Wild Water and Ocean

Silicone mold for a medium size tray with a 'Wild Water' effect on the surface. The tray is 19 cm (7 1/2") wide and 9 mm (1/3") thick.

We also have a mold available for a larger 'Wild Water' tray, which is 30 cm (11 4/5") wide.

Crafted with a creative and unique design resembling wild water, the tray that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art that resembles rough seas. An adventure for your imagination!

Silicone mold for a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.

There are also Scallop molds available for a matching coaster holder / small tray, trays in different sizes and for medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Three silicone molds for:

• a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.
• a mold that can serve as a holder mold for the Scallop coasters and also as a small tray mold. The scallop is 16.5 cm (6.5") x 14.5 cm (5 2/3") and 8 mm (1/3") thick .
  The two small scallops are meant to be used as stands on the tray, to create a holder for the scallop coasters and they can for instance be fixed with glue, resin or in a toplayer.
• a large Scallop tray. The tray is 25 cm (10") x 22.5 cm (9") and 8 mm (1/3") thick.

There are also Scallop molds available for an XL tray and for medallions, see some of the pictures (for illustrative purposes, this item is only for the coaster mold with holder and large tray mold).

Silicone mold for a set of eight decorative Scallop medallions. Each medallion is 5.5 cm (2 1/6") x  4.8 cm (1 9/10") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray and two larger trays, see one of the pictures (for illustrative purposes, this item is only for the medallions mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a set of four round coasters with a 'Wild Water' effect on the surface. The coasters are 11.5 cm (4 1/2") wide and 9 mm (1/3") thick. 

Unleash your creativity with our 'Wild Water' round coasters! These unique coasters feature a rough texture that mimics the wild water effect, adding a bold touch to your drink serving experience.

Silicone mold for 9 round pendants with a keychain hole and a 'Wild Water' effect on the surface. The pendants are 6 cm (2 1/3") wide and 9 mmm (1/3") thick.

We also have molds available for 9 or 4 pendants with a smooth surface.

Two silicone molds for:

• a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.
• a mold that can be used to make a holder for the Scallop coasters and also a small Scallop tray. The scallop is 16.5 cm (6.5") x 14.5 cm (5 2/3") and 8 mm (1/3") thick .
  The two small scallops are meant to be used as stands on the tray, to create a holder for the scallop coasters and they can for instance be fixed with glue, resin or in a toplayer.

There are also Scallop molds available for 2 larger trays and for medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster mold with holder / small tray mold).

Two silicone molds for:

• a set of four round coasters with a 'Wild Water' effect on the surface. The coasters are 11.5 cm (4 1/2") wide and 9 mm (1/3") thick. 
• a large round tray with a 'Wild Water' effect on the surface. The tray is 30 cm (11 4/5") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Silicone mold for an XL Scallop tray. The tray is 33 cm (13") x 28.5 cm (11") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray, a large tray and for medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and the large tray), for special setprices.

Silicone mold for a large round tray with a 'Wild Water' effect on the surface. The tray is 30 cm (11 4/5") wide and 9 mm (1/3") thick.

We also have a mold available for a smaller 'Wild Water' tray, which is 19 cm (7 1/2") wide.

Crafted with a creative and unique design resembling wild water, the large tray that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art that resembles rough seas. An adventure for your imagination!

Silicone mold for a large Scallop tray. The tray is 25 cm (10") x 22.5 cm (9") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray, an XL tray and for medallions, see one of the pictures (for illustrative purposes, this item is only for the large tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and this large tray), for special setprices.

This silicone mold can be used to make a holder for our Scallop coasters (which mold is available separately) and also a small Scallop tray. The scallop is 16.5 cm (6.5") x 14.5 cm (5 2/3") and 8 mm (1/3") thick.

The two small scallops are meant to be used as stands on the tray, to create a holder for the scallop coasters and they can for instance be fixed with glue, resin or in a toplayer.

There are Scallop molds available for a set of 4 coasters, trays in different sizes and for medallions, see one of the pictures (for illustrative purposes, this item is only for the holder / small tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a medium size Scallop with a 'Wild Water' effect on the surface. The scallop is 24 x 20 cm (9 1/2" x 8") wide and 9 mm (1/3") thick.

Crafted with a creative and unique design resembling wild water, the  scallop that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art.

Two silicone molds for:

• a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick.
• a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Silicone mold for a set of four square coasters with an engraved Ocean theme. The  coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

There is also a matching coaster holder available, which holds 4 coasters, and a 25 cm (10") square  tray with the same Ocean theme, see one of the pictures (for illustration purposes, this item is only for the coaster mold).

The 3 molds are also in two different sets available (coasters with holder, coasters with holder and tray), for special setprices.

Silicone mold for a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Crafted with a creative and unique design resembling wild water, the oval tray that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art that resembles rough seas. An adventure for your imagination!

Silicone mold for a square tray with an engraved Ocean theme. The tray is 25 x 25 cm (10" x 10") and 8 mm (1/3") thick.

There are also molds available for matching coasters and a coaster holder, see one of the pictures (for illustration purposes, this item is only for the tray mold).

The 3 molds are also in two different sets available (coasters with holder, coasters with holder and tray), for special setprices.

Silicone mold for a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick. 

Unleash your creativity with our 'Wild Water' oval coasters! These unique coasters feature a rough texture that mimics the wild water effect, adding a bold touch to your drink serving experience.

Two silicone molds for:

• a set of four square coasters with an engraved Ocean theme. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Ocean coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Three silicone molds for:

• a set of four square coasters with an engraved Ocean theme. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Ocean coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a square Ocean tray. The tray is 25 x 25 cm (10" x 10") and 8 mm (1/3") thick.

Silicone mold for a holder for our Ocean themed coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. 

You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).