Seasonal

Silicone mold for a large Christmas Bell + 6 small Christmas Bells. The large Bell is 24.5 cm (9 2/3") wide and 25 cm (10") high. It also has a hole of 8 mm (1/3") at the top, to put a ribbon or cord through it. The Bell consists of two layers, a base layer of 8 mm (1/3") thick and on top of which a wireframe pattern of 0.75 mm thick is applied. The pattern will be raised on the surface of your beautiful creation.

The 6 small Christmas Bells vary in size from 5 cm (2") to about 8 cm (3"). They are 6 mm (1/4") thick and they have the pattern engraved in them. These bells also have holes for a hanging cord.

The same mold is also available in a holographic version. The holographic color effect will transfer to the surface of your resin Christmas bells.

Silicone mold for 6 Holographic Christmas Bell ornaments, with holes for a ribbon or cord. Each bell is 10 cm (4") wide and high, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for 6 Christmas Bell ornaments, with holes for a ribbon or cord. Each bell is 10 cm (4") wide and high and they are 6 mm (1/4") thick.

The same bells are also available in a mold with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Silicone mold for 6 Holographic Christmas Star ornaments, with holes for a ribbon or cord. Each star is 10 cm (4") wide and high, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for 6 Christmas Star ornaments, with holes for a ribbon or cord. Each star is 10 cm (4") wide and high and they are 6 mm (1/4") thick.

The same stars are also available in a mold with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Silicone mold for 9 Holographic Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. The ornaments are 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for 9 Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. They are 6 mm (1/4") thick.

The same ornaments are also available with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Silicone mold for a set of 6 large Holographic Christmas Baubles. Each bauble is 10 cm (4") wide, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas baubles.

We have 4 more Christmas Bauble molds of the same size available, with druzy crystal patterns, with raised decorative patterns, with engraved Gnomes (8 mm thick) and with a smooth surface.

Silicone mold for an Easter Flower Arranger, to arrange that beautiful, but small bouquet of daffodils in the only (too large) vase that you have! The finishing touch on each beautifully decorated Easter breakfast table.

The Flower Arranger is 17 cm (6 2/3") wide and 8 mm (1/3") thick, featuring Little Thumper with his brothers and sisters!

You can find Little Thumper not only on this mold, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a tealight candle holder and an egg holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a set of eight decorative Easter medallions, engraved with Little Thumper and decorative eggs. Each medallion is 5.5 cm (2 1/6") tall, 4.4 cm (1 3/4") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on these medallions, he also appears on molds for a set of 4 coasters, a matching coaster holder, an egg holder, a large tray, a flower arranger and a tealight candle holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for an (Easter) Egg holder, featuring Little Thumper with his brothers and sisters! The egg holder is 20 cm (8") wide and 8 mm (1/3") thick, it can store up to 6 eggs.

The center has a hole of 6 mm (1/4"), which makes it easy to attach cakestand hardware to the holder and turn it into an even more decorative tray.

You can find Little Thumper not only on this egg holder, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a flower arranger and a tealight candle holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for an Easter Tealight Candle holder, featuring Little Thumper with his brothers and sisters! The candle holder is 16 cm (6 3/10") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on this candle holder, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a large Easter tray, featuring Little Thumper with his brothers and sisters! The tray is 30.5 cm (12") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on this large tray, he also appears on molds for a set of 4 coasters, a matching coaster holder, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

You can find Little Thumper not only on these two molds, he also appears on molds for a large tray, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a holder for our Easter coasters, featuring Little Thumper with his brothers and sisters! The holder can hold 4 coasters of 10 cm (4") wide and 8 mm (1/3") thick.

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This holder is a perfect match for the Easter coasters with the same engraved design, see one of the pictures (for illustrative purposes, this item is only for the holder mold).

Both molds are also as a set available, for a special setprice.

You can find Little Thumper not only on this mold and the coaster mold, he also appears on molds for a large tray, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a set of four round Easter coasters, featuring Little Thumper with his brothers and sisters! The coasters are 10 cm (4") wide and 8 mm (1/3") thick.

There is also a matching coaster holder available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold). Both molds are also as a set available, for a special setprice.

You can find Little Thumper not only on this mold and the holder mold, he also appears on molds for a large tray, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a large oval tray, engraved with daisies. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the narcissus tray and the wild flowers tray, see one of the pictures (for illustrative purposes, this item is only for the mold with the daisies).

Silicone mold for a large oval tray, engraved with narcissuses. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the daisies tray and the wild flowers tray, see one of the pictures (for illustrative purposes, this item is only for the mold with narcissuses).

Silicone mold for a large oval tray, engraved with wild flowers. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the daisies tray and the narcissus tray, see one of the pictures (for illustrative purposes, this item is only for the wild flowers mold).

Silicone mold for a Holographic Tealight Candle Holder with Rudolph the Red Nosed Reindeer. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. Rudolph is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Silicone mold for a Tealight Candle Holder with a Druzy crystal Star. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Christmas Baubles, you can never have enough of them when you want to decorate your house to get into the Christmas spirit.

With this silicone mold for 6 large Christmas Baubles it will be a breeze to give a personalized touch to your Christmas decoration! Each bauble is 10 cm (4") wide and 6 mm (1/4") thick.

We have 4 more Christmas Bauble molds of the same size available, with holographic color effects, with raised decorative patterns, with engraved Gnomes (8 mm thick) and with decorative druzy crystal patterns.

Two silicone molds for in total 12 Holographic Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

Both molds are also available separately. And we have the molds also in a non-holographic version available.

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 7 cm (2 3/4") and 9.5 cm (3 3/4") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a non-holographic version available.