Tabletts

Silicone mold for an extra large tray with a Yin Yang symbol engraved into it. Two sunflowers form the symbol and it is the same Yin Yang as we used in the mold for the set of four Yin Yang Sunflower coasters. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick. 

The tray is also in a 10" (M) version available.

Silicone mold for a large Holographic Geode tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have matching holographic Geode molds available for coasters, a coaster holder and medallions, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Geode tray mold). The 3 molds are also available in 2 different sets, for special setprices.

Update: We now have the same holographic tray also in a smaller 18 cm (7") version available.

Silicone mold for a large Cascade Geode tray. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a smaller tray mold available with the same cascade design. 

Silicone mold for an XL Oval tray. The tray is 24 x 35 cm (9 2/5" x 13 3/4") wide, 1 cm (2/5") thick and it is engraved with thin graceful lines.

There are also molds available for matching coasters, a coaster holder and a smaller tray, all engraved with the same graceful line pattern.

This tray is also available in a plain version.

Silicone mold for a medium sized 'Fantasy' tray. The tray is 20 cm (8") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 larger trays, 1 smaller tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for an extra large (XL) 'Magical' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a small Cascade Geode tray. The tray is about 18 cm (7") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a larger tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the small tray mold).

Siliocone mold for a round disc with ribbed edge. The disc is 25 cm (10") wide and  8 mm (1/3") thick.

There are also molds available for a smaller ribbed edge tray of 15 cm (6"), for an XL ribbed edge tray of 35.5 cm (14") and for ribbed edge coasters and matching coaster holder, see one of the pictures (for illustrative purposes, this item is only for the 25 cm disc mold). Some of these molds are also in a set available, for a special setprice.

Silicone mold for a large round tray with rough sides. The tray has a diameter of 22.5 cm (9") and it is 12 mm (1/2") thick.

Introducing our mold for a Rough & Tough round tray! Create a unique decorative tray with rough edges and a shiny surface. The mold is thick and large, perfect to showcase your creativity. The result will be a true masterpiece, whether you made the tray with resin or acrylic resin.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for a large Holographic Magical tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have holographic Magical molds available for coasters and a coaster holder, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Magical tray mold).

We also have Magical trays available in a normal version, without the holographic color effect.

Silicone mold for a Rectangular tray. The tray is 15 x 30 cm (6" x 12") and 1 cm (2/5") thick.

Silicone mold for a Geode tray with Rough sides. The tray is about 22 x 26 cm (8 2/3" x 10 1/4") wide and 12 mm (1/2") thick.

Bring a touch of the extraordinary into your home with the Rough & Tough Geode Tray. Made to look like a Geode slice, this tray is sure to make a statement with its rough sides and sturdy design. The thick mold gives you many technique options for a stunning tray, created by you!

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for a large Cup tray. The tray is 25 cm (10") wide, 18 cm (7") high and 8 mm (1/3") thick.

There is also a mold for a set of 4 Cup coasters available, see one of the pictures (for illustrative purposes, this item is only for the Cup tray mold). Both molds are also available as a set, for a special setprice.

Siliocone mold for a round disc with ribbed edge. The disc is 15 cm (6") wide and  8 mm (1/3") thick.

There are also molds available for two larger ribbed edge trays of 25 cm (10") and 35.5 cm (14) and for ribbed edge coasters and matching coaster holder, see one of the pictures (for illustrative purposes, this item is only for the 15 cm disc mold).

Silicone mold for a small 'Fantasy' tray. The tray is 15 cm (6") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 3 larger trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a square tray with a 'Tetris' pattern. The tray is 28 x 28 cm (11" x 11") wide, 1 cm (2/5") thick and has a raised edge.

The tray is part of several molds with the 'Tetris' pattern, see the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for a large Heart shaped tray with rough sides. The tray is 26 cm (10") wide, 22.5 cm (9") high and 12 mm (1/2") thick.

Fall in love with our mold for a Rough & Tough Heart shaped tray! The mold allows you to create a beautiful masterpiece, with a rough twist. So use all your creativity and get ready for a tray that will make your heart skip a beat! Just like true Love.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

Silicone mold for a square tray with a decorative lead glass 'Daisy bud' pattern. The tray is 24.5 cm x 24.5 cm (9 3/5" x 9 3/5") wide and in total almost 9 mm (1/3") thick. The 'Daisy bud' pattern is 0.75 mm thick and it will be raised on the surface of the tray.

There is also a holographic version of the same tray design available and both versions of this 'Daisy bud' pattern are also available as 5 mm (1/5") thick inlay molds, for our 1 cm and 2 cm deep square tray molds.

Silicone mold for a large decorative Pumpkin tray, featuring a Spooky House with some menacing bats! The tray is 28 cm (11") wide, 27 cm (10 2/3") high and 8 mm (1/3") thick. The Spooky House design is 0.75 mm thick and it will be raised on the surface of the tray.

Start your Halloween decorations off on the right foot with this spooky-cool Pumpkin tray! Featuring a large Halloween pumpkin, with a spooky house and even a few bats, it will be a frightful sight and it's the perfect way to get you in the spooky spirit. Boo-tiful!

We also have another mold available for a large Halloween pumpkin tray, featuring a Tombstone Zombie.

Silicone mold for a Christmas Tray, featuring a friendly Gnome. The Gnome is 30 cm (12") high, 15 cm (6") wide and 8 mm (1/4") thick.

We also have 4 other Gnome (ornament) molds available, varying in size from 8 cm (3 1/6") to 22.5 cm (8 4/5").

Silicone mold for a large Cascade Pebble tray. The tray is 20.5 cm (8") wide, 25 cm (10") high and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

We have this tray also in an XL version available.

There is also a Pebble coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the Pebble tray mold). Both molds are also available as a set, at a special price.

Silicone mold for an extra large (XL) 'Oriental' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the XL tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.