XL Tabletts

Silicone mold for an extra large Geode tray with Crushed Ice effect. The tray is 35 cm wide (14") and has a raised edge.

There is also a mold for an identical smaller tray, which is 25 cm wide (10"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the XL tray mold).

Silicone mold for an XL Cup tray. The tray is 35.5 cm (14") wide, 25.5 cm (10") high and 8 mm (1/3") thick.

There are also molds available for a smaller Cup tray,  which is 25 cm (10") wide, and for a set of 4 Cup coasters, see one of the pictures (for illustrative purposes, this item is only for the XL Cup tray mold).

Silicone mold for an extra large 'Fantasy' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 3 smaller trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a large Hexagon tray. The tray is 31 cm (12 1/8") wide, measured from corner to opposite corner, and 8 mm (1/3") thick.

This tray mold is part of our line of Hexagon molds, in which besides this mold are also molds for a set of four coasters, a matching coaster holder, a smaller tray, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There is a special prized hexagon mold set available which has this tray, the mold for 4 hexagon coasters and the matching coaster holder, see one of the pictures.

Silicone mold for an extra large (XL) 'Magical' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for an extra large (XL) 'Oriental' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the XL tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for an Oval Slate tray. The tray is 30 cm x 22.5 cm (12" x 8 4/5") large and 8 mm (1/3") thick. The edge of the tray is coarsened, just like real slate, which makes the tray a perfect match with our slate coaster mold and coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

The tray has a smooth surface, the 'crushed ice' effect that is shown in the pictures, is made with some of our inlay molds, which are available separately.

Siliocone mold for a XL round disc of 35.5 cm (14") and 1 cm (2/5") thick. There are also molds for a 15 cm (6") and a 25 cm (10") disc available.

Silicone mold for a round Geode tray. The tray is 35 cm (14") wide and 10 mm (2/5") thick.

We have this tray design in 3 more sizes available, 15 cm (6"), 20 cm (8") and 25 cm (10").

A matching set of 4 coasters, the 'Round Geode Coasters (2021), is available as well.

Silicone mold for an extra large Mandala tray with the AUM symbol engraved into it. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick. The symbol is well known to those who practise Yoga.

"AUM is not just a sound or vibration. It is not just a symbol. It is the entire cosmos, whatever we can see, touch, hear and feel. Moreover, it is all that is within our perception and all that is beyond our perception. It is the core of our very existence. If you think of AUM only as a sound, a technique or a symbol of the Divine, you will miss it altogether. AUM is the mysterious cosmic energy that is the substratum of all the things and all the beings of the entire universe. It is an eternal song of the Divine. It is continuously resounding in silence on the background of everything that exists."

― Amit Ray

Silicone mold for an extra large tray with a Yin Yang symbol engraved into it. Two sunflowers form the symbol and it is the same Yin Yang as we used in the mold for the set of four Yin Yang Sunflower coasters. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick. 

The tray is also in a 10" (M) version available.

Silicone mold for an XL Scallop tray. The tray is 33 cm (13") x 28.5 cm (11") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray, a large tray and for medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and the large tray), for special setprices.

Silicone mold for a slim XL Trinket Dish. The Trinket Dish is 12.5 x 37.5 cm (5" x 15") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

We also have molds available for round and rectangular shaped Trinket Dishes, see some of the pictures (for illlustrative purposes, this item is only for the slim Trinket Dish).

Silicone mold for an XL Teapot tray. The teapot is 35.5 cm (14") wide, 25.4 cm (10") high and 8 mm (1/3") thick.

"Pour yourself some creativity with our XL Teapot Mold! 🍵

At a generous 35.5 cm wide, this teapot mold is perfect for those who love to go big with their crafting projects, and the large elegant design allows you to make a stunning decor piece, for instance for your dinner table.

Want to create a full tea set? Pair it with our teacup tray molds (large and XL) or even our teacup coasters mold for a charming collection (cup molds are available separately). The possibilities are as endless as your imagination!"

Silicone mold for an XL Trinket Dish. The Trinket Dish is 17.5 x 35 cm (7" x 14") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

There are also molds for two smaller Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the XL Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for a square XL tray with a rough tumbled marble look and feel. The tray is 30.5 x 30.5 cm (12" x 12") wide and 12.5 mm (1/2") thick.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish.

We also have a mold available for a 20 x 20 cm square tumbled marble tray and a mold for 4 square tumbled marble coasters, see one of the pictures (for illustrative purposes, this item is only for the XL tumbled marble tray mold).

Silicone mold for an XL Oval tray. The tray is 24 x 35 cm (9 2/5" x 13 3/4") and 1 cm (2/5") thick.

We also have a large oval tray available, see one of the pictures (for illustrative purposes, this item is only for the extra large oval tray mold).

This oval tray is also available with a 'Graceful lines' engraving.

Silicone mold for an XL Oval tray. The tray is 24 x 35 cm (9 2/5" x 13 3/4") wide, 1 cm (2/5") thick and it is engraved with thin graceful lines.

There are also molds available for matching coasters, a coaster holder and a smaller tray, all engraved with the same graceful line pattern.

This tray is also available in a plain version.

Siliocone mold for an XL round disc with ribbed edge. The disc is 35.5 cm (14") wide and  8 mm (1/3") thick.

There are also molds available for two smaller ribbed edge trays (15 cm and 25 cm) and for ribbed edge coasters and matching coaster holder, see one of the pictures (for illustrative purposes, this item is only for the 35.5 cm disc mold). Some of these molds are also in a set available, for a special setprice.