All molds

Siliocone mold for a round disc with ribbed edge. The disc is 25 cm (10") wide and  8 mm (1/3") thick.

There are also molds available for a smaller ribbed edge tray of 15 cm (6"), for an XL ribbed edge tray of 35.5 cm (14") and for ribbed edge coasters and matching coaster holder, see one of the pictures (for illustrative purposes, this item is only for the 25 cm disc mold). Some of these molds are also in a set available, for a special setprice.

Silicone mold for a set of eight Holographic (napkin ring) medallions, in the shape of Geode Rocks. Each medallion is 5.5 cm (2 1/6") wide (corner to opposite corner) and 8 mm (about 1/3") thick.

These medallions are the same as our normal Geode medallions, but then with a Holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for 4 round pendants with keychain holes. The pendants are 6 cm (2 1/3") wide and 1 cm (2/5") thick.

There is also a mold available with 9 pendants.

Deep pour silicone mold for a beautiful letter on top of a thick block. The size of the block is 10 x 10 cm (4" x 4") and it's 2 cm (4/5") thick. The letter is 7.5 cm (3") tall and 3 mm (1/9") thick. The width of the letter differs per letter.

This item is for one mold with one letter and you can select any letter of the Alphabet under the 'Available Options'.

The same block molds are also available in a larger version of 15 x 15 cm (6" x 6").

Silicone mold for an extra large (XL) 'Magical' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 3 smaller trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the XL tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a Holographic Geode winebutler, for two glasses. The winebutler is 8 mm (1/3") thick.

The shape of the winebutler is the same as our normal Geode winebutler mold, but then with a holographic color effect, which  will transfer to the surface of your resin winebutler.

Set of two silicone molds for our trays with the Fantasy theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 larger trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a decorative Halloween shield, featuring a Black Scary Cat! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Greet trick-or-treaters with this spooktastic Halloween shield! Featuring a scary 'black' cat, bats and a spiderweb, this Halloween decoration is sure to have visitors “cat-tured” in its bewitchment!

We also have 3 other molds available for a Halloween shield, all with their own decorative design, see one of the the pictures for one of them (for illustrative purposes, this item is only for the 'Scary Cat' shield).

Silicone mold for a deep round disc. The disc is 12 cm (4 3/4") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

The disc mold is suitable for deep pour projects, like flower preservation. We also have a deep pour round mold available in 17 cm (6 2/3"), 22 cm (8 2/3") and in 27 cm (10 2/3").

Silicone mold for a set of eight round (napkin ring) medallions. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).

Silicone mold for a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide, 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.

There are also molds available for a small heart shaped tray / coaster holder (designed for these coasters) and for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

Holographic silicone inlay mold, hexagon shaped. The size of the inlay mold is 19 x 22 cm ( 7 1/2" x  8 2/3") and it is appr. 4 mm (1/6") thick. The inlay mold has a holographic color effect, which will transfer to the surface of your Hexagon tray.

The inlay is specifically matched to the size of our 23 cm (9") Medium Hexagon tray (item MOSH0192) and the thickness of this inlay mold makes it easy to create a tray with raised edge, by using that tray mold.

There is also an inlay mold with a honeycomb engraving available, that has the same size, as shown in one of the pictures (for illustrative purposes, this item is only for the Medium sized holographic inlay mold).

Silicone mold for 10 engraved Gingerbread ornaments. The ornaments are between 7.5 (3") and 8 cm (3 1/6") tall and they are 6 mm (1/4") thick.

There are nine different ornaments, the Gnome ornament is double and the candy stick is mirrored.

Two silicone molds for:

• a set of two round coasters with rough sides. The coasters have a diameter of 12.5 cm (5") and they are 12 mm (1/2") thick. The flat surface of each coaster is about 9 cm (3 1/2"). 
• a round tray with rough sides. The tray has a diameter of 22.5 cm (9") and it is 12 mm (1/2") thick.

These two molds are thick and rough, and still have a shiny surface! Perfect to create a rock-solid set of coasters and tray that will be a beautiful decoration on any table. With your creativity and inspiration, the possibilities with Resin and Acrylic Resin are endless. Don't be afraid to get rough and tough with these molds, let your imagination run wild!

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

Silicone mold for a set of four 'Oriental' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Oriental theme, which further consists of a coaster holder mold, 4 trays and a set of 8 medallions, see one of the pictures for some of them (for illustrative purposes, this item is only for the coasters mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

This mold is also available in a Holographic version.

Silicone mold for a set of 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays with the same graceful line pattern available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

The molds are also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a small Cascade Geode tray. The tray is about 18 cm (7") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the side of the tray a unique cascade-like appearance.

There is also a Geode coaster mold and a larger tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the small tray mold).

Silicone mold for a Tealight Candle Holder with the Holographic Yin Yang symbol. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The symbol is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration, see the pictures. A few of them are pictured in their finished state.

Set of 2 silicone molds for 4 Round Geode coasters and a matching holder. The coasters have the same shape as our round Geode trays, but then smaller, they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters.

The molds are also available seperately.

A set with these two molds and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the coaster and holder mold).

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder!

Silicone mold for an XL Trinket Dish. The Trinket Dish is 17.5 x 35 cm (7" x 14") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

There are also molds for two smaller Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the XL Trinket Dish). The three molds are also available in sets of two or three, for special setprices.