Trier par:
Trier par:
579 produits
579 produits


'Merry Christmas' Coasters
€29,95 EUR
Prix unitaire par'Merry Christmas' Coasters
€29,95 EUR
Prix unitaire parSilicone mold for a set of four round coasters with a decorative 'Merry Christmas' engraving. The coasters are 10 cm ( 4") wide and 8 mm (1/3") thick.
There is also a mold available for a matching holder and both molds are also as a set available.
We also have a set of 3 molds available, with the coaster mold, the holder mold and a 28 cm (11") tray mold, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).


Set of 2 Decoration eggs (medium size)
€28,95 EUR
Prix unitaire parSet of 2 Decoration eggs (medium size)
€28,95 EUR
Prix unitaire parSilicone mold for a set of 2 medium sized Decoration eggs. The eggs are 17,5 cm (7") tall and 6 mm (1/4") thick.
The mold can be used to make beautiful decorations for an Easter branch or tree.
We also have molds for smaller decoration eggs (including a holographic egg mold) and a tray in our collection.

Holographic Decoration egg (large)
€21,95 EUR
Prix unitaire parHolographic Decoration egg (large)
€21,95 EUR
Prix unitaire parSilicone mold for a large Holographic Decoration egg, that can for instance be used to decorate Easter branches or a tree. The egg is 20 cm (8") tall and 6 mm (1/4") thick. The holographic color effect will transfer to the surface of your resin egg.
We also have molds for smaller decoration eggs (including a holographic one) and a tray in our collection.

Set of 3 molds - Round Geode Coasters with Holder and large Tray
Set of 3 molds - Round Geode Coasters with Holder and large Tray
Set of 3 silicone molds for 4 Round Geode coasters with a matching holder and a large round Geode Tray. The coasters have the same shape as the tray and they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters. The Geode tray is 25 cm (10") wide and 10 mm (2/5") thick.
You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.
The molds are also separately available.

Domino - set of 28 stones
€29,95 EUR
Prix unitaire parDomino - set of 28 stones
€29,95 EUR
Prix unitaire parSilicone mold for 28 Domino stones. These are special stones because the dots are hexagon shaped and the surface of the stones is uneven, which gives each stone a unique look! The stones are 24 mm x 50 mm (appr. 1" x 2") and about 6 mm (1/4") thick.
A Domino tray mold is separately available, in which the 28 Domino stones can be stored, see one of the pictures (for illustrative purposes, this item is only for the mold for 28 domino stones).
Both molds are also as a set available, for a special setprice.

Hexagon napkin rings
€23,95 EUR
Prix unitaire parHexagon napkin rings
€23,95 EUR
Prix unitaire parThis mold is especially designed to use together with our mold for eight Hexagon medallions, see one of the pictures (for illustrative purposes, this item is only for the ring mold).
There are also hexagon shaped molds available for two trays, a set of four coasters and a matching coaster holder.

Six-pack Mini Coasters with holder
€42,95 EUR
Prix unitaire parSix-pack Mini Coasters with holder
€42,95 EUR
Prix unitaire parYou can also pour two feet whit this mold, that can be attached to the holder with glue or (UV) epoxy.

Medallions - Mandala Jerusalema
€25,95 EUR
Prix unitaire parMedallions - Mandala Jerusalema
€25,95 EUR
Prix unitaire parThis medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.
(The mold for the rings is separately available, the photo that shows both the medallion mold and ring mold is for illustrative purposes only. In this article only the medallion mold is included.)

Set of 2 trays - Mandala Jerusalema (S + M)
Set of 2 trays - Mandala Jerusalema (S + M)
Each tray is also separately available.

Gingerbread men - 9x (XS)
€31,95 EUR
Prix unitaire parGingerbread men - 9x (XS)
€31,95 EUR
Prix unitaire parSilicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.
We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Pumpkin coasters - 4 pcs
€37,95 EUR
Prix unitaire parPumpkin coasters - 4 pcs
€37,95 EUR
Prix unitaire parSilicone mold for 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.
There is also a mold available for a large Pumpkin tray and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin coaster mold).

Druzy Crystal Christmas Angels - 2x (large)
€37,95 EUR
Prix unitaire parDruzy Crystal Christmas Angels - 2x (large)
€37,95 EUR
Prix unitaire parSilicone mold for 2 large Christmas Angels with Crystal Wings. Each Angel is 20 cm (8") tall and 6 mm (1/4") thick.
We have 2 more Christmas Angel molds with crystal wings available, one with 6 Angels of 10 cm (4") tall and one with 4 Angels of 15 cm (6") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Holder for Kintsugi coasters of 10 x 10 cm (4"x 4")
€22,95 EUR
Prix unitaire parHolder for Kintsugi coasters of 10 x 10 cm (4"x 4")
€22,95 EUR
Prix unitaire parSilicone mold for a holder for Kintsugi coasters (Kintsugi is the Japanese art of fixing broken pottery). The holder is large enough for four coasters of 10 x 10 cm (4" x 4") and 8 mm (1/4") thick.
You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
The 3 molds are also in two sets available (coasters with holder, coasters with holder and tray), for special setprices.

