Alle Formen

Silicone mold for 6 small Holographic Christmas Angels. Each Angel is 10 cm (4") tall, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas angels.

We also have a mold available for 4 Holographic Christmas Angels of 15 cm (6") each, see one of the pictures (for illustrative purposes, this item is only for the mold with 6 Christmas Angels).

Both molds are also available in a version without the holographic color effect and  in a version with druzy crystal Angel wings.

Silicone mold for a large Trinket Dish. The Trinket Dish is 15 x 30 cm (6" x 12") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are also molds for a smaller and larger Trinket Dish available, see one of the pictures (for illlustrative purposes, this item is only for the large Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for a small Disc and Oval, both perforated with holes that are evenly spaced along the edges.

The disc is 10.5 cm (4") wide, 8 mm (1/3") thick and it has 28 holes. The center space between the holes is 8.3 cm (3 1/4") wide.

The oval is 10.5 x 15 cm (4" x 6") wide, 8 mm (1/3") thick and it has 34 holes. The center space between the holes is 8.3 x 12.8 cm (3 1/4" x 5") wide.

Silicone mold for a set of 4 Oval coasters. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.

There are also molds for a matching coaster holder and for two oval trays available, see one of the pictures (for illustrative purposes, this item is only for the oval coaster mold).

We have the molds also in two sets available (coasters with holder, coasters with holder and large tray), for special setprices.

There is also a mold available for the same size oval coasters, but then engraved with thin 'Graceful lines'.

Silicone mold for a set of eight decorative Scallop medallions. Each medallion is 5.5 cm (2 1/6") x  4.8 cm (1 9/10") and 8 mm (1/3") thick.

There are also Scallop molds available for a set of 4 coasters, a matching coaster holder / small tray and two larger trays, see one of the pictures (for illustrative purposes, this item is only for the medallions mold).

Some of the scallop molds are also in two different sets available (coasters with holder, coasters with holder and large tray), for special setprices.

Silicone mold for a large Cup tray. The tray is 25 cm (10") wide, 18 cm (7") high and 8 mm (1/3") thick.

There is also a mold for a set of 4 Cup coasters available, see one of the pictures (for illustrative purposes, this item is only for the Cup tray mold). Both molds are also available as a set, for a special setprice.

Siliocone mold for a round disc with ribbed edge. The disc is 15 cm (6") wide and  8 mm (1/3") thick.

There are also molds available for two larger ribbed edge trays of 25 cm (10") and 35.5 cm (14) and for ribbed edge coasters and matching coaster holder, see one of the pictures (for illustrative purposes, this item is only for the 15 cm disc mold).

Silicone mold for a square tray with a 'Tetris' pattern. The tray is 28 x 28 cm (11" x 11") wide, 1 cm (2/5") thick and has a raised edge.

The tray is part of several molds with the 'Tetris' pattern, see the pictures (for illustrative purposes, this item is only for the tray mold).

Set of two silicone molds for four irregular shaped Geode coasters and a matching holder. The Coasters are approx. 12.5 cm (5") wide and 10 mm (2/5") thick. The holder is 10 mm (2/5") thick.

Cure your thirst for something original with this set of 2 molds! The Geode coasters mold has an irregular shape and it comes with a holder mold, making it a unique set. Your guests won't be able to resist the 'rock'ing atmosphere! ;)

The molds are also available separately.

Silicone mold for a large Druzy (crystal) Oval Trinket Dish. The external dimensions are 28 x 20 cm (11" x 8") and the internal dimensions are 23.5 x 15 cm (9 1/4" x 6"). The total height of the trinket dish is 18 mm ( 3/4"), with a raised inner edge of 9 mm (1/3"). The shiny bottom of the dish is 9 mm (1/3") thick.

