The two identical candle holders are each 6 cm ( 2 1/3") wide and 4.5 cm (1 3/4") high.

This mold for two small, yet deep, round tealight candle holders is perfect for your next project. With the deep pour method, you can embed all kinds of little treasures, like flowers, shells, and more, creating unique and personalized designs. Let your creativity flow with endless possibilities!

We also have molds available for other tealight candle holders, as seen in one of the pictures (for illustrative purposes, this item is only for the Twin tealight candle holder mold).

Set of 2 silicone molds for 4 Cascade Round coasters with a matching large tray. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. The tray is 26.2 cm (10 1/3") wide and also 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Silicone mold for a Decorative Christmas ornament with a Snowflake. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Snowflake design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Snowflake mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone square inlay mold with a Holographic decorative lead glass 'Daisy bud' pattern. The mold is 18 x 18 cm (7" x 7") wide and 5 mm (1/5") thick. The 'Daisy bud' pattern is 0.75 mm deep.

This inlay mold will make a great combination together with our 20 x 20 cm (8" x 8") large tray molds of 1 cm (2/5") and 2 cm (4/5") thickness. Using the two molds together will create a tray with a raised edge of 5 mm (1/5").

There is also a larger normal version of this inaly mold available, without the holographic color effect. And we also have 8 mm (1/3") tray molds with this 'Daisy bud' pattern available, in a normal and in a holographic version.

Note: do not apply too thick a dome layer on the legs of the holder, because then they will no longer fit through the slots.

The figures in these molds present themself also in 12 cute Christmas ornaments, for which we have a mold available separately.

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

And this 'Mikado' pattern is also available for round and square coasters, see one of the pictures (for illustrative purposes, this item is only for the hexagon inlay molds).

Silicone mold for a large Geode tray with Crushed Ice effect. The tray is 25 cm wide (10") and has a raised edge.

There is also a mold for an identical larger tray, which is 35 cm wide (14"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the large tray mold).

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #2).

Silicone mold for a medium size Christmas Bauble with a Decorative Ribbon. The bauble is 15 cm (6") wide, 20.5 cm (8") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 10 cm (4") and 20 cm (8") wide, see the attached picture (for illustrative purposes, this item is only for the medium size Bauble mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a set of 4 Holographic Oriental coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Oriental coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Oriental coaster holder and a large holographic Oriental tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a large Cascade Hexagon tray. The tray is from side to side 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Hexagon coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a thick square block. The block is 20 x 20 cm (8" x 8") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

This square mold is suitable for deep pour projects, like flower preservation. We also have a deep pour square mold available in 15 x 15 cm (6" x 6") and in 25 x 25 cm (10" x 10").

Two silicone molds for:

• 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.
• a holder for these oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide, the baseplate is 8 mm (1/3") thick and it is engraved with thin graceful lines. You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the supports, because then they will no longer fit through the slots.

There are also molds available for two oval trays with the same graceful line pattern.

These two molds are together with the large oval tray 'Graceful lines' also as a set of 3 molds available, for a special setprice.