Alle Formen

Silicone mold for 10 Elegant Christmas Baubles. The smallest bauble is 6.5 cm (2 3/5") wide, the tallest bauble is 13 cm (5 1/8") tall. Each bauble is 6 mm (1/4") thick.

This set of ten elegant Christmas baubles gives you a beautiful blank canvas for your festive ideas. Their smooth surfaces are perfect for experimenting with layered colours, glitter, alcohol inks, dried flowers or personalised details. Use them to create stylish tree decorations, unique gift tags or handmade keepsakes.

Ten different shapes, endless ways to make Christmas completely your own!

Silicone mold for a decorative Halloween shield with a Mystical Witch! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Use this mold to create and decorate your interior or frontdoor with a Halloween shield, featuring a Mystical Witch, a scary cat and some huge bats! Perfect for adding a bit of spooky fun to your Halloween decor. Get ready to scare (in a cute way) with a unique homemade decoration shield.

We also have 3 other molds available for a Halloween shield, all with their own decorative design.

Silicone mold for a large Magical Potion Bottle, guarded by Ghosts and Bats. The bottle is 12.5 cm (5") wide, 25.5 cm (10") high and 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. 

A magical potion bottle, guarded by friendly ghosts and bats! This mold is perfect for creating your own unique Halloween decoration. Get ready to brew up something magical and add a spook-tacular touch to your home!

We also have molds available for three other large Magical Potion bottles.

Silicone mold for two thick Rocky coasters. The coasters are appr. 12.5 cm (5") wide and 2 cm (4/5") thick. The flat surface at the top is appr. 8 cm (3 1/6") wide.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in one of the pictures.

Three silicone molds for a medium size, a large and an XL round Trinket Dish. The medium Trinket Dish has a diameter of 18 cm (7"), the large Trinket Dish 23 cm (9") and the XL Trinket Dish 28 cm (11").

The Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Set of 2 silicone molds for 4 Cascade Hexagon coasters with a matching large tray. The coasters are from side to side 11 cm (4 1/3") wide and 9 mm (1/3") thick. The tray is from side to side 25 cm (10") wide and also 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Silicone mold for a thick square block. The block is 15 x 15 cm (6" x 6") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

This square mold is suitable for deep pour projects, like flower preservation. We also have a deep pour square mold available in 20 x 20 cm (8" x 8") and in 25 x 25 cm (10" x 10").

Silicone mold for a set of eight Holographic Hexagon (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick. 

These medallions are the same as our normal hexagon medallions, but then with a Holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the Hexagon (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a Tealight Candle Holder with Druzy crystal squares. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Silicone mold for a Business Card holder with a Holographic Broken Glass pattern. The holographic color effect will transfer to the surface of your resin card holder. The holder is 5 mm (1/5") thick and 70 mm (2 3/4") wide, suitable for landscape Business Cards (European and American dimensions).

The same design is also available in a smooth version, without pattern.

Silicone mold for 6 small Christmas Ornaments with a Gingerbread House. Each house is 10 cm (4") high and 6 mm (1/4") thick.

We also have 4 other molds with the same Gingerbread House available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a set of four Cascade Round coasters. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a large round tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Two silicone molds for:

• a set of four round coasters with a 'Wild Water' effect on the surface. The coasters are 11.5 cm (4 1/2") wide and 9 mm (1/3") thick. 
• a large round tray with a 'Wild Water' effect on the surface. The tray is 30 cm (11 4/5") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Silicone mold for a large heart that is perforated with 66 holes, evenly spaced along the edge of the heart. The heart is 25 cm (10") wide, 23 cm (9") high and 8 mm (1/3") thick.

Make your Love craft projects extra special with this perforated heart. It features 66 holes around the edge, perfect for all your fabric, ribbon, wicker and crochet projects. Unleash your imagination, see what surprises you discover and bring the love into your home decor with this perforated heart!

Silicone mold for a large Scallop tray. The tray is 25 cm (10") x 22.5 cm (9") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray, an XL tray and for medallions, see one of the pictures (for illustrative purposes, this item is only for the large tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and this large tray), for special setprices.

Two silicone molds for:

• a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.
• a mold that can be used to make a holder for the Scallop coasters and also a small Scallop tray. The scallop is 16.5 cm (6.5") x 14.5 cm (5 2/3") and 8 mm (1/3") thick .
  The two small scallops are meant to be used as stands on the tray, to create a holder for the scallop coasters and they can for instance be fixed with glue, resin or in a toplayer.

There are also Scallop molds available for 2 larger trays and for medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster mold with holder / small tray mold).

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

And this 'Mikado' pattern is also available for square and hexagon coasters, see one of the pictures (for illustrative purposes, this item is only for the square inlay molds).

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.