Alle mallen

Silicone mold for 26 letter medallions. The medallions are flower shaped, they have a decorative engraving and each letter has an engraved border, which makes it pop out beautifully. The medallions are 5 cm (2") wide, 6 mm (1/4") thick and you can for instance make personalized phone grips, fridge magnets, napkin medallions, keyring tags and holiday decorations with them.

As a bonus we added the same engraved flower in the center of the mold, it is about 11 cm (4 1/3") large.

There is also a similar mold available that is holographic and has keyring holes in the medallions. 

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #1).

Set of 5 silicone inlay molds with the Crushed Ice pattern. The 'Island' mold is 15.5 x 21 cm (6" x 8 1/4") at the widest parts and the round inlay molds are 8 cm (3 1/6").

All molds are about 4 mm (1/6") thick and the round molds will fit in (almost) any coaster mold.

Create a personalised nursery keepsake with this handmade set of 2 silicone molds, combining our Baby Cloud with 15 matching hanging ornaments. The set includes a large cloud featuring the engraved words “Hello Little One”, together with delicate stars and clouds, plus a collection of sweet coordinating ornaments such as hearts, stars, clouds, raindrops and other charming baby-themed shapes.

Personalise the cloud with a baby’s name, birth details or a special message, then complete the design with your favourite combination of hanging ornaments. Several ornaments feature two holes, allowing you to link multiple pieces together and create a layered, flowing arrangement beneath the cloud.

This Baby Cloud mold set is perfect for experimenting with soft colours, glitter, dried flowers, pearlescent pigments and coordinated decorative effects to create a truly unique baby keepsake. The finished piece makes a beautiful choice for nursery décor, a baby shower gift, a newborn keepsake or a personalised handmade gift for a special new arrival.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Photo & creation: Sabine Löffler – PouringArtShop

Silicone mold for a large Cascade Round tray. The tray is 26.2 cm (10 1/3") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a round coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the round tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a decorative Halloween shield with a Tombstone Zombie! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Get ready to spookify your house with a scary Halloween shield, created by yourself! This unique shield will turn your frontdoor or porch into a spooky entrance with its tombstone and zombie design. Trick-or-treaters beware!

We also have 3 other molds available for a Halloween shield, all with their own decorative design.

Two silicone molds for:

• a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick.
• a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Silicone mold for a large round tray with a 'Wild Water' effect on the surface. The tray is 30 cm (11 4/5") wide and 9 mm (1/3") thick.

We also have a mold available for a smaller 'Wild Water' tray, which is 19 cm (7 1/2") wide.

Crafted with a creative and unique design resembling wild water, the large tray that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art that resembles rough seas. An adventure for your imagination!

Silicone mold for a large Pumpkin tray. The tray is 28 cm (11") wide, 27 cm (10 2/3") tall and 8 mm (1/3") thick.

There is also a mold available for 4 Pumpkin coasters and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin tray mold).

Set of two silicone molds for our trays with the Magical theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, a smaller tray, a larger tray and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a set of eight decorative (napkin ring) medallions, with our Magical shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a Holographic holder for 4 (holographic) Fantasy coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Fantasy coasters, see one of the pictures (for illustrative purposes, this item is only for the holographic holder mold). Both holographic molds are also as a set of 2 molds available, for a special setprice.

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Holographic Tealight Candle Holder with the AUM (OHM/OM) symbol. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The symbol is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration, see the pictures. A few of them are pictured in their finished state.

Silicone mold for an XL round Trinket Dish. The Trinket Dish has a diameter of 28 cm (11") and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are also molds for two smaller round Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the XL round Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Siliocone mold for an XL round disc with ribbed edge. The disc is 35.5 cm (14") wide and  8 mm (1/3") thick.

There are also molds available for two smaller ribbed edge trays (15 cm and 25 cm) and for ribbed edge coasters and matching coaster holder, see one of the pictures (for illustrative purposes, this item is only for the 35.5 cm disc mold). Some of these molds are also in a set available, for a special setprice.

Silicone mold for a small 'Magical' tray. The tray is 15 cm (6") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 larger trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the small tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Two silicone molds for:

• a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide. 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.
• a mold that can be used to make a holder for the coasters and also a small Heart shaped tray. The heart is 18 cm (7") wide, 17 cm (6 3/4") tall and 8 mm (1/3") thick.
  The two small hearts are meant to be used as stands on the tray, to create a holder for the heart shaped coasters and they can for instance be fixed with glue, resin or in a toplayer.

There is also a mold available for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the coaster mold with holder / small tray mold).

Silicone mold for an extra large rectangular Geode inlay mold. This is a special inlay mold because it has a center with a crystal structure, which is surrounded by a Crushed Ice structure. The inlay mold is 23 cm (9") x 31 cm (12 1/5") and about 4 mm thick. 

The inlay mold is pretty large and therefore a great combination with our mold for an extra large Rectangular Geode Tray.