Seasonal

Silicone mold for a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide, 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.

There are also molds available for a small heart shaped tray / coaster holder (designed for these coasters) and for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

Silicone mold for two Holographic Intertwined Hearts. The hearts are 8 mm (1/3) thick and together they are 26.5 cm (10 2/5") wide and 19.5 cm (7 2/3") tall.

The mold has a holographic color effect, which  will transfer to the surface of your resin hearts.

The mold is also available in a regular verison, without the holographic color effect.

Silicone mold for two Intertwined Hearts. The hearts are 6 mm (1/4) thick and together they are 26.5 cm (10 2/5") wide and 19.5 cm (7 2/3") tall.

This mold is also available in a Holographic version.

Double, double toil and trouble, fire burn and cauldron bubble! (William Shakespeare)

Two silicone molds for:

• 4 coasters in the shape of a Whitch's Cauldron!! The coasters are 12.5 cm (5") wide, about 10 cm (4") high and 8 mm (1/3") thick.
• a large Whitch's Cauldron tray. The tray is 30 cm (12") wide, about 24 cm (9 1/3") high and 8 mm (1/3") thick.

The coasters and tray will be beautiful as Halloween decoration. The molds are also available separately.

Double, double toil and trouble, fire burn and cauldron bubble! (William Shakespeare)

Silicone mold for a large Whitch's Cauldron tray. The tray is 30 cm (12") wide, about 24 cm (9 1/3") high and 8 mm (1/3") thick. The Cauldron will be beautiful as Halloween decoration, for instance on a (front)door or wall.

There is also a mold available for 4 Whitch's Cauldron coasters. And both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the large Cauldron tray mold).

Double, double toil and trouble, fire burn and cauldron bubble! (William Shakespeare)

Silicone mold for 4 coasters in the shape of a Whitch's Cauldron!! The cauldrons are 12.5 cm (5") wide, about 10 cm (4") high and 8 mm (1/3") thick.

There is also a mold available for a large Cauldron tray that can for instance be used for Halloween frontdoor or wall decoration. And both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the cauldron coaster mold).

Silicone mold for a set of eight medallions, in the shape of a pair of Christmas Bells. There are also Christmas bells engraved into them. Each medallion is 5.5 cm (2 1/6") wide, 4.7 cm (1 4/5") high and 8 mm (about 1/3") thick.

Silicone mold for a set of eight (napkin ring) medallions, with a decorative 'Merry Christmas' engraving. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

We have several other molds available with the same 'Merry Christmas' engraving, see one of the pictures (for illustrative purposes, this item is only for the medallion mold) and these molds are also in a set of 2 or 3 molds available, for special setprices.

Note: do not apply too thick a dome layer on the legs of the holder, because then they will no longer fit through the slots.

Silicone mold for a large 'Merry Christmas' tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

We also have a 28 cm (11") large tray mold available, with the same decorative engraving. 

Create festive resin coasters with this handmade silicone Christmas coaster mold. The mold produces a set of four round coasters featuring a decorative “Merry Christmas” engraving, making it ideal for seasonal resin projects, handmade gifts, Christmas table décor and festive home accessories.

The detailed engraved design gives each finished coaster a distinctive Christmas look while the round shape keeps the design practical and easy to use. This silicone coaster mold for resin is handmade in our own workshop in the Netherlands and is designed for makers who want to create professional-looking seasonal pieces.

A matching coaster holder mold is available separately, allowing you to create a complete and coordinated Christmas coaster set. The coaster mold and holder mold are also available together as a set.

For an even more complete collection, we also offer a 3-piece Christmas mold set consisting of this coaster mold, the matching holder mold and a 28 cm (11") tray mold. One of the product images shows the complete set for inspiration; this product listing includes the coaster mold only.

Silicone mold for a Holder for our 'Merry Christmas' coasters. The holder has the same decorative engraving as the 'Merry Christmas' coasters and tray.

The legs of the holder are 40 mm (1 3/5") tall and you insert them from the bottomside through the slots of the 6 mm (1/4") thick base plate. You can fix the legs with a drop of glue or (UV) resin, so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The mold is also avalaible in a set with the coaster mold and in a set with both the coaster and tray mold, as shown in on of the pictures (for illustrative purposes, this item is only for the holder mold).

Silicone mold for a Christmas themed winebutler for 6 glasses.

The winebutler has 2 layers, one layer is 8 mm (1/3") thick and the second layer, which is a Christmas wreath, is only 0.75 mm (1/34") thin. The Christmas wreath will be raised on the surface of the winebutler.

Note: do not apply too thick a dome layer on the legs of the holder, because then they will no longer fit through the slots.

The figures in these molds present themself also in 12 cute Christmas ornaments, for which we have a mold available separately.

Silicone mold for a large Cute Christmas tray. The tray is 30 cm (12") wide and 8 mm (1/3") thick.

The tray features the same Christmas figures as in the cute Christmas coasters, coaster holder and in the mold for 12 cute Christmas ornaments.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The figures in these molds present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for a Holder for our Cute Christmas coasters. The holder is engraved with a bunch of cute Christmas figures and it's suitable for every round coaster with a diameter of 10 cm (4"), but it's especially meant for our Cute Christmas coasters.

The legs of the holder are 40 mm (1 3/5") tall and you insert them from the bottomside through the slots of the 6 mm (1/4") thick base plate. You can fix the legs with a drop of glue or (UV) resin, so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The figures in the holder present themself also in a set of 4 coasters, a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for a set of four round Cute Christmas coasters. The coasters are 10 cm ( 4") wide, 8 mm (1/3") thick and they are engraved with a bunch of cute Christmas figures. 

There is also a mold available for a matching holder and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The figures in the coasters present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Two silicone molds for in total 12 Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

Both molds are also available separately. And we have the molds also in a holographic version available.

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a holographic version available.

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a holographic version available.

Silicone mold for 12 cute engraved Christmas ornaments. The ornaments are between 6 cm and 10.5 cm (2 1/3" and 4") high and they are 6 mm (1/4") thick. Each ornament has a hole for a ribbon or cord. 

Silicone mold for a large holographic Christmas Bell + 6 small holographic Christmas Bells. The large Bell is 24.5 cm (9 2/3") wide and 25 cm (10") high. It also has a hole of 8 mm (1/3") at the top, to put a ribbon or cord through it. The Bell consists of two layers, a base layer of 8 mm (1/3") thick and on top of which a wireframe pattern of 0.75 mm thick is applied. The pattern will be raised on the surface of your beautiful creation.

The 6 small Christmas Bells vary in size from 5 cm (2") to about 8 cm (3"). They are 6 mm (1/4") thick and they have the pattern engraved in them. These bells also have holes for a hanging cord.

All bells have a holographic color effect, that will transfer to the surface of your resin Christmas bells.

We also have the same mold available without the holographic color effect.