Alle Formen

Silicone mold for a set of four round coasters with a decorative 'Merry Christmas' engraving. The coasters are 10 cm ( 4") wide and 8 mm (1/3") thick.

There is also a mold available for a matching holder and both molds are also as a set available.

We also have a set of 3 molds available, with the coaster mold, the holder mold and a 28 cm (11") tray mold, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

Silicone mold for a set of 2 medium sized Decoration eggs. The eggs are 17,5 cm (7") tall and 6 mm (1/4") thick.

The mold can be used to make beautiful decorations for an Easter branch or tree.

We also have molds for smaller decoration eggs (including a holographic egg mold) and a tray in our collection.

Silicone mold for a large Holographic Decoration egg, that can for instance be used to decorate Easter branches or a tree. The egg is 20 cm (8") tall and 6 mm (1/4") thick. The holographic color effect will transfer to the surface of your resin egg.

We also have molds for smaller decoration eggs (including a holographic one) and a tray in our collection.

Set of 3 silicone molds for 4 Round Geode coasters with a matching holder and a large round Geode Tray. The coasters have the same shape as the tray and they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters. The Geode tray is 25 cm (10") wide and 10 mm (2/5") thick. 

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The molds are also separately available.

Silicone mold for 28 Domino stones. These are special stones because the dots are hexagon shaped and the surface of the stones is uneven, which gives each stone a unique look! The stones are 24 mm x 50 mm (appr. 1" x 2") and about 6 mm (1/4") thick.

 A Domino tray mold is separately available, in which the 28 Domino stones can be stored, see one of the pictures (for illustrative purposes, this item is only for the mold for 28 domino stones).

Both molds are also as a set available, for a special setprice.

This mold is especially designed to use together with our mold for eight Hexagon medallions, see one of the pictures (for illustrative purposes, this item is only for the ring mold).

There are also hexagon shaped molds available for two trays, a set of four coasters and a matching coaster holder.

Silicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Silicone mold for 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.

There is also a mold available for a large Pumpkin tray and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin coaster mold).

Silicone mold for 2 large Christmas Angels with Crystal Wings. Each Angel is 20 cm (8") tall and 6 mm (1/4") thick.

We have 2 more Christmas Angel molds with crystal wings available, one with 6 Angels of 10 cm (4") tall and one with 4 Angels of 15 cm (6") tall. Each of these molds is also available in a plain version, without the druzy crystals.

Silicone mold for a holder for Kintsugi coasters (Kintsugi is the Japanese art of fixing broken pottery). The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. 

You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Silicone mold for a set of four coasters, engraved with the Mandala Peacock. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

The coaster mold is part of our 'Peacock Mandala' design line, in which besides this mold are also three cake stand molds (with center hole), a coaster holder and a mold for 8 medallions.

The coaster mold and holder mold are also as a set available, for a special setprice.

Silicone mold for a set of eight decorative (napkin ring) 'Fantasy' medallions. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

The medallion mold is part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 cake stands and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).

We made several of these molds in sets available, for special setprices.

Silicone mold for a large round Wall Hanging. The diameter is 25 cm (10"), 8 mm (1/3") thick and it has two large hanging loops, for putting a cord or ribbon through.

This mold is perfect for crafting stunning resin art to decorate any space. Let your creativity flow and design beautiful, personalized décor that adds a special touch to your home. Elevate your walls with custom-made resin masterpieces!

BOO!

Silicone mold for 8 Holographic Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression. The holographic color effect will transfer to the surface of your resin ghost keychains!

The mold is also available in a version without the holographic color effect. 

Silicone mold for a small Disc and Oval, both perforated with holes that are evenly spaced along the edges.

The disc is 10.5 cm (4") wide, 8 mm (1/3") thick and it has 28 holes. The center space between the holes is 8.3 cm (3 1/4") wide.

The oval is 10.5 x 15 cm (4" x 6") wide, 8 mm (1/3") thick and it has 34 holes. The center space between the holes is 8.3 x 12.8 cm (3 1/4" x 5") wide.

Silicone mold for a square tray with a decorative lead glass 'Daisy bud' pattern. The tray is 24.5 cm x 24.5 cm (9 3/5" x 9 3/5") wide and in total almost 9 mm (1/3") thick. The 'Daisy bud' pattern is 0.75 mm thick and it will be raised on the surface of the tray.

There is also a holographic version of the same tray design available and both versions of this 'Daisy bud' pattern are also available as 5 mm (1/5") thick inlay molds, for our 1 cm and 2 cm deep square tray molds.

Silicone mold for a Holographic Tealight Candle Holder with decorative corners. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The decoration is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.