Weihnachten-Winter

Silicone mold for 10 engraved Gingerbread ornaments. The ornaments are between 7.5 (3") and 8 cm (3 1/6") tall and they are 6 mm (1/4") thick.

There are nine different ornaments, the Gnome ornament is double and the candy stick is mirrored.

Silicone mold for a large holographic Christmas Bell + 6 small holographic Christmas Bells. The large Bell is 24.5 cm (9 2/3") wide and 25 cm (10") high. It also has a hole of 8 mm (1/3") at the top, to put a ribbon or cord through it. The Bell consists of two layers, a base layer of 8 mm (1/3") thick and on top of which a wireframe pattern of 0.75 mm thick is applied. The pattern will be raised on the surface of your beautiful creation.

The 6 small Christmas Bells vary in size from 5 cm (2") to about 8 cm (3"). They are 6 mm (1/4") thick and they have the pattern engraved in them. These bells also have holes for a hanging cord.

All bells have a holographic color effect, that will transfer to the surface of your resin Christmas bells.

We also have the same mold available without the holographic color effect.

Silicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Silicone mold for 15 extra extra small Christmas Angels. The angels are 5 cm (2") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 7.5 cm (3") to 20 cm (8"). Some of them are also available in a Druzy crystal version.

Silicone mold for 2 large Christmas Angels with Crystal Wings. Each Angel is 20 cm (8") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 6 Angels of 10 cm (4") tall and one with 4 Angels of 15 cm (6") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Silicone mold for a set of four round coasters with a decorative 'Merry Christmas' engraving. The coasters are 10 cm ( 4") wide and 8 mm (1/3") thick.

There is also a mold available for a matching holder and both molds are also as a set available.

We also have a set of 3 molds available, with the coaster mold, the holder mold and a 28 cm (11") tray mold, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Silicone mold for a Tealight Candle Holder with a Druzy crystal Star. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Four silicone inlay molds featuring an engraved Cute Gnome. The molds are 9.2 cm (3 2/3") wide and appr. 3 mm (1/9") thick.

These inlay molds are a perfect match for our round coaster mold, or even for our mold for a Coffee and Cookies serving tray, as shown in one of the pictures (artist: Petra van Vlaanderen), resulting in a creation with a raised edge and a beautiful design.

We also have other round inlay molds available with different patterns.

Silicone mold for 6 small Holographic Christmas Angels. Each Angel is 10 cm (4") tall, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas angels.

We also have a mold available for 4 Holographic Christmas Angels of 15 cm (6") each, see one of the pictures (for illustrative purposes, this item is only for the mold with 6 Christmas Angels).

Both molds are also available in a version without the holographic color effect and  in a version with druzy crystal Angel wings.

Silicone mold for a set of eight decorative (napkin ring) medallions, with a Snowflake engraved into it. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available, the photo that shows the (napkin) ring mold is for illustrative purposes only. This item is only for the snowflake medallion mold.)

Silicone mold for a large Christmas Bell + 6 small Christmas Bells. The large Bell is 24.5 cm (9 2/3") wide and 25 cm (10") high. It also has a hole of 8 mm (1/3") at the top, to put a ribbon or cord through it. The Bell consists of two layers, a base layer of 8 mm (1/3") thick and on top of which a wireframe pattern of 0.75 mm thick is applied. The pattern will be raised on the surface of your beautiful creation.

The 6 small Christmas Bells vary in size from 5 cm (2") to about 8 cm (3"). They are 6 mm (1/4") thick and they have the pattern engraved in them. These bells also have holes for a hanging cord.

The same mold is also available in a holographic version. The holographic color effect will transfer to the surface of your resin Christmas bells.

Silicone mold for a set of 6 large Christmas Baubles with engraved Gnomes. Each bauble is 10 cm (4") wide and 8 mm (1/3") thick. There are three different patterns in the mold, two of each.

We have 4 more Christmas Bauble molds of the same size available (which are 6 mm thick), with holographic color effects, with druzy crystal patterns, with raised decorative patterns and with a smooth surface.

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a holographic version available.

Three silicone molds for Druzy Crystal Christmas ornaments, one with a Christmas tree, one with a Christmas star and one with a Cristmas bell. Each ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.

The molds are also available separately.

Silicone mold for 2 large Christmas Angels. Each Angel is 20 cm (8") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 15 cm (6"). Some of them are also available in a Druzy crystal version.

Silicone mold for a large 'Merry Christmas' tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for a large Christmas Bauble Trinket Dish. The Trinket Dish is 21.5 x 22.5 cm (8 1/2" x 8 9/10") wide and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").

Looking for a festive way to stash your holiday treats? Look no further and create your own decorative Christmas dish with this mold! It will be perfect for holding your favorite candies and sweets (warning: may cause an increase in Christmas spirit!).

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) trinket dish, it will have a matte finish.

Silicone mold for 6 Holographic Christmas Bell ornaments, with holes for a ribbon or cord. Each bell is 10 cm (4") wide and high, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Three silicone molds for Decorative Christmas ornaments, one with a Christmas tree, one with a Snowflake and one with a Curls design. Each ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The decorative pattern on the ornaments are 0.75 mm thick and they will be raised on the surface of the ornaments.

The molds are also available separately.

Silicone mold for a Christmas ornament with a Druzy Crystal Christmas tree. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.

We have 2 more Druzy Crystal ornament molds of the same size available, one with a Christmas star and one with a Christmas bell, see one of the pictures (for illustrative purposes, this item is only for the Crystal Christmas tree mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone mold for a set of eight (napkin ring) medallions, with a decorative 'Merry Christmas' engraving. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

We have several other molds available with the same 'Merry Christmas' engraving, see one of the pictures (for illustrative purposes, this item is only for the medallion mold) and these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a large standing Nosy Rudolph. Rudolph is about 22.5 cm (8 9/10") wide and high and 2.5 cm (1") thick, excluding the raised eyes and nose.

Meet Nosy Rudolph, the quirky reindeer on a mission to find Santa! The handcrafted Christmas decoration that you can create with this mold, adds a playful touch to any table, dresser or windowsill. Get creative and make it a unique centerpiece for your holiday decoration!

!! ATTENTION: besides the eyes and nose, Rudolph doesn't have a glossy finish. Use the mold therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Rudolph, it will have a matte finish. However, you can for instance use resin first for the eyes and nose, making them pop out on your finished creation.