Resin quantity: approx. 480 gr. (17 oz)

A true one-of-a-kind! This mold brings a fresh, elegant shape to resin artistry. The smooth oval design offers a refined alternative to traditional round dishes, while the glossy crystal texture adds a mesmerizing sparkle. With plenty of depth for layering, color blending, and creative inclusions, this mold is perfect for crafting stylish jewelry trays, decorative accents, or statement resin pieces. Dare to be different and create something truly special!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a large round Wall Hanging. The diameter is 25 cm (10"), 8 mm (1/3") thick and it has two large hanging loops, for putting a cord or ribbon through.

This mold is perfect for crafting stunning resin art to decorate any space. Let your creativity flow and design beautiful, personalized décor that adds a special touch to your home. Elevate your walls with custom-made resin masterpieces!

Four silicone inlay molds featuring an engraved Cute Gnome. The molds are 9.2 cm (3 2/3") wide and appr. 3 mm (1/9") thick.

These inlay molds are a perfect match for our round coaster mold, or even for our mold for a Coffee and Cookies serving tray, as shown in one of the pictures (artist: Petra van Vlaanderen), resulting in a creation with a raised edge and a beautiful design.

We also have other round inlay molds available with different patterns.

Two silicone molds for:

• 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.
• a large Pumpkin tray. The tray is 28 cm (11") wide, 27 cm (10 2/3") tall and 8 mm (1/3") thick.

Make your Halloween spooktacular with these 2 molds, perfect for adding a touch of autumnal fun to your seasonal decorations. Trick or treat!

The molds are also available separately.

Silicone mold for a Rectangular tray. The tray is 15 x 30 cm (6" x 12") and 1 cm (2/5") thick.

Silicone mold for a Flower Arranger with a diameter of 17 cm (6 2/3").

It's a known 'problem', you sometimes get a nice little bouquet of flowers, but you only have a vase that is too big to put them in. Then this Flower Arranger will be an outcome, because now you will be able to arrange the flowers nicely in that large vase.

This mold has 5 holes and there is also a mold available with 9 holess, see one of the pictures (for illustrative purposes, this item is only for the mold with 5 holes).

There is also a Holographic version of this mold available and also a mold for a much larger Flower Arranger of 27.5 cm (11") with 21 holes.

Thanks to Atelier 'De Schone Schijn' for the pictures with the white Flower Arranger.

Silicone mold for a holder for four coasters. It can hold four coasters which are maximum 6 mm (1/4") thick. The edge of the holder is coarsened and it is especially designed for our Slate coasters, for which we have a mold available too.

The holder mold and coaster mold are also as a set available, for a special setprice.

Silicone mold for a large round tray with rough sides. The tray has a diameter of 22.5 cm (9") and it is 12 mm (1/2") thick.

Introducing our mold for a Rough & Tough round tray! Create a unique decorative tray with rough edges and a shiny surface. The mold is thick and large, perfect to showcase your creativity. The result will be a true masterpiece, whether you made the tray with resin or acrylic resin.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

The Rough & Tough molds are also available in different sets of two molds, for special setprices.

Three silicone molds for a large 3-tier cake stand, engraved with the Peacock Mandala. The cake stands are 18 cm (7"), 24 cm (9 2/5") and 30 cm (11 4/5") wide and 8 mm (1/3") thick. The centers have a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The molds are part of our 'Peacock Mandala' design line, in which besides these molds are also a set of four coasters, a coaster holder and a mold for 8 medallions.

Silicone mold for a decorative Halloween shield, featuring an Evil Pumpkin! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

This Halloween shield is perfect for those looking to send a chill down their guests' spines! With an evil pumpkin and menacing bats, it's sure to be the spookiest decoration on the block! Hauntingly good fun!

We also have 3 other molds available for a Halloween shield, all with their own decorative design, see one of the the pictures for one of them (for illustrative purposes, this item is only for the 'Evil Pumpkin' shield).

Set of 2 Holographic silicone molds for 4 Geode coasters and a matching holder. The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is specifically designed for these coasters and both molds have a holographic color effect, which  will transfer to the surface of your resin coasters.

The molds are also available separately.

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a set of eight decorative (napkin ring) medallions, shaped as a Geranium flower. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

(The mold for the rings is separately available).