Alle Formen

Silicone mold for a large Rectangular Geode-style tray with rough sides. The tray is about 18 x 31 cm (7" x 12") wide and 12 mm (1/2") thick.

This mold for a Rough & Tough Rectangular tray is designed for the creative mind that likes it a little rough on the sides and smooth on the surface! The mold can be used with Resin and Acrylic Resin (Jesmonite, Acrylic One, Jesin and other brands). Made to look like a real stone tray, it's a beautiful mix of stylish and strong - perfect for all of your creativity and decoration needs. 

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for a large 'Merry Christmas' tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a holographic version available.

Silicone mold for a thick square block. The block is 15 x 15 cm (6" x 6") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

This square mold is suitable for deep pour projects, like flower preservation. We also have a deep pour square mold available in 20 x 20 cm (8" x 8") and in 25 x 25 cm (10" x 10").

Set of 2 Holographic silicone molds for 4 Geode coasters and a matching holder. The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for these coasters and both molds have a holographic color effect, which  will transfer to the surface of your resin coasters.

The molds are also available separately.

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Slicone mold for a Holographic telephone stand. We call this specific effect 'Crazy Holo' and the holographic color effect will transfer to the surface of your resin telephone stand.

The stand is 6 mm ( 1/4") thick and the space above the edge is 80 mm (3 3/5") wide and 130 mm (5 1/10") high.

The same design is also available in a regular version, without holographic effect.

Create a playful Halloween collection with this Cute Halloween Keychain Ornaments Silicone Mold.

This mold features ten charming Halloween characters, designed for a cute and cheerful seasonal look rather than a creepy one. From a smiling cauldron and little mummy to a black cat, bat and friendly ghost, every design has its own personality while still forming a beautifully coordinated set.

Experiment with bright colours, glitter, glow-in-the-dark pigments and layered effects to create your own unique Halloween style.

Perfect for keychains, bag charms, hanging ornaments or fun handmade Halloween gifts.

Silicone mold for a medium size Round Disc, with a diameter of 20 cm (8") and a thickness of 1 cm (2/5").

There are also molds available for a 15 cm (6"), a 25 cm (10") and a 35.5 cm (14") disc.

Silicone mold for a large Magical Potion Bottle, guarded by Ghosts and Bats. The bottle is 12.5 cm (5") wide, 25.5 cm (10") high and 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. 

A magical potion bottle, guarded by friendly ghosts and bats! This mold is perfect for creating your own unique Halloween decoration. Get ready to brew up something magical and add a spook-tacular touch to your home!

We also have molds available for three other large Magical Potion bottles.

Silicone mold for a Wall hanging, decorated with Santa, flying through the sky with his Reindeers. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with beautiful wrapped Christmas gifts.

Silicone mold for an Art panel, titled Squares and Circles. The panel is 20 x 20 cm (8"x 8") wide, 18 mm (7/10") thick and all elements in the panel have different heights.

Add an artistic touch to your interior with our 'Squares and Circles' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The elements in the panel form a symmetrical pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Squares and Circles' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Three silicone molds for a medium size, a large and an XL round Trinket Dish. The medium Trinket Dish has a diameter of 18 cm (7"), the large Trinket Dish 23 cm (9") and the XL Trinket Dish 28 cm (11").

The Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Silicone mold for a large 'Oriental' tray. The tray is 25.5 cm (10") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, 2 smaller trays, a larger tray and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the large tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a Square tray of 30 x 30 cm (12" x 12") wide and 1 cm (2/5") thick.

We also have a square mold available in 20 x 20 cm (8" x 8") and 25 x 25 cm (10" x 10").

Silicone mold for a Square tray of 25 x 25 cm (10" x 10") wide and 1 cm (2/5") thick.

We also have a square mold available in 20 x 20 cm (8" x 8") and 30 x 30 cm (12" x 12").

Silicone mold for a medium sized 'Magical' tray. The tray is 20 cm (8") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, one smaller tray, 2 larger trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the medium sized tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a large Tablet stand with a Holographic Broken Glass pattern. The holographic color effect will transfer to the surface of your tablet stand.

The stand is suitable for all tablets, small and large. It is 6 mm (1/4") thick and the frontplate above the edge is 22.5 cm (11") wide and 16.5 cm (6 2/5") high.

The same design is also available in a smooth version, without pattern.

Silicone mold for a holder for 4 round Geode coasters, that are maximum 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for our Round Geode Coasters.

This item is only for the coaster holder mold, but both the holder and matching coaster mold are as a set available, for a special setprice.

A set with this holder mold, the coaster mold and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the holder mold).

You insert the legs from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The Geode coaster holder mold is also in a holographic version available, for spectacular color effects on the surface of your resin coasters!