All molds

Silicone mold for a set of eight Holographic (napkin ring) medallions, in the shape of Geode Rocks. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.

These medallions are the same as our normal Geode medallions, but then with a Holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for 2 small Christmas Baubles with a Decorative Ribbon. Each bauble is 10 cm (4") wide, 13.5 cm (5 1/3") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 15 cm (6") and 20 cm (8") wide, see the attached picture (for illustrative purposes, this item is only for the small Baubles mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a large holographic Christmas Bell + 6 small holographic Christmas Bells. The large Bell is 24.5 cm (9 2/3") wide and 25 cm (10") high. It also has a hole of 8 mm (1/3") at the top, to put a ribbon or cord through it. The Bell consists of two layers, a base layer of 8 mm (1/3") thick and on top of which a wireframe pattern of 0.75 mm thick is applied. The pattern will be raised on the surface of your beautiful creation.

The 6 small Christmas Bells vary in size from 5 cm (2") to about 8 cm (3"). They are 6 mm (1/4") thick and they have the pattern engraved in them. These bells also have holes for a hanging cord.

All bells have a holographic color effect, that will transfer to the surface of your resin Christmas bells.

We also have the same mold available without the holographic color effect.

Create an impressive statement piece with this handmade XL Druzy Round Trinket Dish silicone mold. The sparkling druzy crystal texture around the edge creates a striking contrast with the smooth glossy centre, making every finished piece feel luxurious and distinctive.

Experiment with transparent resin, metallic pigments, rich colours, glitter or layered effects to make the crystal-inspired texture truly stand out. This extra-large design is perfect for statement trays, decorative centrepieces, display pieces and large-scale resin art.

Looking for more crystal-inspired designs? Explore our complete Druzy Crystal Collection, featuring a wide range of shapes and sizes that can be combined into a coordinated collection.

Need inspiration? Take a look at the beautiful impression videos created by Petra Jongbloed and Peti’s Homeart to see this mold come to life and discover different ways to work with its striking druzy texture.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Photo & creation: Carina Dumais
Inspiration videos: Petra Jongbloed & Peti’s Homeart

Silicone mold for a medium size Druzy (crystal) Geode Trinket Dish, with a Thick Bottom. The external diameter of the dish is 18.5 cm (7 1/4") and the internal diameter is 13.5 cm (5 1/3"). The total height of the trinket dish is 21 mm ( 4/5"), with a raised inner edge of 8 mm (1/3"). The shiny bottom of the dish is 13 mm (1/2") thick.

Resin quantity: approx. 370 gr. (13 oz)

Unleash your creativity with this mold, featuring a beautifully thick, glossy base, this mold offers a lot of space for breathtaking resin art. Whether you're crafting mesmerizing 3D floral effects, layering colors, or experimenting with shimmering inclusions, this mold is perfect for creating a unique, eye-catching piece. Elevate your designs with the sparkling beauty of druzy crystals and make every creation truly magical!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a set of four round coasters with a 'Wild Water' effect on the surface. The coasters are 11.5 cm (4 1/2") wide and 9 mm (1/3") thick. 

Unleash your creativity with our 'Wild Water' round coasters! These unique coasters feature a rough texture that mimics the wild water effect, adding a bold touch to your drink serving experience.

Silicone mold for a Geode tray with Rough sides. The tray is about 22 x 26 cm (8 2/3" x 10 1/4") wide and 12 mm (1/2") thick.

Bring a touch of the extraordinary into your home with the Rough & Tough Geode Tray. Made to look like a Geode slice, this tray is sure to make a statement with its rough sides and sturdy design. The thick mold gives you many technique options for a stunning tray, created by you!

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for a Holographic Geode winebutler, for two glasses. The winebutler is 8 mm (1/3") thick.

The shape of the winebutler is the same as our normal Geode winebutler mold, but then with a holographic color effect, which  will transfer to the surface of your resin winebutler.

Silicone mold for an Oval Trinket Dish. The Trinket Dish is 25 x 17 cm (10" x 6 2/3") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

Silicone mold for a medium size Druzy (crystal) Geode Trinket Dish, which is entirely covered with Druzy Crystals! The external diameter of the dish is 18.5 cm (7 1/4") and the internal diameter is 14.5 cm (5 2/3"). The total height of the trinket dish is 18 mm ( 2/3"), with a raised inner edge of 8 mm (1/3"). The shiny bottom of the dish is 10 mm (2/5") thick.

