Produits

Silicone mold for a set of eight Holographic Magical (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick. 

These medallions are the same as our normal Magical medallions, but then with a holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a set of eight decorative (napkin ring) medallions, engraved with the Lily Mandala. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring. 

This holder mold is part of our Lily Mandala line, in which besides this mold are also molds available for a set of 4 coasters, a coaster holder  and a tray of 25 cm (10"), as shown in one of the pictures (for illustrative purposes, this item is only for the medallion mold).

Silicone mold for a set of eight decorative (napkin ring) medallions, with our Magical shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a set of eight decorative (napkin ring) medallions, with our Oriental  shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures for some of them (for illustrative purposes, this item is only for the medallion mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a set of eight decorative (napkin ring) medallions, engraved with the Peacock Mandala. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring. 

This medallion mold is part of our 'Peacock Mandala' design line, in which besides this mold are also three cake stand molds (with a center hole), a set of four coasters and a coaster holder.

Silicone mold for a set of eight round (napkin ring) medallions. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).

Silicone mold for a set of eight decorative (napkin ring) medallions, with a Snowflake engraved into it. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available, the photo that shows the (napkin) ring mold is for illustrative purposes only. This item is only for the snowflake medallion mold.)

Look, who is peeping through the window? That's Rudolph, the red nose Reindeer! He probably wants to join in the fun Christmas festivities.

Deep pour silicone mold with Rudolph, the Red nose Reindeer. The size of the block mold is 15 x 15 cm (6" x 6") and it's 2 cm (4/5") thick. Rudolph is watching on top of the block, he is 3 mm (1/9") thick.

The mold is thick enough to add for instance a string of Christmas lights in the resin, which will give a beuatiful look to Rudolph!

Silicone mold for a Trinket Dish in the shape of an Oak leaf. The Oak leaf is 24 x 32 cm (9 1/2" x 12 1/2") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge around the compartments is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick and each compartment has a different size.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Oak leaf dish an elegant appearance! And because of the 5 compartments you can use the dish also as a serving tray!

There is also a Trinket Dish mold available in the shape of a Clover leaf. Other available molds for trinket dishes have an ovalish shape.

Silicone mold for an Organic shaped Tealight Candle Holder. The candle holder is appr. 9 x 11 cm ( 3 1/2" x 4 1/3") and 4.5 cm (1 3/4") high.

The candle holder has a beautiful organic shape and it's very suitable for pouring flowers, for example.

You can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.

We also have 'deep-pour' molds available for other tealight candle holders, as seen in some of the pictures (for illustrative purposes, this item is only for the Organic shaped tealight candle holder mold).

Silicone mold for a set of four 'Oriental' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster holder mold, 4 trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the coasters mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a large 'Oriental' tray. The tray is 25.5 cm (10") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, 2 smaller trays, a larger tray and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the large tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a medium sized 'Oriental' tray. The tray is 20 cm (8") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, one smaller tray, 2 larger trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the medium sized tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a small 'Oriental' tray. The tray is 15 cm (6") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, 3 larger trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the small tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for an extra large (XL) 'Oriental' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the XL tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a set of 4 Oval coasters. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

We have the molds also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

There is also a mold available for the same size oval coasters, but then engraved with thin 'Graceful lines'.

Silicone mold for a set of 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays with the same graceful line pattern available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

The molds are also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for an Oval Slate tray. The tray is 30 cm x 22.5 cm (12" x 8 4/5") large and 8 mm (1/3") thick. The edge of the tray is coarsened, just like real slate, which makes the tray a perfect match with our slate coaster mold and coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

The tray has a smooth surface, the 'crushed ice' effect that is shown in the pictures, is made with some of our inlay molds, which are available separately.

Silicone mold for a large Oval tray. The tray has the shape of an egg and it is 25,5 cm (10") tall and 8 mm (1/3") thick.

 The tray is also part of our Easter collection, with molds for smaller decorations, large engraved oval trays and more (to come).