Wall Art

Silicone mold for a shiny Art panel, titled Feathers. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick.

Add an artistic touch to your interior with our shiny 'Feathers' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The feathers form a continuous pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

This mold has a shiny finish, the same design is also available in a 20 mm thick mold with a matte finish, perfect to use with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the shiny 'Feathers' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a large round Wall Hanging. The diameter is 25 cm (10"), 8 mm (1/3") thick and it has two large hanging loops, for putting a cord or ribbon through.

This mold is perfect for crafting stunning resin art to decorate any space. Let your creativity flow and design beautiful, personalized décor that adds a special touch to your home. Elevate your walls with custom-made resin masterpieces!

Silicone mold for an Art panel, titled Squares and Circles. The panel is 20 x 20 cm (8"x 8") wide, 18 mm (7/10") thick and all elements in the panel have different heights.

Add an artistic touch to your interior with our 'Squares and Circles' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The elements in the panel form a symmetrical pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Squares and Circles' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a matte Art panel, titled Feathers. The panel is 20 x 20 cm (8"x 8") wide and 20 mm (4/5") thick.

Add an artistic touch to your interior with our 'Feathers' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The feathers form a continuous pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the matte 'Feathers' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a Wall hanging, decorated with Santa, flying through the sky with his Reindeers. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with beautiful wrapped Christmas gifts.

Set of 2 silicone molds for Wall Art panels. The panels are titled Parallel Tubes and Diagonal Tubes. Each panel is e panel is 20 x 20 cm (8"x 8") wide and they  can maximum be 19 mm (3/4") thick. 

!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in shiny (glossy) panels, they will have a matte finish.

The molds are also available separately.

Silicone mold for an Art panel, titled Impact. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick. 

Create striking wall art with our Impact panel mold. Designed with bold, concentric shapes that "collide" for a dynamic, repeating pattern, this mold allows you to craft stunning, custom wall decor. Perfect for working with Jesmonite, Jesin or similar materials, the matte finish ensures a beautifully smooth, modern look. Combine multiple panels for endless design possibilities and turn your wall into a unique eyecatcher.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Botanicum. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick. 

Add an artistic touch to your interior with our 'Botanicum' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Botanicum' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a Wall hanging, decorated with some beautiful wrapped Christmas gifts. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with Santa Claus flying through the sky.

Silicone mold for an Art panel, titled Horizon. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick. 

Add an artistic touch to your interior with our 'Horizon' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Horizon' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Diagonal Tubes. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 19 mm (3/4") thick. 

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We also have another, similar, Tubes mold avalable, but then with parallel tubes. both molds are also available as a set, for a special setprice.

Silicone mold for an Art panel, titled Parallel Tubes. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 19 mm (3/4") thick. 

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We also have another, similar, Tubes mold avalable, but then with diagonal tubes. both molds are also available as a set, for a special setprice.

Set of 2 silicone molds for Art panels, titled Dunes. Both panels are 20 x 20 cm (8"x 8") wide and they can maximum be 18 mm (7/10") thick. 

Make a statement! This set of Dunes I and Dunes II molds offers a seamless, serene flowing sand dunes pattern that can be spread across your entire wall. Ideal for those looking to create a large, impactful wall decoration. The matte finish makes them perfect for Jesmonite and similar products, allowing you to capture both the texture and natural beauty of sand dunes perfectly.

Both molds are also available separately.

!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in shiny (glossy) panels, they will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Dunes II. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick. 

Bring nature into your home with this panel mold! As our other Dunes panel mold (Dunes I), this mold too features a similar serene flowing sand dunes pattern. You can use the mold as a standalone piece, perfect for creating unique wall decor. The matte finish ensures a perfect texture when used with Jesmonite and similar products. 

However, did you know you can cover an entire wall by combining Dunes I and Dunes II? Pair this mold with our Dunes I mold (available separately), to create a continuous pattern across your wall, as you can see in some of the pictures. Both molds are also available as a set, for a special setprice.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for an Art panel, titled Dunes I. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick. 

Transform your wall into a piece of art! This stunning mold features a subtle, flowing pattern reminiscent of serene sand dunes. The matte finish makes it perfect for working with Jesmonite and similar products that benefit from a natural, calm aesthetic.

Pair this mold with our Dunes II mold (available separately), to create a continuous pattern across your wall, as you can see in some of the pictures. Both molds are also available as a set, for a special setprice.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.