Resin quantity: approx. 270 gr. (10 oz)

A true showstopper for resin artists! This mold is completely covered in a dazzling crystal texture, from the edges to the center. The result? A fully textured, sparkling masterpiece that takes resin artistry to the next level. Perfect for those who love experimenting with shimmering pigments, metallic effects, or bold color transitions. This mold invites you to push your creativity further and craft a one-of-a-kind crystal treasure!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for 7 Pumpkin keychains. The pumpkins are 6 mm (1/4") thick, 5.7 cm (2 1/4") wide and 6 cm (2 1/3") tall.

There are 2 other versions of the pumpkins available, a 'Halloween' version with engraved facial expressions  and a 'holographic Halloween' version with facial expressions (the holographic color effect will transfer to the surface of your resin pumpkin keychains). 

One of the pictures shows all 3 molds (for illustrative purposes, this item is only for the 'normal' pumpkin mold).

Silicone mold for a set of 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays with the same graceful line pattern available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

The molds are also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a Rectangular tray. The tray is 15 x 30 cm (6" x 12") and 1 cm (2/5") thick.

Set of two silicone molds for 4 Holographic Hexagon coasters and a matching holder. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The matching holder can hold four Hexagon coasters of 8 mm thick. 

The silicone molds have holographic color effects, which  will transfer to the surface of your resin artwork. Both molds are also in a normal version available, without holographic effect.

The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Tealight Candle Holder with the Holographic Yin Yang symbol. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The symbol is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration, see the pictures. A few of them are pictured in their finished state.

Holographic silicone inlay mold, hexagon shaped. The size of the inlay mold is 19 x 22 cm ( 7 1/2" x  8 2/3") and it is appr. 4 mm (1/6") thick. The inlay mold has a holographic color effect, which will transfer to the surface of your Hexagon tray.

The inlay is specifically matched to the size of our 23 cm (9") Medium Hexagon tray (item MOSH0192) and the thickness of this inlay mold makes it easy to create a tray with raised edge, by using that tray mold.

There is also an inlay mold with a honeycomb engraving available, that has the same size, as shown in one of the pictures (for illustrative purposes, this item is only for the Medium sized holographic inlay mold).

Silicone mold for a Tealight Candle Holder with a Druzy crystal heart. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Create a cheerful collection of 16 ocean-themed keychain ornaments with this handmade silicone mold. The set includes a variety of playful coastal designs, from a smiling dolphin, whale and seahorse to shells, coral, a turtle and a friendly little octopus. Each ornament has its own shape and character, while all pieces share a consistent 6 mm (1/4") thickness.

This ocean keychain silicone mold for resin is perfect for experimenting with bright ocean colours, pearlescent pigments, glitter, transparent effects and small decorative inclusions. The different designs work beautifully together as a coordinated coastal collection while still giving every finished piece its own unique look.

Use the finished ornaments as keychains, bag charms, hanging decorations, gift tags or handmade gifts for anyone who loves the sea. The mold is ideal for resin artists looking to create small, colourful coastal accessories from one versatile set.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Silicone mold for a set of 4 Oval coasters. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

We have the molds also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

There is also a mold available for the same size oval coasters, but then engraved with thin 'Graceful lines'.

Create festive resin coasters with this handmade silicone Christmas coaster mold. The mold produces a set of four round coasters featuring a decorative “Merry Christmas” engraving, making it ideal for seasonal resin projects, handmade gifts, Christmas table décor and festive home accessories.

The detailed engraved design gives each finished coaster a distinctive Christmas look while the round shape keeps the design practical and easy to use. This silicone coaster mold for resin is handmade in our own workshop in the Netherlands and is designed for makers who want to create professional-looking seasonal pieces.

A matching coaster holder mold is available separately, allowing you to create a complete and coordinated Christmas coaster set. The coaster mold and holder mold are also available together as a set.

For an even more complete collection, we also offer a 3-piece Christmas mold set consisting of this coaster mold, the matching holder mold and a 28 cm (11") tray mold. One of the product images shows the complete set for inspiration; this product listing includes the coaster mold only.