All molds

Silicone mold for a small Holographic Magical tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

The same shape of this holographic tray is also available in size Large 28 cm (11") .

Silicone mold for a large Hexagon tray. The tray is 31 cm (12 1/8") wide, measured from corner to opposite corner, and 8 mm (1/3") thick.

This tray mold is part of our line of Hexagon molds, in which besides this mold are also molds for a set of four coasters, a matching coaster holder, a smaller tray, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There is a special prized hexagon mold set available which has this tray, the mold for 4 hexagon coasters and the matching coaster holder, see one of the pictures.

Set of two silicone molds for four irregular shaped Geode coasters and a matching holder. The Coasters are approx. 12.5 cm (5") wide and 10 mm (2/5") thick. The holder is 10 mm (2/5") thick.

Cure your thirst for something original with this set of 2 molds! The Geode coasters mold has an irregular shape and it comes with a holder mold, making it a unique set. Your guests won't be able to resist the 'rock'ing atmosphere! ;)

The molds are also available separately.

Silicone mold for a large Druzy (crystal) Wreath. The external diameter of the wreath is 22 cm (8 2/3") and the internal diameter is 14 cm (5 1/2"). The wreath is 23 mm (9/10") high.

Resin quantity: approx. 360 gr. (13 oz)

A dazzling statement piece for every season! This mold is a true showstopper, featuring a fully textured, sparkling crystal surface in a beautifully round design. Whether you're creating elegant home decor, festive holiday pieces, or unique resin art with embedded fairy lights, this mold offers endless creative possibilities. With its generous depth, it's perfect for experimenting with colors, layers, lights and glowing effects. Let your imagination shine and craft something truly magical!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a medium sized matte Tree of Life symbol. This Tree of Life is 20 cm (8") wide and 15 mm (3/5") thick.

The iconic Tree of Life symbolizes growth, balance and harmony. Use your artistic talents to create a beautiful and unique symbol, embrace your inner tree hugger and add a touch of whimsy to every room.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Tree of Life, it will have a matte finish, as shown in some of the pictures.

We also have (a larger) Tree of Life mold available which has a glossy finish, perfect to use with epoxy resin.

Two silicone molds for a medium size and a large round Trinket Dish. The medium Trinket Dish has a diameter of 18 cm (7") and the large Trinket Dish has a diameter of 23 cm (9").

Both Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Silicone mold for a large disc that is perforated with 66 holes, evenly spaced along the edge of the disc. The disc is 25 cm (10") wide and 8 mm (1/3") thick.

Open the gate to your creativity with the perforated disc that you can make with this mold! With 66 holes, it promises exciting horizons for all your fabric, ribbon, wicker and crochet projects. And who knows what other crafty ideas you'll come up with? Unleash your imagination and see what surprises you discover!

We also have a smaller perforated disc mold available, as well as a few other perforated molds).

Double, double toil and trouble, fire burn and cauldron bubble! (William Shakespeare)

Two silicone molds for:

• 4 coasters in the shape of a Whitch's Cauldron!! The coasters are 12.5 cm (5") wide, about 10 cm (4") high and 8 mm (1/3") thick.
• a large Whitch's Cauldron tray. The tray is 30 cm (12") wide, about 24 cm (9 1/3") high and 8 mm (1/3") thick.

The coasters and tray will be beautiful as Halloween decoration. The molds are also available separately.

Silicone mold for a deep round disc. The disc is 17 cm (6 2/3") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

The disc mold is suitable for deep pour projects, like flower preservation. We also have a deep pour round mold available in 12 cm (4 3/4"), 22 cm (8 2/3") and in 27 cm (10 2/3").

Silicone mold for an XL Scallop tray. The tray is 33 cm (13") x 28.5 cm (11") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray, a large tray and for medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and the large tray), for special setprices.

Silicone mold for a set of eight decorative (napkin ring) medallions, shaped as a Geranium flower. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).

Silicone inlay mold with an engraved 'Mermaid circles' pattern. The mold is 24 cm (9 2/5 ") wide and no less than 5.5 mm (1/5") thick, with a straight edge. Therefore it's quite easy to make a tray with raised edge when this inlay mold is used in another larger and deeper round(ish) mold.

There are also two other sizes available, 15.5 cm (6 1/10") and 19.8 cm (7 4/5").

Set of 2 silicone molds for Wall Art panels. The panels are titled Parallel Tubes and Diagonal Tubes. Each panel is e panel is 20 x 20 cm (8"x 8") wide and they  can maximum be 19 mm (3/4") thick. 

!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in shiny (glossy) panels, they will have a matte finish.

The molds are also available separately.

Silicone mold for 4 medium size Holographic Christmas Angels. Each Angel is 15 cm (6") tall, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas angels.

We also have a mold available for 6 Holographic Christmas Angels of 10 cm (4") each, see one of the pictures (for illustrative purposes, this item is only for the mold with 4 Christmas Angels).

Both molds are also available in a version without the holographic color effect and  in a version with druzy crystal Angel wings.

Silicone mold for 4 Halloween coasters, featuring a Spiderweb! And the spider is still in the web, hunting for a treat!

The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The Webdesign is 0.75 mm thick and it will be raised on the surface of the coasters.

There is also a mold available for a large Spiderweb tray, with an even larger Spider, and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb coaster mold).

Silicone mold for a small Holographic Fantasy tray. The tray is 18 cm (7") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

The same shape of this holographic tray is also available in a large size of 28 cm (11").

Set of two silicone molds for our trays with the Magical theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder, 2 larger trays and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Two silicone molds for:

• 28 Domino stones. These are special stones because the dots are hexagon shaped and the surface of the stones is uneven, which gives each stone a unique look! The stones are 24 mm x 50 mm (appr. 1" x 2") and about 6 mm (1/4") thick.
• a tray to store the 28 Domino stones, to better prevent them from getting lost. The dimensions of the tray are 21 cm x 25 cm (8 1/3" x 10") and it is in total 1 cm (2/5") thick. The tray has two layers, one for the decorative border, which is 6 mm (1/4") thick and a second layer of 4 mm (1/6") for the baseplate. The baseplate has a decorative pattern engraved into it.

Silicone mold for a holder for four coasters. It can hold four coasters which are maximum 6 mm (1/4") thick. The edge of the holder is coarsened and it is especially designed for our Slate coasters, for which we have a mold available too.

The holder mold and coaster mold are also as a set available, for a special setprice.

Silicone mold for 3 medium size Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 15 cm (6") high and 8 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 8 cm (3 1/6") to 30 cm (12").

Silicone mold for a set of four Cascade Roman coasters. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Roman tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

BOO!

Silicone mold for 8 Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression.

The mold is also in a holographic version available (the holographic color effect will  transfer to the surface of your resin ghost keychains)!