All molds

Silicone mold for a large Oval tray. The tray has the shape of an egg and it is 25,5 cm (10") tall and 8 mm (1/3") thick.

 The tray is also part of our Easter collection, with molds for smaller decorations, large engraved oval trays and more (to come).

Silicone mold for a large oval tray, engraved with wild flowers. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the daisies tray and the narcissus tray, see one of the pictures (for illustrative purposes, this item is only for the wild flowers mold).

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #4).

Two silicone molds for a medium sized 2-tier cake stand, engraved with the Peacock Mandala. The cake stands are 18 cm (7") and 24 cm (9 2/5") wide and 8 mm (1/3") thick. The centers have a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The molds are part of our 'Peacock Mandala' design line, in which besides these molds are also a larger cake stand (to make a 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

Silicone mold for an extra large Mandala tray with the AUM symbol engraved into it. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick. The symbol is well known to those who practise Yoga.

"AUM is not just a sound or vibration. It is not just a symbol. It is the entire cosmos, whatever we can see, touch, hear and feel. Moreover, it is all that is within our perception and all that is beyond our perception. It is the core of our very existence. If you think of AUM only as a sound, a technique or a symbol of the Divine, you will miss it altogether. AUM is the mysterious cosmic energy that is the substratum of all the things and all the beings of the entire universe. It is an eternal song of the Divine. It is continuously resounding in silence on the background of everything that exists."

― Amit Ray

3 Silicone molds for Halloween Bat Hangers: 

• a small Bat Hanger, which is 20 cm (8") wide and 8 cm (3 1/4") high.
• a medium size Bat Hanger, which is 25 cm (10") wide and10 cm (4") high.
• a large Bat Hanger, which is 35 cm (12") wide and 12.5 cm (5") high.

The bats are 8 mm (1/3") thick and they have a raised decorative pattern, which is 1 mm thick.

The three molds are also available separately.

Three silicone molds for Christmas Baubles with a decorative ribbon:

• Two baubles of 10 cm (4") wide and 13.5 cm (5 1/3") high.
• One bauble of 15 cm (6") wide and 20.5 cm (8") high.
• One bauble of 20 cm (8") wide and 27.5 (10 4/5") high.

Each bauble is 8 mm (1/3") thick and the molds are also available separately.

Silicone mold for an XL Teapot tray. The teapot is 35.5 cm (14") wide, 25.4 cm (10") high and 8 mm (1/3") thick.

"Pour yourself some creativity with our XL Teapot Mold! 🍵

At a generous 35.5 cm wide, this teapot mold is perfect for those who love to go big with their crafting projects, and the large elegant design allows you to make a stunning decor piece, for instance for your dinner table.

Want to create a full tea set? Pair it with our teacup tray molds (large and XL) or even our teacup coasters mold for a charming collection (cup molds are available separately). The possibilities are as endless as your imagination!"

Silicone mold for an XL Cup tray. The tray is 35.5 cm (14") wide, 25.5 cm (10") high and 8 mm (1/3") thick.

There are also molds available for a smaller Cup tray,  which is 25 cm (10") wide, and for a set of 4 Cup coasters, see one of the pictures (for illustrative purposes, this item is only for the XL Cup tray mold).

Silicone mold for a Tube tray. The tray is 12.5 x 25 cm (5" x 10") wide and 1 cm (2/5") thick. The tray has a flat bottom and the top consists of 5 adjacent tubes.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish, as shown in the pictures.

We also have a mold available for 2 matching Tube coasters, see one of the pictures (for illustrative purposes, this item is only for the Tube tray mold). Both molds are also available as a set, for a special setprice.

Set of three silicone molds for our trays with the Oriental theme. The trays are 15 cm (6"), 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These three molds are part of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, an XL tray and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Set of two silicone molds for our trays with the Oriental theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder, 2 larger trays and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Two silicone molds for:

• 4 Oval coasters. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.
• a holder for these oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide and 8 mm (1/3") thick. You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the supports, because then they will no longer fit through the slots.

This silicone mold can be used to make a holder for our Heart shaped coasters (which mold is available separately) and also a small Heart shaped tray. The heart is 18 cm (7") wide, 17 cm (6 3/4") tall and 8 mm (1/3") thick.

The two small hearts are meant to be used as stands on the tray, to create a holder for the heart shaped coasters and they can for instance be fixed with glue, resin or in a toplayer.

There are also molds available for a set of 4 heart shaped coasters and for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the holder / small tray mold). 

We also combined the 3 molds in 2 different available sets, for special setprices.

Silicone mold for a set of eight (napkin ring) medallions, with a decorative 'Merry Christmas' engraving. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

We have several other molds available with the same 'Merry Christmas' engraving, see one of the pictures (for illustrative purposes, this item is only for the medallion mold) and these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for 6 Christmas Bell ornaments, with holes for a ribbon or cord. Each bell is 10 cm (4") wide and high and they are 6 mm (1/4") thick.

The same bells are also available in a mold with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Silicone mold for a Square Tealight Candle Holder. The candle holder is 7.5 x 7.5 cm (3" x 3") and 4.6 cm (1 4/5") high. The cupsize is 58 mm (2 1/4")!

Because of the height and shape of the mold, it's very suitable for pouring flowers, for example.

You can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.

We also have 'deep-pour' molds available for other tealight candle holders, as seen in some of the pictures (for illustrative purposes, this item is only for the Square tealight candle holder mold).

Two silicone molds for:

• a set of four square coasters with a raised edge and a 'Tetris' pattern. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

• a matching holder, which holds 4 coasters of maximum 8 mm (1/3") thick. You can fix the supports with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

  Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The coaster mold and the holder mold are also separately available.

Silicone mold for a set of eight decorative (napkin ring) medallions, shaped as a Daisy flower. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).

Four silicone inlay molds for Square coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") square coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other square inlay molds available with a different pattern, see one of the pictures.