New molds

Silicone mold for an XL Druzy (crystal) Round Trinket Dish. The external diameter of the dish is 35 cm (13 3/4") and the internal diameter is 28 cm (11"). The total height of the trinket dish is 22 mm ( 9/10"), with a raised inner edge of 12 mm (1/2"). The shiny bottom of the dish is 10 mm (2/5") thick.

Make a bold statement with this Jumbo Druzy Crystal Trinket Dish! With its impressive size and sparkling crystals all around the edge, this mold is perfect for creating eye-catching centerpiece trays, luxurious decor pieces, or large-scale resin art. Designed for artists who like to think big, shine bright, and go all in.

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a Tealight Candle Holder, Lantern Style. The candle holder is 7.8 cm (3") wide and 3.6 cm (1 2/5") high.

Light up your space with charm and character. This mold is designed to create an elegant lantern-shaped tealight holder with a soft, matte finish, perfect for use with casting materials like Jesmonite, Jesin, or Acrylic One. The finished piece is compact, but full of personality. Ideal for a calm interior vibe, gifts, table decorations, or minimalist home accents. Combine natural pigments or marbling effects to make each piece uniquely yours.

ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tealight candle holder, it will have a matte finish.

Silicone mold for 2 large Cup 2 Go Trays. The Cups are 18 cm (7") tall, 12 cm (4 3/4") wide and 8 mm (1/3") thick.

Bigger, bolder, barista vibes! This silicone mold creates two large Cup 2 Go designs, standing 18 cm tall each. Ideal for statement pieces, coffee-themed decor, or as a fun resin art gift. Each cup features an engraved sleeve with either a heart or a circle in the center, perfect for personalizing with names, quotes or logos. Whether you're a coffee lover or a craft show seller, these bold cups are a great way to stand out from the crowd. Not suitable as keychains, just too good to stay small.

We also have a mold available for 9 Cup 2 Go keychains, as seen in one of the pictures (for illustrative purposes, this item is only for the large Cup 2 Go trays mold.

Silicone mold for 9 Cup 2 Go Keychains, in three variations. The Cups are 8 cm (3 1/6") high and 6 mm (1/4") thick.

Bring your resin art to-go! This fun mold lets you pour 9 mini Cup 2 Go keychains at once,  inspired by those iconic coffeehouse takeaway cups. Each cup has an engraved “sleeve” detail with a central shape (heart, circle or rectangle), that you can personalize with a name, short quote, or logo. Add some whipped cream charm on top, glitter your heart out, and create the perfect little gift for coffee lovers, besties or baristas.

We also have a mold available for 2 tall Cups 2 Go, as seen in one of the pictures (for illustrative purposes, this item is only for the keychain mold.

Silicone mold for an XL Cascade Pebble Tray. The extra large tray is 27.5 cm (10 4/5") wide, 33.5 cm (13 1/5") high and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Pebble coaster mold and a large Pebble tray mold available with the same cascade design.

Silicone mold for a Halloween (Wall) Sign - 'Trick or Treat'. The sign is 30 cm (12") wide, 15.5 cm (6") high and 8 mm (1/3") thick. The raised decorative pattern, including the text, is 1 mm thick.

The sign has two large holes for a cord or ribbon.

3 Silicone molds for Halloween Bat Hangers: 

• a small Bat Hanger, which is 20 cm (8") wide and 8 cm (3 1/4") high.
• a medium size Bat Hanger, which is 25 cm (10") wide and10 cm (4") high.
• a large Bat Hanger, which is 35 cm (12") wide and 12.5 cm (5") high.

The bats are 8 mm (1/3") thick and they have a raised decorative pattern, which is 1 mm thick.

The three molds are also available separately.

Silicone mold for a large Halloween Bat Hanger. The bat is 30 cm (12") wide, 12.5 cm (5") high and 8 mm (1/3") thick. The raised decorative pattern is 1 mm thick.

We also have 2 other Bat Hanger molds available, with a width of 20 cm (8") and 25 cm (10"), see one of the pictures (for illustrative purposes, this item is only for the large Bat Hanger mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a medium size Halloween Bat Hanger. The bat is 25 cm (10") wide, 10 cm (4") high and 8 mm (1/3") thick. The raised decorative pattern is 1 mm thick.

We also have 2 other Bat Hanger molds available, with a width of 20 cm (8") and 30 cm (12"), see one of the pictures (for illustrative purposes, this item is only for the medium size Bat Hanger mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a small Halloween Bat Hanger. The bat is 20 cm (8") wide, 8 cm (3 1/4") high and 8 mm (1/3") thick. The raised decorative pattern is 1 mm thick.

