All molds

Two silicone molds for in total 12 Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

Both molds are also available separately. And we have the molds also in a holographic version available.

Silicone mold for a large 'Magical' tray. The tray is 25.5 cm (10") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, 2 smaller trays, a larger tray and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the large tray mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

We have this tray design in 3 more sizes available, 20 cm (8"), 25 cm (10") and 35 cm (14").

A matching set of 4 coasters, the 'Round Geode Coasters (2021), is available as well.

Silicone mold fora Geode winebutler, for two glasses. The winebutler is 8 mm (1/3") thick.

The winebutler mold is also in a holographic version available, for spectacular color effects on the surface of your winebutler!

Silicone mold for a Royal Coaster XL. This supersized coaster is appr. 14.5 x 17 cm (5 2/3" x 6 2/3") and 1.5 cm ( 3/5") thick.

Because of this thickness, it's possible to create beautiful resin 3D-flowers and you can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.

(The tealight candle holder, as seen in one of the pictures, is made with one of our other molds, and both molds are also as a set available).

Silicone mold for 12 cute engraved Christmas ornaments. The ornaments are between 6 cm and 10.5 cm (2 1/3" and 4") high and they are 6 mm (1/4") thick. Each ornament has a hole for a ribbon or cord. 

Set of three silicone molds for our trays with the Fantasy theme. The trays are 15 cm (6"), 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These three molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 1 larger tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for two round coasters with rough sides. The coasters have a diameter of 12.5 cm (5") and they are 12 mm (1/2") thick. The flat surface of each coaster is about 9 cm (3 1/2").

Introducing our mold for two Rough & Tough round coasters! The coasters that you create with this mold may look beaten up, but they are smooth and shiny on the top. They will also be solid as a rock, perfect for protecting your furniture from any spills. And don't worry, the mold can handle your toughest Resin and Acrylic Resin projects.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Silicone mold for an XL Oval tray. The tray is 24 x 35 cm (9 2/5" x 13 3/4") and 1 cm (2/5") thick.

We also have a large oval tray available, see one of the pictures (for illustrative purposes, this item is only for the extra large oval tray mold).

This oval tray is also available with a 'Graceful lines' engraving.

Silicone mold for a large Holographic Fantasy tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have holographic Fantasy molds available for coasters, a coaster holder and medallions, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Fantasy tray mold).

Silicone mold for a Tealight Candle Holder, featuring a Holographic Color Burst. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 7 cm (2 3/4") and 9.5 cm (3 3/4") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a non-holographic version available.

Silicone mold for a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.

There are also Scallop molds available for a matching coaster holder / small tray, trays in different sizes and for medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a shiny Art panel, titled Feathers. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick.

Add an artistic touch to your interior with our shiny 'Feathers' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

The feathers form a continuous pattern, allowing you to place multiple panels next to each other and/or on top of each other for a beautiful artwork.

This mold has a shiny finish, the same design is also available in a 20 mm thick mold with a matte finish, perfect to use with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the shiny 'Feathers' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a set of 4 round coasters with a ribbed edge. The coasters are 10 cm (4") wide and 8 mm (1/3") thick.

There are also molds available for a matching coaster holder and ribbed edge trays in 3 different sizes, see one of the pictures (for illustrative purposes, this item is only for the coaster mold). Some of these molds are also in a set available, for a special setprice.

Silicone mold for a set of four coasters, engraved with the Dahlia Mandala. The coasters are 112 mm (4 2/5") wide and 8 mm (1/3") thick.

This mold is part of the theme 'Dahlia', which also includes the holder for these coasters, a tray and a set of 8 medallions, see some of the pictures (for illustrative purposes, this item is only for the coasters mold).

Silicone mold for a Round Tealight Candle Holder. The candle holder is 8 cm (3 1/6") wide and 6 cm (2 1/3") high.

The candle holder mold is pretty high and therefore very suitable for pouring flowers, for example.

You can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.

We also have 'deep-pour' molds available for other tealight candle holders, as seen in some of the pictures (for illustrative purposes, this item is only for the Round tealight candle holder mold).