All molds

Silicone mold for a Tealight Candle Holder, Lantern Style. The candle holder is 7.8 cm (3") wide and 3.6 cm (1 2/5") high.

Light up your space with charm and character. This mold is designed to create an elegant lantern-shaped tealight holder with a soft, matte finish, perfect for use with casting materials like Jesmonite, Jesin, or Acrylic One. The finished piece is compact, but full of personality. Ideal for a calm interior vibe, gifts, table decorations, or minimalist home accents. Combine natural pigments or marbling effects to make each piece uniquely yours.

ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tealight candle holder, it will have a matte finish.

Silicone mold for a large Holographic Decoration egg, that can for instance be used to decorate Easter branches or a tree. The egg is 20 cm (8") tall and 6 mm (1/4") thick. The holographic color effect will transfer to the surface of your resin egg.

We also have molds for smaller decoration eggs (including a holographic one) and a tray in our collection.

Silicone mold for a Tealight Candle Holder with a Druzy crystal Star. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Silicone mold for a large Heart shaped tray with rough sides. The tray is 26 cm (10") wide, 22.5 cm (9") high and 12 mm (1/2") thick.

Fall in love with our mold for a Rough & Tough Heart shaped tray! The mold allows you to create a beautiful masterpiece, with a rough twist. So use all your creativity and get ready for a tray that will make your heart skip a beat! Just like true Love.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

Set of 3 silicone molds for 4 Round Geode coasters with a matching holder and a large round Geode Tray. The coasters have the same shape as the tray and they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters. The Geode tray is 25 cm (10") wide and 10 mm (2/5") thick. 

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The molds are also separately available.

Three silicone molds for a large 3-tier cake stand, engraved with the Peacock Mandala. The cake stands are 18 cm (7"), 24 cm (9 2/5") and 30 cm (11 4/5") wide and 8 mm (1/3") thick. The centers have a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The molds are part of our 'Peacock Mandala' design line, in which besides these molds are also a set of four coasters, a coaster holder and a mold for 8 medallions.

Silicone mold for a large rectangular Crystal Geode inlay mold. The mold is 17 cm (6 2/3") x 23.5 cm (9 1/4") and 4 mm (1/6") thick. 

Set of 2 silicone molds for 4 Cascade Daisy coasters with a matching large tray. The coasters are 12 cm (4 3/4") wide and 9 mm (1/3") thick. The tray is 26 cm (10 1/4") wide and also 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Two silicone molds for:

• 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.
• a large Pumpkin tray. The tray is 28 cm (11") wide, 27 cm (10 2/3") tall and 8 mm (1/3") thick.

Make your Halloween spooktacular with these 2 molds, perfect for adding a touch of autumnal fun to your seasonal decorations. Trick or treat!

The molds are also available separately.

Silicone mold for a set of eight Holographic Fantasy (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick. 

These medallions are the same as our normal Fantasy medallions, but then with a holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for 28 Domino stones. These are special stones because the dots are hexagon shaped and the surface of the stones is uneven, which gives each stone a unique look! The stones are 24 mm x 50 mm (appr. 1" x 2") and about 6 mm (1/4") thick.

 A Domino tray mold is separately available, in which the 28 Domino stones can be stored, see one of the pictures (for illustrative purposes, this item is only for the mold for 28 domino stones).

Both molds are also as a set available, for a special setprice.

Silicone mold for a small 'Fantasy' tray. The tray is 15 cm (6") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 3 larger trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a set of four coasters, engraved with the Mandala Peacock. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

The coaster mold is part of our 'Peacock Mandala' design line, in which besides this mold are also three cake stand molds (with center hole), a coaster holder and a mold for 8 medallions.

The coaster mold and holder mold are also as a set available, for a special setprice.

Silicone mold for a Christmas Trinket Dish, shaped as a friendly Gnome. The trinket dish is 25 cm (10") high, 13.5 cm (5 1/4") wide and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").

Add a touch of festive cheer to your home with a playful Gnome Trinket Dish. Perfect for holding small treasures or holiday treats, it brings a whimsical spirit to your Christmas decorations.

!! ATTENTION: only the Gnome itself has a smooth glossy finish (hat, beard, nose, hands and feet), the remaining part of the trinket dish has a matte finish. Use the mold therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a completely glossy trinket dish, but you can use Resin for the glossy parts to create a  sparkling Gnome.

Silicone mold for a set of four Cascade Daisy coasters. The coasters are 12 cm (4 3/4") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Daisy tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for a large Cup tray. The tray is 25 cm (10") wide, 18 cm (7") high and 8 mm (1/3") thick.

There is also a mold for a set of 4 Cup coasters available, see one of the pictures (for illustrative purposes, this item is only for the Cup tray mold). Both molds are also available as a set, for a special setprice.

Silicone mold for a set of 2 medium sized Decoration eggs. The eggs are 17,5 cm (7") tall and 6 mm (1/4") thick.

The mold can be used to make beautiful decorations for an Easter branch or tree.

We also have molds for smaller decoration eggs (including a holographic egg mold) and a tray in our collection.

This mold is especially designed to use together with our mold for eight Hexagon medallions, see one of the pictures (for illustrative purposes, this item is only for the ring mold).

There are also hexagon shaped molds available for two trays, a set of four coasters and a matching coaster holder.

Silicone mold for a set of eight decorative (napkin ring) 'Fantasy' medallions. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

The medallion mold is part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 cake stands and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).

We made several of these molds in sets available, for special setprices.

Silicone mold for a holder for our Fantasy coasters.

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, 4 trays, 2 cakestands and a set of 8 medallions,.

Several of these molds are in sets available, for special setprices.

The holder mold is also in a holographic version available, for spectacular color effects on the surface of your resin coaster holder, especially when combined with the holographic Fantasy coasters.