Coasters

Silicone mold for a set of four Cascade Hexagon coasters. The coasters are from side to side 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Hexagon tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for a set of four Cascade Round coasters. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a large round tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for two thick Rocky coasters. The coasters are appr. 12.5 cm (5") wide and 2 cm (4/5") thick. The flat surface at the top is appr. 8 cm (3 1/6") wide.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in one of the pictures.

Silicone mold for a set of four Cascade Pebble coasters. The coasters are 11 cm (4 1/3") wide, 13 cm (5 1/5") high and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a large and an extra large Pebble tray mold available with the same Cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). The large tray mold and this coaster mold are also available as a set, at a special price.

Create a distinctive set of four square coasters with this handmade Tumbled Marble silicone mold. The rough, stone-like surface and softly irregular texture give every finished piece the appearance of naturally tumbled marble, making this mold perfect for modern, minimalist and organic home décor.

This mold is especially well suited for Jesmonite, Jesin, A1 and similar mineral-based casting materials, where the matte surface really comes into its own. The subtle stone texture creates a premium handmade look that works beautifully with neutral tones, terrazzo effects, pigments and natural colour combinations.

The coasters can be used on their own or combined with our matching Square Tumbled Marble Trays, available in two sizes, to create a coordinated collection for tables, interiors and handmade gift sets.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Important: this mold does not have a glossy finish. Resin can be used, but the finished casting will remain matte rather than glossy.

Matching products: Square Tumbled Marble Tray molds are also available in 20 × 20 cm and 30 × 30 cm.

Silicone mold for a set of four square coasters with a raised edge and a 'Tetris' pattern. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

The same sized coasters are also available without a raised edge, these are 6 mm (1/4") thick.

A matching Tetris coaster holder is separately available, which holds 4 coasters, and both the coaster mold and the holder mold are also as a set available, for a special setprice.

To make the Tetris range complete, there is a square 28 x 28 cm (11" x 11") Tetris tray with raised edge in our collection, see some of the pictures (for illustration purposes, this item is only for the coaster mold).

Create a coordinated set of four organic coasters with this handmade Cobble Coasters silicone mold. Inspired by smooth cobblestones, each coaster has its own subtle, flowing outline, giving the finished set a relaxed, natural and contemporary appearance.

The clean casting surfaces and polished edges make these silicone coaster molds for resin ideal for creative techniques such as marbling, layered colours, metallic accents, botanical inclusions or minimalist designs. Because every coaster has a slightly different shape, the complete set feels cohesive while still retaining an organic, handmade character.

These Cobble Coasters are a stylish choice for modern table décor, handmade gifts and everyday use. Their soft asymmetrical shapes pair beautifully with contemporary interiors and naturally complement other designs from the Cobble collection.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Silicone mold for a set of four coasters, engraved with the Lily Mandala. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This holder mold is part of our Lily Mandala line, which also includes a coaster holder, a set of 8 medallions, a tray of 25 cm (10") and an XL tray of 35.5 cm (14"), as shown in one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The coaster mold and holder mold are also as a set available, for a special setprice.

Silicone mold for a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick. 

Unleash your creativity with our 'Wild Water' oval coasters! These unique coasters feature a rough texture that mimics the wild water effect, adding a bold touch to your drink serving experience.

Silicone mold for a set of four round Cute Christmas coasters. The coasters are 10 cm ( 4") wide, 8 mm (1/3") thick and they are engraved with a bunch of cute Christmas figures. 

There is also a mold available for a matching holder and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The figures in the coasters present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for a set of 4 Holographic Oriental coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Oriental coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Oriental coaster holder and a large holographic Oriental tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a set of four square coasters with an engraved Ocean theme. The  coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

There is also a matching coaster holder available, which holds 4 coasters, and a 25 cm (10") square  tray with the same Ocean theme, see one of the pictures (for illustration purposes, this item is only for the coaster mold).

The 3 molds are also in two different sets available (coasters with holder, coasters with holder and tray), for special setprices.

Create an elegant floral coaster set with this handmade silicone mold for four Lavatera Flower Coasters. Each coaster features the same graceful flower shape and delicate engraved petal details as the matching Lavatera trays, giving the finished pieces a refined botanical look.

The smooth casting surface and subtle floral engraving make these flower coaster silicone molds for resin ideal for experimenting with coordinated colours, shimmering pigments, metallic accents, dried flowers or individual decorative effects. You can create a matching set or give every coaster its own unique character.

These Lavatera coasters are beautiful on their own and pair perfectly with the matching Lavatera trays, available in three different sizes. Together, they create a coordinated floral collection for table décor, handmade gifts and decorative resin pieces.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Silicone mold for two Tube coasters. The coasters are 12.5 x 12.5 cm (5" x 5") wide and 1 cm (2/5") thick. The coasters have a flat bottom and the top consists of 5 adjacent tubes.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in the pictures.

We also have a mold available for a matching Tube tray, see one of the pictures (for illustrative purposes, this item is only for the Tube coasters mold). Both molds are also available as a set, for a special setprice.

Silicone mold for four Poppy-shaped Coasters. The coasters are 12 cm (4 3/4") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick. The petals are delicately engraved.

Say hello to your new favorite coaster set! Inspired by wild Blooming Poppies, this mold makes four elegant, poppy-shaped coasters, that will instantly add a floral flair to your home. Whether you go for soft pastel tones or bold reds and blacks, just like real poppies, the possibilities are endless. It's time to pour, play, and bloom!

The mold is part of our Poppy collection, which also includes a mold for 9 ornaments and two tray molds.

Silicone mold for a set of four round Easter coasters, featuring Little Thumper with his brothers and sisters! The coasters are 10 cm (4") wide and 8 mm (1/3") thick.

There is also a matching coaster holder available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold). Both molds are also as a set available, for a special setprice.

You can find Little Thumper not only on this mold and the holder mold, he also appears on molds for a large tray, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!