All molds

Silicone mold for a set of 6 large Decorative Christmas Baubles. Each bauble is 10 cm (4") wide, 6 mm (1/4") thick and they all have a raised decorative pattern of 0.75 mm thickness.

We have 4 more Christmas Bauble molds of the same size available, with holographic color effects, with druzy crystal patterns, with engraved Gnomes (8 mm thick) and with a smooth surface.

Four silicone heart shaped inlay molds, with a crystal pattern. The hearts are about 8 cm (3 1/6") large and 3 mm (1/9") thick, so they will fit in every coaster mold.

Deep pour silicone mold for a beautiful letter on top of a thick block. The size of the block is 15 x 15 cm (6" x 6") and it's 2 cm (4/5") thick. The letter is 11 cm (4 1/3") tall and 3 mm (1/9") thick. The width of the letter differs per letter.

This item is for one mold with one letter and you can select any letter of the Alphabet under the 'Available Options'.

The same block molds are also available in a smaller version of 10 x 10 cm (4" x 4").

Silicone mold for a medium sized tray with a Yin Yang symbol engraved into it. Two sunflowers form the symbol and it is the same Yin Yang as we used in the mold for the set of four Yin Yang Sunflower coasters. The tray is 25 cm (10") wide and 8 mm (1/3") thick. 

The tray is also in an 14" XL version available.

Silicone mold for an oval Winebutler with a Holographic Broken Glass pattern. The holographic color effect will transfer into the resin, the end result depends on the colors and color combination that is used in the resin. The winebutler is 8 mm (1/3") thick.

The same design is also available in a smooth version, without pattern.

Silicone mold for 6 small engraved Gingerbread men. The Gingerbread men are 10 cm (4") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 7.5 cm (3") and 20 cm (8") tall.

The video of Claire's Crafty Corner shows how to do the icing lines in the most realistic way.

Silicone mold for an extra large tray with a Yin Yang symbol engraved into it. Two sunflowers form the symbol and it is the same Yin Yang as we used in the mold for the set of four Yin Yang Sunflower coasters. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick. 

The tray is also in a 10" (M) version available.

Silicone mold for 6 Holographic Christmas Star ornaments, with holes for a ribbon or cord. Each star is 10 cm (4") wide and high, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Set of 4 silicone Holographic Inlay molds, with a Flower engraved into them. Each inlay mold is 12.5 cm wide and appr. 3 mm (1/8") thick and they fit perfectly in our 15 cm (6") round molds (geode style, ribbed edge and basic round mold). 

The holographic color effect will transfer to the surface of your resin piece. Please be aware that when you pour a finishing (top) layer over the holographic piece, the holographic effect will be gone! We therefore advise not to use a top coat.

Silicone mold for 4 medium size Christmas Angels with Crystal Wings. Each Angel is 15 cm (6") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 6 Angels of 10 cm (4") tall and one with 2 Angels of 20 cm (8") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Silicone mold for a set of 6 large Christmas Baubles with Decorative Druzy Crystal patterns. Each bauble is 10 cm (4") wide and 6 mm (1/4") thick.

We have 4 more Christmas Bauble molds of the same size available, with holographic color effects, with raised decorative patterns, with engraved Gnomes (8 mm thick) and with a smooth surface.

Silicone mold for a large Oval tray. The tray is 17 x 25 cm (6 2/3" x 9 5/6") wide, 1 cm (2/5") thick and it is engraved with thin graceful lines.

There are also molds available for matching coasters, a coaster holder and an XL tray, all engraved with the same graceful line pattern.

This mold is together with the matching coaster mold and coaster holder mold also as a set of 3 molds available, for a special setprice, see one of the pictures (for illustrative purposes, this item is only for the large oval tray mold).

This tray mold is also available in a plain version.

Silicone mold for 12 extra small Christmas Angels. The angels are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 20 cm (8"). Some of them are also available in a Druzy crystal version.

Silicone mold for two Geode coasters. The coasters are about 12.5 cm (5") wide and 8 mm (1/3") thick.

The shape of the two coasters is based on our original Geode coasters, designed back in 2020 and for which we still have a mold separately available as a set of four Geode coasters.

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a holographic version available.

Two silicone molds for:

• a set of two square Geode-style coasters with rough sides. The coasters are about 12.5 x 12.5 cm (5" x 5") wide and 12 mm (1/2") thick. The flat surface of each coaster is about 9 x 9 cm (3 1/2" x 3 1/2"). 
• a large Rectangular Geode-style tray with rough sides. The tray is about 18 x 31 cm (7" x 12") wide and 12 mm (1/2") thick.

This beautiful set of 2 molds will inspire you to explore your creativity and design your very own unique set. The molds are though, thick and sturdy, the tray and coasters have rough sides and a distinct natural stone-like design, perfect for creating unique works of art. Bring your imagination to life with this exclusive set.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

Silicone mold for a large Holographic Geode tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have matching holographic Geode molds available for coasters, a coaster holder and medallions, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Geode tray mold). The 3 molds are also available in 2 different sets, for special setprices.

Update: We now have the same holographic tray also in a smaller 18 cm (7") version available.