Produits

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

We also have a 28 cm (11") large tray mold available, with the same decorative engraving. 

Set of two silicone molds for four irregular shaped Geode coasters and a matching holder. The Coasters are approx. 12.5 cm (5") wide and 10 mm (2/5") thick. The holder is 10 mm (2/5") thick.

Cure your thirst for something original with this set of 2 molds! The Geode coasters mold has an irregular shape and it comes with a holder mold, making it a unique set. Your guests won't be able to resist the 'rock'ing atmosphere! ;)

The molds are also available separately.

Set of two silicone molds for four irregular shaped Geode coasters and a matching holder. The Coasters are approx. 12.5 cm (5") wide and 15 mm (3/5") thick. The holder is 12 mm (1/2") thick.

Cure your thirst for something original with this set of 2 molds! The thick Geode coasters mold has an irregular shape and it comes with a holder mold, making it a unique set. Your guests won't be able to resist the 'rock'ing atmosphere! ;)

The molds are also available separately.

Two silicone molds for:

• 28 Domino stones. These are special stones because the dots are hexagon shaped and the surface of the stones is uneven, which gives each stone a unique look! The stones are 24 mm x 50 mm (appr. 1" x 2") and about 6 mm (1/4") thick.
• a tray to store the 28 Domino stones, to better prevent them from getting lost. The dimensions of the tray are 21 cm x 25 cm (8 1/3" x 10") and it is in total 1 cm (2/5") thick. The tray has two layers, one for the decorative border, which is 6 mm (1/4") thick and a second layer of 4 mm (1/6") for the baseplate. The baseplate has a decorative pattern engraved into it.

Two silicone molds for in total 12 Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

Both molds are also available separately. And we have the molds also in a holographic version available.

Two silicone molds for in total 12 Holographic Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

Both molds are also available separately. And we have the molds also in a non-holographic version available.

Set of 2 silicone molds for 4 Cascade Daisy coasters with a matching large tray. The coasters are 12 cm (4 3/4") wide and 9 mm (1/3") thick. The tray is 26 cm (10 1/4") wide and also 9 mm (1/3") thick. 

The coasters and the the tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Set of 2 silicone molds for 4 Cascade Geode coasters with a matching tray. The coasters are about 12.5 cm (5") wide and 9 mm (1/3") thick. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The coasters and the the tray are made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

There is also a a smaller Geode tray mold available with the same cascade design.

Set of 2 silicone molds for 4 Cascade Hexagon coasters with a matching large tray. The coasters are from side to side 11 cm (4 1/3") wide and 9 mm (1/3") thick. The tray is from side to side 25 cm (10") wide and also 9 mm (1/3") thick. 

The coasters and the the tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Set of 2 silicone molds for 4 Cascade Roman coasters with a matching large tray. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. The tray is 25 cm (10") wide and also 9 mm (1/3") thick. 

The coasters and the the tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Two silicone molds for:

• a set of 4 Cup Coasters. The coasters are 12.5 cm (5") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick.
• a large Cup tray. The tray is 25 cm (10") wide, 18 cm (7") high and 8 mm (1/3") thick.

Both molds are also available separately.

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The figures in these molds present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

You can find Little Thumper not only on these two molds, he also appears on molds for a large tray, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Set of two silicone molds for our trays with the Fantasy theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 1 smaller tray, 1 larger tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Set of two silicone molds for our trays with the Fantasy theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 larger trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Set of 2 molds for:

• 4 Halloween coasters, featuring a Spiderweb! The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The Webdesign is 0.75 mm thick and it will be raised on the surface of the coasters.
• a large Halloween tray, also featuring a Spiderweb! The tray is 30 cm (12") wide and 8 mm (1/3") thick. The Big Web is also 0.75 mm thick and it will be raised on the surface of the tray.

Be a hit at any spooky party with this fun set of spiderweb coasters and tray. With big spiders for extra CREEPYNESS! They make for an eerie decorative combo that's sure to raise the hair on the backs of your guests' necks! Add these to your Halloween decor!

Both molds are also available separately.

Two silicone molds for:

• a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide. 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.
• a mold that can be used to make a holder for the coasters and also a small Heart shaped tray. The heart is 18 cm (7") wide, 17 cm (6 3/4") tall and 8 mm (1/3") thick.
  The two small hearts are meant to be used as stands on the tray, to create a holder for the heart shaped coasters and they can for instance be fixed with glue, resin or in a toplayer.

There is also a mold available for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the coaster mold with holder / small tray mold).

Set of two silicone molds for 4 Hexagon coasters and a matching holder. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The matching holder can hold four Hexagon coasters of 8 mm thick. The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

These two molds are part of our line of Hexagon molds, which also consists of two hexagon trays, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There are also two special prized sets of 3 molds available with these two molds, one set with the medium sized hexagon tray and one set with the large hexagon tray.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder.

Set of 2 Holographic silicone molds for 4 Geode coasters and a matching holder. The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for these coasters and both molds have a holographic color effect, which  will transfer to the surface of your resin coasters.

The molds are also available separately.

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.