We also have 2 other Bat Hanger molds available, with a width of 25 cm (10") and 30 cm (12"), see one of the pictures (for illustrative purposes, this item is only for the small Bat Hanger mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a large Magical Potion Bottle with a Rose and Skull! The bottle is 12 cm (4 3/4") wide, 25.5 cm (10") high and 8 mm (1/3") thick. The raised decorative pattern has a thickness of 1 mm. 

We also have molds available for three other large Magical Potion bottles.

Silicone mold for a large Magical Potion Bottle with a Scary Pumpkin! The Potion bottle is 13 cm (5") wide, 25.5 cm (10") high and 8 mm (1/3") thick. The raised decorative pattern has a thickness of 1 mm. 

We also have molds available for three other large Magical Potion bottles.

Silicone mold for 8 Halloween Bats keychains. The bats are 12 cm (4 2/3") wide, 5.3 cm (2") high and 6 mm (1/4") thick.

Four of the bats have a keyring hole in their right wing and the other four have a keyring hole in their left wing.

Three silicone molds for Christmas Baubles with a decorative ribbon:

• Two baubles of 10 cm (4") wide and 13.5 cm (5 1/3") high.
• One bauble of 15 cm (6") wide and 20.5 cm (8") high.
• One bauble of 20 cm (8") wide and 27.5 (10 4/5") high.

Each bauble is 8 mm (1/3") thick and the molds are also available separately.

Silicone mold for a large Christmas Bauble with a Decorative Ribbon. The bauble is 20 cm (8") wide, 27.5 cm (10 4/5") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 10 cm (4") and 15 cm (6") wide, see the attached picture (for illustrative purposes, this item is only for the large Bauble mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a medium size Christmas Bauble with a Decorative Ribbon. The bauble is 15 cm (6") wide, 20.5 cm (8") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 10 cm (4") and 20 cm (8") wide, see the attached picture (for illustrative purposes, this item is only for the medium size Bauble mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for 2 small Christmas Baubles with a Decorative Ribbon. Each bauble is 10 cm (4") wide, 13.5 cm (5 1/3") high and 8 mm (1/3") thick.

We also have 2 other Bauble molds with ribbon available, which are 15 cm (6") and 20 cm (8") wide, see the attached picture (for illustrative purposes, this item is only for the small Baubles mold).

The three molds are also available as a set, for a special setprice.

Silicone mold for a Christmas Trinket Dish, shaped as a friendly Gnome. The trinket dish is 25 cm (10") high, 13.5 cm (5 1/4") wide and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").

Add a touch of festive cheer to your home with a playful Gnome Trinket Dish. Perfect for holding small treasures or holiday treats, it brings a whimsical spirit to your Christmas decorations.

!! ATTENTION: only the Gnome itself has a smooth glossy finish (hat, beard, nose, hands and feet), the remaining part of the trinket dish has a matte finish. Use the mold therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a completely glossy trinket dish, but you can use Resin for the glossy parts to create a  sparkling Gnome.

Silicone mold for a Christmas Tray, featuring a friendly Gnome. The Gnome is 30 cm (12") high, 15 cm (6") wide and 8 mm (1/4") thick.

We also have 4 other Gnome (ornament) molds available, varying in size from 8 cm (3 1/6") to 22.5 cm (8 4/5").

Silicone mold for a large Christmas Ornament, featuring a friendly Gnome. The Gnome is 22.5 cm (8 4/5") high and 8 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 8 cm (3 1/6") to 30 cm (12").

Silicone mold for 3 medium size Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 15 cm (6") high and 8 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 8 cm (3 1/6") to 30 cm (12").

Silicone mold for 6 small Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 11 cm (4 1/3") high and 6 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 8 cm (3 1/6") to 30 cm (12").

Silicone mold for 12 extra small Christmas Ornaments, featuring a friendly Gnome. Each Gnome is 8 cm (3 1/6") high and 6 mm (1/4") thick.

We also have 4 other Gnome molds available, varying in size from 11 cm (4 1/3") to 30 cm (12").

Silicone mold for a large Christmas Tray - 'Gingerbread House'. The House is 22.5 cm (8 4/5") high, 25 cm (10") wide and 8 mm (1/3") thick.

We also have 4 other (ornament) molds with the Gingerbread House available, varying in size from 7.5 cm (3") to 20 cm (8").