All molds

Three silicone molds for a medium size, a large and an XL Trinket Dish. The medium Trinket Dish is 12.5 x 25 cm (5" x 10") wide, the large Trinket Dish is 15 x 30 cm (6" x 12") wide and the XL Trinket Dish is 17.5 x 35 cm (7" x 14") wide.

The Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Silicone mold for a medium size disc that is perforated with 48 holes, evenly spaced along the edge of the disc. The disc is 18 cm (7") wide and 8 mm (1/3") thick.

Open the gate to your creativity with the perforated disc that you can make with this mold! With 48 holes, it promises exciting horizons for all your fabric, ribbon, wicker and crochet projects. And who knows what other crafty ideas you'll come up with? Unleash your imagination and see what surprises you discover!

We also have a larger perforated disc mold available, as well as a few other perforated molds).

Silicone mold for 28 Holographic Domino stones. The stones are 24 mm x 50 mm (appr. 1" x 2") and 8 mm (1/3") thick.

The dots are hexagon shaped and the stones have a holographic finish that will transfer to the surface of your resin domino stones, giving you a beautiful display of colors!

We also have a non-holographic domino mold available, whose stones have a unique uneven surface.

Set of two silicone molds for 4 Hexagon coasters and a matching holder. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The matching holder can hold four Hexagon coasters of 8 mm thick. The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

These two molds are part of our line of Hexagon molds, which also consists of two hexagon trays, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There are also two special prized sets of 3 molds available with these two molds, one set with the medium sized hexagon tray and one set with the large hexagon tray.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder.

Silicone mold for 8 different Potion Bottle keychains. The bottles are 8 cm (3 1/6") high and 6 mm (1/4") thick.

Increase your Halloween mood with a Magic Potion or Love Potion Bottle keychain! This unique keychain mold lets you create your own potion bottle for a touch of witchy charm. Perfect for Halloween or anytime you need a little magic or love in your life.

We also have a mold available for 10 cm (4") high and 8 mm (1/3") bottles without keychain holes.

Set of 2 silicone molds for 4 Cascade Geode coasters with a matching tray. The coasters are about 12.5 cm (5") wide and 9 mm (1/3") thick. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

There is also a a smaller Geode tray mold available with the same cascade design.

Silicone mold for a large Oval tray. The tray is 17 x 25 cm (6 2/3" x 9 5/6") and 1 cm (2/5") thick.

We also have an XL oval tray available, see one of the pictures (for illustrative purposes, this item is only for the large oval tray mold).

This oval tray is also available with a 'Graceful lines' engraving.

Silicone mold for a large Amethyst. The size of the Amethyst is about 11 cm (4 1/3") x 10 cm (4") and maximum about 3.5 cm (1 1/3") high.

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a non-holographic version available.

Silicone mold for a set of 4 Holographic Magical coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Magical coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Magical coaster holder and a holographic Magical tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a Holographic Tealight Candle Holder with Rudolph the Red Nosed Reindeer. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. Rudolph is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Tic-Tac-Toe is a game for 2 players who take turns marking the spaces in a 3×3 grid with an X or an O. The player who succeeds in placing three of their marks in a diagonal, horizontal or vertical row is the winner. It's a fun and not that easy game.

With this silicone mold you can make your own personalized Tic-Tac-Toe board game. The dimensions of the game board are 22 cm (8 2/3") x 16 cm (6 1/3") and it consists of 3 layers:

• a 1 mm (1/25") thin layer for the title of the game plus a divider
• a 6 mm (1/4") thick playing field layer (which includes a holder for the tenth game piece) 
• a 4 mm (1/6") thick baseplate layer.

The three layers makes it possible to vary endlessly with colored resin.

Silicone mold for 4 medium size Christmas Angels. Each Angel is 15 cm (6") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 20 cm (8"). Some of them are also available in a Druzy crystal or Holographic version.

Silicone mold for a medium sized 'Fantasy' tray. The tray is 20 cm (8") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 larger trays, 1 smaller tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a Flower Arranger with a diameter of 17 cm (6 2/3").

It's a known 'problem', you sometimes get a nice little bouquet of flowers, but you only have a vase that is too big to put them in. Then this Flower Arranger will be an outcome, because now you will be able to arrange the flowers nicely in that large vase.

This mold has 9 holes and there is also a mold available with 5 holes, see one of the pictures (for illustrative purposes, this item is only for the mold with 9 holes).

There is also a Holographic version of this mold available and also a mold for a much larger Flower Arranger of 27.5 cm (11") with 21 holes.

Thanks to Atelier 'De Schone Schijn' for the picture with the white Flower Arranger.

Set of two silicone molds for our trays with the Fantasy theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 1 smaller tray, 1 larger tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for an XL Oval tray. The tray is 24 x 35 cm (9 2/5" x 13 3/4") wide, 1 cm (2/5") thick and it is engraved with thin graceful lines.

There are also molds available for matching coasters, a coaster holder and a smaller tray, all engraved with the same graceful line pattern.

This tray is also available in a plain version.

Silicone mold for a large Cascade Geode tray. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a smaller tray mold available with the same cascade design.