Weihnachten-Winter

Silicone mold for 2 medium size Christmas Ornaments with a Happy Santa Claus. Santa is 15 cm (6") high and 8 mm (1/3") thick.

We also have 4 other Happy Santa molds available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a large Cute Christmas tray. The tray is 30 cm (12") wide and 8 mm (1/3") thick.

The tray features the same Christmas figures as in the cute Christmas coasters, coaster holder and in the mold for 12 cute Christmas ornaments.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for a large standing Gingerbread Man. The figure is 22.5 cm (8 9/10") high and 2.5 cm (1") thick, excluding the raised pattern of 2 mm.

Add some festive cheer to your home with a Standing Gingerbread Man! Perfect for adding a touch of Christmas spirit to your table, dresser or windowsill, this jolly little guy will bring a smile to your face. Plus, he doubles as a charming holiday decoration. Be creative, get this mold and make your own now!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Gingerbread man, it will have a matte finish.

Silicone mold for a Decorative Christmas ornament with a beautiful Curls design. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Curls design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Snowflake, see one of the pictures (for illustrative purposes, this item is only for the Decorative Curls mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone mold for a set of eight medallions, in the shape of a pair of Christmas Bells. There are also Christmas bells engraved into them. Each medallion is 5.5 cm (2 1/6") wide, 4.7 cm (1 4/5") high and 8 mm (about 1/3") thick.

Silicone mold for a set of four round Cute Christmas coasters. The coasters are 10 cm ( 4") wide, 8 mm (1/3") thick and they are engraved with a bunch of cute Christmas figures. 

There is also a mold available for a matching holder and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The figures in the coasters present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for a large Christmas Ornament with a Gingerbread House. The house is 18 cm (7") high, 20 cm (8") wide and 8 mm (1/3") thick.

We also have 4 other molds with the same Gingerbread House available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a larg Christmas Ornament with a Happy Santa Claus. Santa is 20 cm (8") high and 8 mm (1/3") thick.

We also have 4 other Happy Santa molds available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a Decorative Christmas ornament with a Snowflake. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Snowflake design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Snowflake mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Note: do not apply too thick a dome layer on the legs of the holder, because then they will no longer fit through the slots.

The figures in these molds present themself also in 12 cute Christmas ornaments, for which we have a mold available separately.

Silicone mold for a medium size Christmas Bauble with a Decorative Ribbon. The bauble is 15 cm (6") wide, 20.5 cm (8") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 10 cm (4") and 20 cm (8") wide, see the attached picture (for illustrative purposes, this item is only for the medium size Bauble mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a Wall hanging, decorated with some beautiful wrapped Christmas gifts. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with Santa Claus flying through the sky.

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

We also have a 28 cm (11") large tray mold available, with the same decorative engraving. 

Silicone mold for a Christmas themed winebutler for 6 glasses.

The winebutler has 2 layers, one layer is 8 mm (1/3") thick and the second layer, which is a Christmas wreath, is only 0.75 mm (1/34") thin. The Christmas wreath will be raised on the surface of the winebutler.

Silicone mold for a Decorative Christmas ornament with a Christmas tree. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Christmas tree design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Snowflake and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Christmas tree mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The figures in these molds present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for a Holder for our 'Merry Christmas' coasters. The holder has the same decorative engraving as the 'Merry Christmas' coasters and tray.

The legs of the holder are 40 mm (1 3/5") tall and you insert them from the bottomside through the slots of the 6 mm (1/4") thick base plate. You can fix the legs with a drop of glue or (UV) resin, so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The mold is also avalaible in a set with the coaster mold and in a set with both the coaster and tray mold, as shown in on of the pictures (for illustrative purposes, this item is only for the holder mold).

Silicone mold for a Holder for our Cute Christmas coasters. The holder is engraved with a bunch of cute Christmas figures and it's suitable for every round coaster with a diameter of 10 cm (4"), but it's especially meant for our Cute Christmas coasters.

The legs of the holder are 40 mm (1 3/5") tall and you insert them from the bottomside through the slots of the 6 mm (1/4") thick base plate. You can fix the legs with a drop of glue or (UV) resin, so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The figures in the holder present themself also in a set of 4 coasters, a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.