Round coasters - Peacock (Mandala)
€38,95 EUR
Prix unitaire parRound coasters - Peacock (Mandala)
€38,95 EUR
Prix unitaire parSilicone mold for a set of four coasters, engraved with the Mandala Peacock. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.
The coaster mold is part of our 'Peacock Mandala' design line, in which besides this mold are also three cake stand molds (with center hole), a coaster holder and a mold for 8 medallions.
The coaster mold and holder mold are also as a set available, for a special setprice.

Set of 2 inlay molds - Round Crushed Ice (6" and 9" - wavy edge)
Set of 2 inlay molds - Round Crushed Ice (6" and 9" - wavy edge)

Geode coasters (irregular shaped) - 15 mm (3/5") thick
€49,95 EUR
Prix unitaire parGeode coasters (irregular shaped) - 15 mm (3/5") thick
€49,95 EUR
Prix unitaire parBoth molds are also as a set available and there are also Druzy inlay molds for the Geode coasters.

Medallions - Fantasy
€25,95 EUR
Prix unitaire parMedallions - Fantasy
€25,95 EUR
Prix unitaire parSilicone mold for a set of eight decorative (napkin ring) 'Fantasy' medallions. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.
The medallion mold is part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 cake stands and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).
We made several of these molds in sets available, for special setprices.

Business card holder Landscape
€16,95 EUR
Prix unitaire parBusiness card holder Landscape
€16,95 EUR
Prix unitaire parThere is also a mold available for portrait business cards, see the pictures (for illustrative purposes, this item is only for the portrait mold).

Wall Hanging - round (L)
€34,95 EUR
Prix unitaire parWall Hanging - round (L)
€34,95 EUR
Prix unitaire parSilicone mold for a large round Wall Hanging. The diameter is 25 cm (10"), 8 mm (1/3") thick and it has two large hanging loops, for putting a cord or ribbon through.
This mold is perfect for crafting stunning resin art to decorate any space. Let your creativity flow and design beautiful, personalized décor that adds a special touch to your home. Elevate your walls with custom-made resin masterpieces!

Holographic Halloween Ghost keychains - 8 pcs
€24,95 EUR
Prix unitaire parHolographic Halloween Ghost keychains - 8 pcs
€24,95 EUR
Prix unitaire parBOO!
Silicone mold for 8 Holographic Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression. The holographic color effect will transfer to the surface of your resin ghost keychains!
The mold is also available in a version without the holographic color effect.

Perforated Duo - small disc and oval
€22,95 EUR
Prix unitaire parPerforated Duo - small disc and oval
€22,95 EUR
Prix unitaire parSilicone mold for a small Disc and Oval, both perforated with holes that are evenly spaced along the edges.
The disc is 10.5 cm (4") wide, 8 mm (1/3") thick and it has 28 holes. The center space between the holes is 8.3 cm (3 1/4") wide.
The oval is 10.5 x 15 cm (4" x 6") wide, 8 mm (1/3") thick and it has 34 holes. The center space between the holes is 8.3 x 12.8 cm (3 1/4" x 5") wide.

Square Lead Glass tray - Daisy bud
€41,95 EUR
Prix unitaire parSquare Lead Glass tray - Daisy bud
€41,95 EUR
Prix unitaire parSilicone mold for a square tray with a decorative lead glass 'Daisy bud' pattern. The tray is 24.5 cm x 24.5 cm (9 3/5" x 9 3/5") wide and in total almost 9 mm (1/3") thick. The 'Daisy bud' pattern is 0.75 mm thick and it will be raised on the surface of the tray.
There is also a holographic version of the same tray design available and both versions of this 'Daisy bud' pattern are also available as 5 mm (1/5") thick inlay molds, for our 1 cm and 2 cm deep square tray molds.

Tall legs for the square coaster holder
€9,95 EUR
Prix unitaire parTall legs for the square coaster holder
€9,95 EUR
Prix unitaire parThis mold can only be used together with the mold for the 10 cm (4") square coaster holder, see one of the pictures (for illustrative purposes, this item is only for the mold for tall legs).

Tealight Candle holder - Holographic with Decorative corners
€19,95 EUR
Prix unitaire parTealight Candle holder - Holographic with Decorative corners
€19,95 EUR
Prix unitaire parSilicone mold for a Holographic Tealight Candle Holder with decorative corners. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The decoration is raised on the surface.
The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.
We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.
We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.
Affichage de 216/579
Afficher
par page