All molds

Set of two silicone molds for our trays with the Fantasy theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 larger trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a decorative Halloween shield, featuring a Black Scary Cat! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Greet trick-or-treaters with this spooktastic Halloween shield! Featuring a scary 'black' cat, bats and a spiderweb, this Halloween decoration is sure to have visitors “cat-tured” in its bewitchment!

We also have 3 other molds available for a Halloween shield, all with their own decorative design, see one of the the pictures for one of them (for illustrative purposes, this item is only for the 'Scary Cat' shield).

Three silicone molds for:

• a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.
• a mold that can serve as a holder mold for the Scallop coasters and also as a small tray mold. The scallop is 16.5 cm (6.5") x 14.5 cm (5 2/3") and 8 mm (1/3") thick .
  The two small scallops are meant to be used as stands on the tray, to create a holder for the scallop coasters and they can for instance be fixed with glue, resin or in a toplayer.
• a large Scallop tray. The tray is 25 cm (10") x 22.5 cm (9") and 8 mm (1/3") thick.

There are also Scallop molds available for an XL tray and for medallions, see some of the pictures (for illustrative purposes, this item is only for the coaster mold with holder and large tray mold).

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a non-holographic version available.

Silicone mold for 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.

There is also a mold available for a large Pumpkin tray and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin coaster mold).

Silicone mold for 2 large Christmas Angels with Crystal Wings. Each Angel is 20 cm (8") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 6 Angels of 10 cm (4") tall and one with 4 Angels of 15 cm (6") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Deep pour silicone mold for a beautiful letter on top of a thick block. The size of the block is 10 x 10 cm (4" x 4") and it's 2 cm (4/5") thick. The letter is 7.5 cm (3") tall and 3 mm (1/9") thick. The width of the letter differs per letter.

This item is for one mold with one letter and you can select any letter of the Alphabet under the 'Available Options'.

The same block molds are also available in a larger version of 15 x 15 cm (6" x 6").

Silicone mold for a large Holographic Magical tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have holographic Magical molds available for coasters and a coaster holder, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Magical tray mold).

We also have Magical trays available in a normal version, without the holographic color effect.

Silicone mold for a set of eight decorative Scallop medallions. Each medallion is 5.5 cm (2 1/6") x  4.8 cm (1 9/10") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray and two larger trays, see one of the pictures (for illustrative purposes, this item is only for the medallions mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a Flower Arranger with a diameter of 17 cm (6 2/3").

It's a known 'problem', you sometimes get a nice little bouquet of flowers, but you only have a vase that is too big to put them in. Then this Flower Arranger will be an outcome, because now you will be able to arrange the flowers nicely in that large vase.

This mold has 9 holes and there is also a mold available with 5 holes, see one of the pictures (for illustrative purposes, this item is only for the mold with 9 holes).

There is also a Holographic version of this mold available and also a mold for a much larger Flower Arranger of 27.5 cm (11") with 21 holes.

Thanks to Atelier 'De Schone Schijn' for the picture with the white Flower Arranger.

Silicone mold for a set of four 'Oriental' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster holder mold, 4 trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the coasters mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

This mold is also available in a Holographic version.

Silicone mold for a deep round disc. The disc is 12 cm (4 3/4") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

The disc mold is suitable for deep pour projects, like flower preservation. We also have a deep pour round mold available in 17 cm (6 2/3"), 22 cm (8 2/3") and in 27 cm (10 2/3").

Set of 2 silicone molds for 4 Round Geode coasters and a matching holder. The coasters have the same shape as our round Geode trays, but then smaller, they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters.

The molds are also available seperately.

A set with these two molds and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the coaster and holder mold).

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder!

Double, double toil and trouble, fire burn and cauldron bubble! (William Shakespeare)

Silicone mold for 4 coasters in the shape of a Whitch's Cauldron!! The cauldrons are 12.5 cm (5") wide, about 10 cm (4") high and 8 mm (1/3") thick.

There is also a mold available for a large Cauldron tray that can for instance be used for Halloween frontdoor or wall decoration. And both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the cauldron coaster mold).

Silicone mold for a set of eight Holographic (napkin ring) medallions, in the shape of Geode Rocks. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.

These medallions are the same as our normal Geode medallions, but then with a Holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a large Heart-shaped Trinket Dish. The Trinket Dish is 26 x 22,5 cm (10 1/4" x 9") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the heart dish an elegant appearance!

Silicone mold for 9 round pendants with a keychain hole and a 'Wild Water' effect on the surface. The pendants are 6 cm (2 1/3") wide and 9 mmm (1/3") thick.

We also have molds available for 9 or 4 pendants with a smooth surface.

BOO!

Silicone mold for 8 Holographic Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression. The holographic color effect will transfer to the surface of your resin ghost keychains!

The mold is also available in a version without the holographic color effect. 

Silicone mold for a large Trinket Dish. The Trinket Dish is 15 x 30 cm (6" x 12") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are also molds for a smaller and larger Trinket Dish available, see one of the pictures (for illlustrative purposes, this item is only for the large Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for a Holographic Geode winebutler, for two glasses. The winebutler is 8 mm (1/3") thick.

The shape of the winebutler is the same as our normal Geode winebutler mold, but then with a holographic color effect, which  will transfer to the surface of your resin winebutler.